1. Forum
  2. Usenet
  3. REC.WOODWORKING

  • hitachi F1000a jointer tables are not level

    From Barry Miller@21:1/5 to All on Thu Mar 17 20:57:02 2022
    The infeed table tilts down at the frontend relative to the outfeed table.

    The result is that pieces come out bowed.

    Need instructions for adjusting the infeed table. The manual doesn't talk about it.

    Regards and thanks

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From krw@notreal.com@21:1/5 to ranier25@gmail.com on Fri Mar 18 15:33:53 2022
    On Thu, 17 Mar 2022 20:57:02 -0700 (PDT), Barry Miller
    <ranier25@gmail.com> wrote:

    The infeed table tilts down at the frontend relative to the outfeed table.

    The result is that pieces come out bowed.

    Need instructions for adjusting the infeed table. The manual doesn't talk about it.

    Regards and thanks.

    I don't know much about that jointer, specifically but dovetail
    jointers tend to work along a similar idea. Take a look at this site
    for some hints:
    <https://www.woodmagazine.com/tuning-up-your-jointer>

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)