How to Install Cisco CP Express Admin View on Your Router
Cisco CP Express Admin View is a web-based graphical user interface (GUI) that allows you to configure and monitor your Cisco access router. It simplifies router, firewall, intrusion prevention system (IPS), VPN, Unified Communications, WAN, and LAN
configuration with easy-to-use wizards[^3^].

In this article, we will show you how to download and install Cisco CP Express Admin View on your router's flash memory using a TFTP server. You will also learn how to enable HTTP or HTTPS server on your router and access Cisco CP Express Admin View from
your web browser.

Cisco.config.pro.exp.admin.k9.2.7.en.zip.rar
Download Zip https://t.co/EyW3EbmtJP



Downloading Cisco CP Express Admin View
To download Cisco CP Express Admin View, you need to have a Cisco account and login credentials. If you do not have them, you can register for free at Cisco Support. Once you have your login credentials, follow these steps:


Launch your web browser and go to the following link: Cisco Configuration Professional Express 3.5 Download Page.
When a login page appears, enter your login credentials and click Log In.
From the Download Software page, choose the release to download. The latest release is 3.5.
Select the Cisco Configuration Professional Express 3.5 package link and click Download to download the compressed file, cisco-config-pro-exp-admin-k9-3_5-en.zip to your system. This compressed file contains the Cisco CP Express Admin View installation
files[^1^].

Installing Cisco CP Express Admin View
To install the Cisco CP Express Admin View on your router's flash memory, you need to have a TFTP server running on your system or network. You also need to extract the compressed file that you downloaded in the previous section. After that, follow these
steps:


Using an FTP or TFTP client, copy the extracted file ccpexpressAdmin3_5_en.tar onto the router's flash memory. For example, you can use the following commands on the router's CLI:
router> enable
Password: password
router# copy tftp: flash
Address or name of remote host []? <xxx.xxx.xxx.xxx>
Source filename []? ccpexpressAdmin_3_5_en.tar
Destination file name []? ccpexpressAdmin_3_5_en.tar

Extract the ccpexpressAdmin3_5_en.tar file onto the router's flash memory using the following command:
router# archive tar /xtract flash:ccpexpressAdmin_3_5_en.tar flash:/

After the installation is complete, delete the ccpexpressAdmin_3_5_en.tar file from the flash memory of the router using the following command:
router# delete flash:ccpexpressAdmin_3_5_en.tar

Press Return to confirm the deletion.

Using Cisco CP Express Admin View
To use Cisco CP Express Admin View, you need to enable HTTP or HTTPS server on your router and configure an IP address on one of its interfaces. You also need to set up a username and password for accessing the GUI. For example, you can use the following
commands on the router's CLI:



router> enable
Password: password
router# configure terminal
router(config)# ip http server
router(config)# ip http secure-server
router(config)# interface gigabitethernet 0/0
router(config-if)# ip address 192.168.1.1 255.255.255.0
router(config-if)# no shutdown
router(config-if)# exit
router(config)# username admin privilege 15 secret cisco
router(config)#
35727fac0c

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)