Just took delivery of one of these.
Everything was in the box, except setup instructions.
It has multiple sockets (VGA, BNC, HDMI etc)and al the leads to match.
The power supply plug's 12 volt lead is too short but I ordered an
extension for £1.99 including postage.
No arguments so far but I am using HDMI for connection to my computer
and cannot seem to set it up in order to get a signal.
The supplier sent me links to two videos, neither of which explian the setting up procedure. If anyone has bought one of these and mastered the technique, please let me know.
pinnerite <pinnerite@gmail.com> wrote:
Just took delivery of one of these.
Everything was in the box, except setup instructions.
It has multiple sockets (VGA, BNC, HDMI etc)and al the leads to match.
The power supply plug's 12 volt lead is too short but I ordered an
extension for £1.99 including postage.
No arguments so far but I am using HDMI for connection to my computer
and cannot seem to set it up in order to get a signal.
The supplier sent me links to two videos, neither of which explian the
setting up procedure. If anyone has bought one of these and mastered the
technique, please let me know.
You may wish to supply a link to the item (and the videos?), as your description doesn't leave much to go on.
Theo
On 25/06/2023 21:11, pinnerite wrote:
Just took delivery of one of these.
Everything was in the box, except setup instructions.
It has multiple sockets (VGA, BNC, HDMI etc)and al the leads to match.
The power supply plug's 12 volt lead is too short but I ordered an
extension for £1.99 including postage.
No arguments so far but I am using HDMI for connection to my computer
and cannot seem to set it up in order to get a signal.
What does the following print out?
xrandr --listmonitors --verbose
On 6/26/2023 9:39 AM, Adrian Caspersz wrote:
On 25/06/2023 21:11, pinnerite wrote:
Just took delivery of one of these.
Everything was in the box, except setup instructions.
It has multiple sockets (VGA, BNC, HDMI etc)and al the leads to match.
The power supply plug's 12 volt lead is too short but I ordered an
extension for £1.99 including postage.
No arguments so far but I am using HDMI for connection to my computer
and cannot seem to set it up in order to get a signal.
What does the following print out?
xrandr --listmonitors --verbose
I hope he has a known-good monitor plus the new monitor
connected at the same time, so he can test that way.
It's possible this is the computer with the two vid cards.
Paul
On 6/25/2023 4:14 PM, Theo wrote:
pinnerite <pinnerite@gmail.com> wrote:
Just took delivery of one of these.
Everything was in the box, except setup instructions.
It has multiple sockets (VGA, BNC, HDMI etc)and al the leads to match.
The power supply plug's 12 volt lead is too short but I ordered an
extension for £1.99 including postage.
No arguments so far but I am using HDMI for connection to my computer
and cannot seem to set it up in order to get a signal.
The supplier sent me links to two videos, neither of which explian the
setting up procedure. If anyone has bought one of these and mastered the >> technique, please let me know.
You may wish to supply a link to the item (and the videos?), as your description doesn't leave much to go on.
Theo
A random sampling of units meeting this description,
shows they have no technical descriptions whatsoever.
No manual to download. No list of resolutions we
might expect from the serial EDID, and so on.
One unit, had the cheek to advertise 1920x1200 resolution,
when the photo of the unit shows it is not 16:10 but is 16:9
and 1920x1080.
On such crapulent merch, I would plug in only *one* data cable
to start, as the EDID lines may be shared.
Occasionally, a display supports only 1920x1080 and 1280x720 on
the HDMI port, and that might sometimes be termed a "non-PC HDMI".
On computer video cards, if no EDID is sensed, the driver selects
1024x768, 800x600, or 640x480. And if these resolutions are
not supported by the display, you get black screen. It is likely
in this case, the product has a scaler inside, so I'm not too worried
it's devoid of conditioning on the input board.
I have a suspicion that even when we get the web page link to
this carcass, it'll be documentation-free and a mystery meat.
*******
A person who plays with mystery meat products like this for
an LCD display, should invest in an "EDID box". This is a box
that sends a fake EDID to the Linux computer, the Linux computer
thinks it is a real 1920x1080 device, and then by chance the signal
is something the monitor actually works with.
On old Macintosh boxes, you could get a display adapter connector
with DIP switches on it, and you could send "fake" Apple codes for
monitor resolution selection. Which is just like EDID in a sense,
but for an earlier generation based on "sense lines". It's possible
even early PCs used *some* sense lines, but not the same exact
setup as the Mac at the time.
But today, for manually setting up equipment, without a lot of
pissing around, you'd want an EDID box. Instead of using sense
lines, like in the old days, there is a data and a clock pin, and
the video card end "reads" the EEPROM inside the monitor.
A cheap monitor can be missing the EDID hardware. Some "projectors"
are an example of such. Even my Sony Trinitron monitor, with the
five coax cables for input (RGBHV), it was missing EDID as well.
I used a Mac switch dongle, to get the computer to generate a resolution
the multisync Sony supported.
This one for example, it sucks up the EDID from an existing healthy
monitor, then you plug the duff monitor in place of the healthy monitor,
and when the other end is plugged into the computer, it is getting
the serial information the healthy monitor produced. This box is way
to expensive for home usage. Still, an interesting box.
https://www.blackbox.com/en-ca/store/product/detail/hdmi-edid-ghost/vg-hdmi
Gefen made stuff like this too, and might be used when searching
for the older EDID solutions. The earlier Gefen ones might have been cheaper.
https://www.bhphotovideo.com/c/product/1029274-REG/gefen_ext_hd_edidpn_hdmi_detective_plus.html/specs
I was hoping to find something for $50, but I guess I'm delusional.
It's a pretty simple function, to be charging so much money.
You can make your own with the appropriate serial EEPROM. That
would be a minimal implementation.
Linux should have a "readEDID" program, and you can test that
on your working monitor. Plug the duff monitor in as the "Second"
monitor, and try "readEDID" on that too. If it comes back 0xFFFF style,
then there might be no EDID chip in it.
On Windows, you use Entechtaiwan "Moninfo" program, and select
"real time mode" and that can read the EDID and show you what it
contains. Both OSes have some solution for the forensics needed.
Paul
On 6/25/2023 4:14 PM, Theo wrote:
pinnerite <pinnerite@gmail.com> wrote:
Just took delivery of one of these.
Everything was in the box, except setup instructions.
It has multiple sockets (VGA, BNC, HDMI etc)and al the leads to match.
The power supply plug's 12 volt lead is too short but I ordered an
extension for £1.99 including postage.
No arguments so far but I am using HDMI for connection to my computer
and cannot seem to set it up in order to get a signal.
The supplier sent me links to two videos, neither of which explian the
setting up procedure. If anyone has bought one of these and mastered
the
technique, please let me know.
You may wish to supply a link to the item (and the videos?), as your description doesn't leave much to go on.
Theo
A random sampling of units meeting this description,
shows they have no technical descriptions whatsoever.
No manual to download. No list of resolutions we
might expect from the serial EDID, and so on.
One unit, had the cheek to advertise 1920x1200 resolution,
when the photo of the unit shows it is not 16:10 but is 16:9
and 1920x1080.
On such crapulent merch, I would plug in only *one* data cable
to start, as the EDID lines may be shared.
Occasionally, a display supports only 1920x1080 and 1280x720 on
the HDMI port, and that might sometimes be termed a "non-PC HDMI".
On computer video cards, if no EDID is sensed, the driver selects
1024x768, 800x600, or 640x480. And if these resolutions are
not supported by the display, you get black screen. It is likely
in this case, the product has a scaler inside, so I'm not too worried
it's devoid of conditioning on the input board.
I have a suspicion that even when we get the web page link to
this carcass, it'll be documentation-free and a mystery meat.
*******
A person who plays with mystery meat products like this for
an LCD display, should invest in an "EDID box". This is a box
that sends a fake EDID to the Linux computer, the Linux computer
thinks it is a real 1920x1080 device, and then by chance the signal
is something the monitor actually works with.
On old Macintosh boxes, you could get a display adapter connector
with DIP switches on it, and you could send "fake" Apple codes for
monitor resolution selection. Which is just like EDID in a sense,
but for an earlier generation based on "sense lines". It's possible
even early PCs used *some* sense lines, but not the same exact
setup as the Mac at the time.
But today, for manually setting up equipment, without a lot of
pissing around, you'd want an EDID box. Instead of using sense
lines, like in the old days, there is a data and a clock pin, and
the video card end "reads" the EEPROM inside the monitor.
A cheap monitor can be missing the EDID hardware. Some "projectors"
are an example of such. Even my Sony Trinitron monitor, with the
five coax cables for input (RGBHV), it was missing EDID as well.
I used a Mac switch dongle, to get the computer to generate a resolution
the multisync Sony supported.
This one for example, it sucks up the EDID from an existing healthy
monitor, then you plug the duff monitor in place of the healthy monitor,
and when the other end is plugged into the computer, it is getting
the serial information the healthy monitor produced. This box is way
to expensive for home usage. Still, an interesting box.
https://www.blackbox.com/en-ca/store/product/detail/hdmi-edid-ghost/vg-hdmi
Gefen made stuff like this too, and might be used when searching
for the older EDID solutions. The earlier Gefen ones might have been
cheaper.
https://www.bhphotovideo.com/c/product/1029274-REG/gefen_ext_hd_edidpn_hdmi_detective_plus.html/specs
I was hoping to find something for $50, but I guess I'm delusional.
It's a pretty simple function, to be charging so much money.
You can make your own with the appropriate serial EEPROM. That
would be a minimal implementation.
Linux should have a "readEDID" program, and you can test that
on your working monitor. Plug the duff monitor in as the "Second"
monitor, and try "readEDID" on that too. If it comes back 0xFFFF style,
then there might be no EDID chip in it.
On Windows, you use Entechtaiwan "Moninfo" program, and select
"real time mode" and that can read the EDID and show you what it
contains. Both OSes have some solution for the forensics needed.
Paul
| Sysop: | Keyop |
|---|---|
| Location: | Huddersfield, West Yorkshire, UK |
| Users: | 304 |
| Nodes: | 16 (2 / 14) |
| Uptime: | 32:12:44 |
| Calls: | 6,820 |
| Files: | 12,335 |
| Messages: | 5,406,984 |