1. Forum
  2. FidoNet
  3. MYSTIC

  • Upgrade to a46

    From Rick Smith@1:340/202 to All on Thu Mar 19 16:45:56 2020
    OK so I got the upgrade to work, imagine reading the directions works almost everytime! (VBG) ok so everything seems to work, however when logging in
    there is an error message right after the "one liners" screen that flashes up very fast so fast that I had to take a video to see it.. everything appears
    to be working but wanted some opinions.

    MPL Version Mismatch: [MPX 112a43] / [MPX 112a46]
    Have looked further still no luck


    Any clues?

    Regards,

    Nitro

    --- Mystic BBS v1.12 A46 2020/03/18 (Windows/64)
    * Origin: Abacus BBS (1:340/202)
  • From mark lewis@1:3634/12 to Rick Smith on Fri Mar 20 10:27:56 2020
    Re: Upgrade to a46
    By: Rick Smith to All on Thu Mar 19 2020 16:45:56


    MPL Version Mismatch: [MPX 112a43] / [MPX 112a46]
    Have looked further still no luck

    did you recompile ALL of your mpl scripts? depending on your installation and if you use themes in different directories, you may need to go into your other theme directories and compile those in there, too...


    )\/(ark
    --- SBBSecho 3.10-Linux
    * Origin: SouthEast Star Mail HUB - SESTAR (1:3634/12)
  • From g00r00@1:129/215 to Rick Smith on Fri Mar 20 11:37:38 2020
    OK so I got the upgrade to work, imagine reading the directions works almost everytime! (VBG) ok so everything seems to work, however when logging in there is an error message right after the "one liners" screen that flashes up very fast so fast that I had to take a video to see it.. everything appears to be working but wanted some opinions.

    MPL Version Mismatch: [MPX 112a43] / [MPX 112a46]

    Should also be in the directions. You need to run mplc -T

    --- Mystic BBS v1.12 A46 2020/03/18 (Windows/64)
    * Origin: Sector 7 (1:129/215)
  • From Rick Smith@1:340/202 to g00r00 on Fri Mar 20 11:12:52 2020
    Should also be in the directions. You need to run mplc -T

    Indeed it was :-) However in the directions it read mplc -all, is that good
    or should I run again with the -T? Also as soon as I get my new machine up which will be later today, can I go from 64 bit to 32 bit without too much trouble?

    Regards,

    Nitro

    --- Mystic BBS v1.12 A46 2020/03/18 (Windows/64)
    * Origin: Abacus BBS (1:340/202)
  • From g00r00@1:129/215 to Rick Smith on Fri Mar 20 16:36:39 2020
    Indeed it was :-) However in the directions it read mplc -all, is that good or should I run again with the -T? Also as soon as I get my new machine up which will be later today, can I go from 64 bit to 32 bit without too much trouble?

    Either should work but -T is probably best.

    You can freely switch between 64-bit and 32-bit with the exception of Python, Cryptlib, and Hunspell if you use those you'll need to have the correct bit-version installed for them to work.

    --- Mystic BBS v1.12 A46 2020/03/18 (Windows/64)
    * Origin: Sector 7 (1:129/215)