hey all
having a problem...
followed the two paes in the wiki about getting dosemu to work, but i can't get the doors to run.
the bbs starts dosemu fine but it doesnt appear to be creating the d: and e: drives, so external.bat
doesn't run therefore dosemu exits.
so needless to say im a bit confused... do i need to re-enable the lredir lines? but i can't see it being that as it doesnt
appear to be even getting that far.
--------------------------------------
dosemu.ini
the first one is the original one that was there, the second line is the one from the wiki (
https://wiki.synchro.net/howto:dosemu2 ), but they both
do the same thing. any thoughts?
cmd=/usr/bin/env $TERM HOME=$CTRLDIR QUIET=1 DOSDRIVE_D=$NODEDIR NODEDIR=$NODEDIR $DOSEMUBIN -I"video { none }" $VIRTUALCONF -f$DOSEMUCONF -E$EXTBAT -o$NODEDIRdosemu_boot.log $EXTLOG
[stdio]
cmd=/usr/bin/env $TERM HOME=$CTRLDIR QUIET=1 DOSDRIVE_D=$NODEDIR NODEDIR=$NODEDIR $DOSEMUBIN -I"video { none }" -I'keystroke "\n"' $VIRTUALCONF -f$DOSEMUCONF -E$EXTBAT -o$NODEDIRdosemu_boot.log $EXTLOG
#cmd=/usr/bin/env $TERM HOME=$CTRLDIR QUIET=1 DOSDRIVE_D=$NODEDIR DOSDRIVE_E=$XTRNDIR DOSDRIVE_F=$CTRLDIR DOSDRIVE_G=$DATADIR DOSDRIVE_H=$EXECDIR NODEDIR=$NODEDIR $DOSEMUBIN SHELL_LOADHIGH_DEFAULT=0 -d $NODEDIR -d $XTRNDIR -I"video { none }" $VIRTUALCONF -f$DOSEMUCONF -E$EXTBAT -o$NODEDIRdosemu_boot.log $EXTLOG
#[stdio]
#cmd=/usr/bin/env $TERM HOME=$CTRLDIR QUIET=1 DOSDRIVE_D=$NODEDIR DOSDRIVE_E=$XTRNDIR DOSDRIVE_F=$CTRLDIR DOSDRIVE_G=$DATADIR DOSDRIVE_H=$EXECDIR NODEDIR=$NODEDIR $DOSEMUBIN SHELL_LOADHIGH_DEFAULT=0 -d $NODEDIR -d $XTRNDIR -I"video { none }" -I'keystroke "\n"' $VIRTUALCONF -f$DOSEMUCONF -E$EXTBAT -o$NODEDIRdosemu_boot.log $EXTLOG
-----------------------------------------------------------------
sbbs@wwiv:~/node1$ /usr/bin/env HOME=/sbbs/ctrl/ QUIET=1 DOSDRIVE_D=/sbbs/node1/ DOSDRIVE_E=/sbbs/xtrn/doors DOSDRIVE_F=/sbbs/ctrl/ DOSDRIVE_G=/sbbs/data/ DOSDRIVE_H=/sbbs/exec/ NODEDIR=/sbbs/node1/ /usr/local/bin/dosemu.bin SHELL_LOADHIGH_DEFAULT=0 -d /sbbs/node1/ -d /sbbs/xtrn/doors -I"video { none }" -I"serial { virtual com 1 }" -f/sbbs/ctrl/dosemu.conf -ED:external.bat -o/sbbs/node1/dosemu_boot.log
C: HD1, Pri[ 1], CHS= 0-1-1, start= 0 MB, size= 2000 MB
F: HD2, Pri[ 1], CHS= 0-1-1, start= 0 MB, size= 2000 MB
G: HD3, Pri[ 1], CHS= 0-1-1, start= 0 MB, size= 2000 MB
H: HD4, Pri[ 1], CHS= 0-1-1, start= 0 MB, size= 2000 MB
I: HD5, Pri[ 1], CHS= 0-1-1, start= 0 MB, size= 2000 MB
J: HD6, Pri[ 1], CHS= 0-1-1, start= 0 MB, size= 2000 MB
dosemu XMS 3.0 & UMB support enabled
dosemu EMS driver rev 0.9 installed.
EMUFS host file and print access available
dosemu CDROM driver installed (V0.2)
Process 0 starting: J:\command.com /e:384 /p /k %FDPP_AUTOEXEC%
Sound not enabled in config!
Welcome to dosemu2!
Build 2.0pre9-dev-20230917-1536-g5d314804e
---
þ Synchronet þ The FBO BBS - IPV4/V6 - bbs.thefbo.us or bbs6.thefbo.us
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)