• OT: Old Tow Strap

    From Bob La Londe@21:1/5 to All on Sun Dec 31 14:10:57 2023
    Other then pulling metal out of the sand (or mud) this is not a metal
    related post.

    You can see pictures here: https://www.yumabassman.com/2023/12/31/old-tow-strap-a-little-different/

    I’m looking for an old strap I bought about 30 years ago. I actually
    bought three of them.

    I know. I know. You may want to tell what you use. You can if you want.
    I may even have some of what you use, but for the purpose of this post I
    just don’t care.

    I still have one left in good condition. I broke one pulling out trees,
    and one got partially soak with paint by an employee behind the seat of
    one of my service trucks.

    It looks and feels like braided nylon rope, except it’s not a round
    rope. Its two flat pieces of thick strap about an inch (or a smidge
    more) wide that are braided together every 1-1/2 to 2 inches. They are
    neat because you NEVER have to tie a knot in them, and they do not come
    with a big thick loop on the end that can be hard to get through tight
    places.

    You can snake it through a tight space easily, and then complete the
    loop by lacing it through itself 6-7 times. It sounds odd, but it does
    not slip out. If you need a longer pull you can lace two of them
    together end to end by lacing one through the other. No matter how hard
    you pull the connection comes apart easily when you let the tension off.
    Before any of you all say I am full of it. Remember. I have had them for
    30 years, and I’ve used them this way many times.

    I loaned one to somebody once (JUST ONCE), said “DO NOT TIE A KNOT IN
    IT,” and showed them the correct way to make a loop. They brought it
    back with a loop tied in one end. The next time they needed to borrow a
    tow strap I told them I didn’t have one they were able to use.

    They were not super cheap back in the day, but they can’t have been
    crazy expensive either. I wasn’t making much money back then, and I
    still remember buying three of them. One for each service truck I had at
    the time. I don’t recall exactly what the rated load was, but I remember being surprised by how heavy it was.

    Anyway, do any of you know if they still make these and where to buy them?



    --
    Bob La Londe
    CNC Molds N Stuff

    --
    This email has been checked for viruses by AVG antivirus software.
    www.avg.com

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Leon Fisk@21:1/5 to Bob La Londe on Mon Jan 1 12:07:32 2024
    On Sun, 31 Dec 2023 14:10:57 -0700
    Bob La Londe <none@none.com99> wrote:

    <snip>
    It looks and feels like braided nylon rope, except it’s not a round
    rope. Its two flat pieces of thick strap about an inch (or a smidge
    more) wide that are braided together every 1-1/2 to 2 inches. They are
    neat because you NEVER have to tie a knot in them, and they do not come
    with a big thick loop on the end that can be hard to get through tight >places.

    Maybe this "SpeedStrap"?

    https://www.amazon.com/SpeedStrap-34130-Weavable-Recovery-Strap/dp/B07B7SQV6X?th=1

    --
    Leon Fisk
    Grand Rapids MI

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Bob La Londe@21:1/5 to Leon Fisk on Mon Jan 1 13:09:09 2024
    On 1/1/2024 9:07 AM, Leon Fisk wrote:
    On Sun, 31 Dec 2023 14:10:57 -0700
    Bob La Londe <none@none.com99> wrote:

    <snip>
    It looks and feels like braided nylon rope, except it’s not a round
    rope. Its two flat pieces of thick strap about an inch (or a smidge
    more) wide that are braided together every 1-1/2 to 2 inches. They are
    neat because you NEVER have to tie a knot in them, and they do not come
    with a big thick loop on the end that can be hard to get through tight
    places.

    Maybe this "SpeedStrap"?

    https://www.amazon.com/SpeedStrap-34130-Weavable-Recovery-Strap/dp/B07B7SQV6X?th=1



    Speedstrap is the closest I have found, but the weight rating is lower.
    Maybe a difference in safety standards in 30 years since I bought the
    first ones.

    --
    Bob La Londe
    CNC Molds N Stuff


    --
    This email has been checked for viruses by AVG antivirus software.
    www.avg.com

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Leon Fisk@21:1/5 to Bob La Londe on Mon Jan 1 17:11:18 2024
    On Mon, 1 Jan 2024 13:09:09 -0700
    Bob La Londe <none@none.com99> wrote:

    <snip>
    Speedstrap is the closest I have found, but the weight rating is lower. >Maybe a difference in safety standards in 30 years since I bought the
    first ones.

    Seems they have different sizes. Maybe this one?

    https://www.amazon.com/SpeedStrap-34230-Weavable-Recovery-Strap/dp/B07B7WZB37/

    "SpeedStrap Big Daddy Weavable Recovery Tow Strap 2" x 30' – Heavy Duty 14,000lb Break Strength – Emergency Towing Rope for Offroad 4x4, Jeep,
    Truck, Buggy, Boats"

    --
    Leon Fisk
    Grand Rapids MI

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From danny burstein@21:1/5 to Bob La Londe on Mon Jan 1 22:11:17 2024
    In <umv656$2ant8$1@dont-email.me> Bob La Londe <none@none.com99> writes:

    [snip]
    Maybe this "SpeedStrap"?

    https://www.amazon.com/SpeedStrap-34130-Weavable-Recovery-Strap/dp/B07B7SQV6X?th=1



    Speedstrap is the closest I have found, but the weight rating is lower.
    Maybe a difference in safety standards in 30 years since I bought the
    first ones.

    Similarly, have you noticed how gravity has gotten stronger over
    the decades, stairs have gotten higher, typefaces in newspapers
    and books has gotten smaller...

    --
    _____________________________________________________
    Knowledge may be power, but communications is the key
    dannyb@panix.com
    [to foil spammers, my address has been double rot-13 encoded]

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Bob La Londe@21:1/5 to danny burstein on Mon Jan 1 15:20:19 2024
    On 1/1/2024 3:11 PM, danny burstein wrote:
    In <umv656$2ant8$1@dont-email.me> Bob La Londe <none@none.com99> writes:

    [snip]
    Maybe this "SpeedStrap"?

    https://www.amazon.com/SpeedStrap-34130-Weavable-Recovery-Strap/dp/B07B7SQV6X?th=1



    Speedstrap is the closest I have found, but the weight rating is lower.
    Maybe a difference in safety standards in 30 years since I bought the
    first ones.

    Similarly, have you noticed how gravity has gotten stronger over
    the decades, stairs have gotten higher, typefaces in newspapers
    and books has gotten smaller...


    No, but I have gotten older, and safety standards have changed.

    --
    Bob La Londe
    CNC Molds N Stuff


    --
    This email has been checked for viruses by AVG antivirus software.
    www.avg.com

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Clare Snyder@21:1/5 to All on Mon Jan 1 23:00:59 2024
    On Sun, 31 Dec 2023 14:10:57 -0700, Bob La Londe <none@none.com99>
    wrote:

    Other then pulling metal out of the sand (or mud) this is not a metal
    related post.

    You can see pictures here: >https://www.yumabassman.com/2023/12/31/old-tow-strap-a-little-different/

    Im looking for an old strap I bought about 30 years ago. I actually
    bought three of them.

    I know. I know. You may want to tell what you use. You can if you want.
    I may even have some of what you use, but for the purpose of this post I
    just dont care.

    I still have one left in good condition. I broke one pulling out trees,
    and one got partially soak with paint by an employee behind the seat of
    one of my service trucks.

    It looks and feels like braided nylon rope, except its not a round
    rope. Its two flat pieces of thick strap about an inch (or a smidge
    more) wide that are braided together every 1-1/2 to 2 inches. They are
    neat because you NEVER have to tie a knot in them, and they do not come
    with a big thick loop on the end that can be hard to get through tight >places.

    You can snake it through a tight space easily, and then complete the
    loop by lacing it through itself 6-7 times. It sounds odd, but it does
    not slip out. If you need a longer pull you can lace two of them
    together end to end by lacing one through the other. No matter how hard
    you pull the connection comes apart easily when you let the tension off. >Before any of you all say I am full of it. Remember. I have had them for
    30 years, and Ive used them this way many times.

    I loaned one to somebody once (JUST ONCE), said DO NOT TIE A KNOT IN
    IT, and showed them the correct way to make a loop. They brought it
    back with a loop tied in one end. The next time they needed to borrow a
    tow strap I told them I didnt have one they were able to use.

    They were not super cheap back in the day, but they cant have been
    crazy expensive either. I wasnt making much money back then, and I
    still remember buying three of them. One for each service truck I had at
    the time. I dont recall exactly what the rated load was, but I remember >being surprised by how heavy it was.

    Anyway, do any of you know if they still make these and where to buy them?



    --
    Bob La Londe
    CNC Molds N Stuff
    I have abiut half a dozen of them but they have loops in them at both
    ends. Virtually i They are about 8 feet long.dentical
    construction.Can't remember where I got them but they were from some
    "materials handling" application - think "lift slings", not "tow
    straps". They would be wrapped around bundles of pipe or shannel or
    wood or whatever - one end through the loop at the other end, then the
    loop slipped over the fork of a fork-lift to pick the stuff up.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Gerry@21:1/5 to dannyb@panix.com on Mon Jan 1 23:31:07 2024
    On Mon, 1 Jan 2024 22:11:17 -0000 (UTC), danny burstein
    <dannyb@panix.com> wrote:

    In <umv656$2ant8$1@dont-email.me> Bob La Londe <none@none.com99> writes:

    [snip]
    Maybe this "SpeedStrap"?

    https://www.amazon.com/SpeedStrap-34130-Weavable-Recovery-Strap/dp/B07B7SQV6X?th=1



    Speedstrap is the closest I have found, but the weight rating is lower. >>Maybe a difference in safety standards in 30 years since I bought the
    first ones.

    Similarly, have you noticed how gravity has gotten stronger over
    the decades, stairs have gotten higher, typefaces in newspapers
    and books has gotten smaller...
    And my legs have grown longer (when puting on my socks and shoes)!!

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Bob La Londe@21:1/5 to Clare Snyder on Tue Jan 2 14:40:44 2024
    On 1/1/2024 9:00 PM, Clare Snyder wrote:
    On Sun, 31 Dec 2023 14:10:57 -0700, Bob La Londe <none@none.com99>
    wrote:

    Other then pulling metal out of the sand (or mud) this is not a metal
    related post.

    You can see pictures here:
    https://www.yumabassman.com/2023/12/31/old-tow-strap-a-little-different/

    I’m looking for an old strap I bought about 30 years ago. I actually
    bought three of them.

    I know. I know. You may want to tell what you use. You can if you want.
    I may even have some of what you use, but for the purpose of this post I
    just don’t care.

    I still have one left in good condition. I broke one pulling out trees,
    and one got partially soak with paint by an employee behind the seat of
    one of my service trucks.

    It looks and feels like braided nylon rope, except it’s not a round
    rope. Its two flat pieces of thick strap about an inch (or a smidge
    more) wide that are braided together every 1-1/2 to 2 inches. They are
    neat because you NEVER have to tie a knot in them, and they do not come
    with a big thick loop on the end that can be hard to get through tight
    places.

    You can snake it through a tight space easily, and then complete the
    loop by lacing it through itself 6-7 times. It sounds odd, but it does
    not slip out. If you need a longer pull you can lace two of them
    together end to end by lacing one through the other. No matter how hard
    you pull the connection comes apart easily when you let the tension off.
    Before any of you all say I am full of it. Remember. I have had them for
    30 years, and I’ve used them this way many times.

    I loaned one to somebody once (JUST ONCE), said “DO NOT TIE A KNOT IN
    IT,” and showed them the correct way to make a loop. They brought it
    back with a loop tied in one end. The next time they needed to borrow a
    tow strap I told them I didn’t have one they were able to use.

    They were not super cheap back in the day, but they can’t have been
    crazy expensive either. I wasn’t making much money back then, and I
    still remember buying three of them. One for each service truck I had at
    the time. I don’t recall exactly what the rated load was, but I remember >> being surprised by how heavy it was.

    Anyway, do any of you know if they still make these and where to buy them? >>


    --
    Bob La Londe
    CNC Molds N Stuff
    I have abiut half a dozen of them but they have loops in them at both
    ends. Virtually i They are about 8 feet long.dentical
    construction.Can't remember where I got them but they were from some "materials handling" application - think "lift slings", not "tow
    straps". They would be wrapped around bundles of pipe or shannel or
    wood or whatever - one end through the loop at the other end, then the
    loop slipped over the fork of a fork-lift to pick the stuff up.

    I do recall they had a lift rating, and I did use them to lace a cradle
    to lift the boulders my neighbor placed around his mail box and around
    his flag pole. Mostly they got used for pulling over the years. I hate
    to put down the numbers I remember, because I am sure they must be
    wrong, but I seem to recall 10K snap strength and 20K rolling load. It
    sounds odd now reading it back. I don't recall the lift rating, but I
    am sure it was less.

    I happened to be working at Tool & Supply at the time, and I was there
    when the company salesman was pitching them to the store owner. Maybe
    some of what I recall was his sales hype.

    I was working at Tool & Supply and starting my contracting business at
    the same time.

    --
    Bob La Londe
    CNC Molds N Stuff


    --
    This email has been checked for viruses by AVG antivirus software.
    www.avg.com

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)