1. Forum
  2. FidoNet
  3. MYSTIC

  • Message Group during newscan

    From Alexander Grotewohl@1:120/616 to All on Sun Apr 18 18:57:54 2021
    hello,

    during new message scan, i've noticed that !MB correctly follows the current message base while reading (shows correctly in ansimrd header) but !MG seems to stick to the user's current group regardless. is there a trick to get that to update correctly?

    --- Mystic BBS v1.12 A47 2021/04/08 (Windows/32)
    * Origin: cold fusion - cfbbs.net - grand rapids, mi (1:120/616)
  • From g00r00@1:129/215 to Alexander Grotewohl on Mon Apr 19 12:09:12 2021
    during new message scan, i've noticed that !MB correctly follows the current mes sage base while reading (shows correctly in ansimrd header) but !MG seems to sti ck to the user's current group regardless. is there
    a trick to get that to updat e correctly?

    A group can be anything in Mystic: doors, menus, files, and anything can be a member of many different groups. There isn't one group that a message base belongs to that could be displayed (which is what I think you're looking for).

    The MG code shows the current group so it sounds like its working like it should.

    Are you reading through the ANSI reader/index reader, or standard reader? Maybe I can take a look and see if there is something I can do to make this work they way you want.

    --- Mystic BBS v1.12 A47 2021/04/08 (Windows/64)
    * Origin: Sector 7 | Mystic WHQ (1:129/215)
  • From Alexander Grotewohl@1:120/616 to g00r00 on Mon Apr 19 19:38:59 2021
    On 19 Apr 2021, g00r00 said the following...

    Are you reading through the ANSI reader/index reader, or standard
    reader? Maybe I can take a look and see if there is something I can do
    to make this work they way you want.

    the behavior is the same for both, but during newscan only. (index reader seems to temporarily change the group so MG displays correctly.. standard reader can't read outside the current group at all except for new scans)

    i thought it would work like this:

    General Base -> g2 -> SomeNet -> !MG shows SomeNet while newscan is currently in General Base.

    (i know.. i already see a caveat regarding my multi-grouped Netmail base.. duno how to handle that other than perhaps matching the message's netmail address to a group name or something)

    i've seen other boards include the network name inside the base name.. maybe this is why :) unfortunately that would make the index reader look quite unpleasant i think.

    --- Mystic BBS v1.12 A47 2021/04/08 (Windows/32)
    * Origin: cold fusion - cfbbs.net - grand rapids, mi (1:120/616)
  • From g00r00@1:129/215 to Alexander Grotewohl on Mon Apr 19 19:46:24 2021
    the behavior is the same for both, but during newscan only. (index
    reader seems to temporarily change the group so MG displays correctly.. standard reader can't read outside the current group at all except for new scans)

    I figured that might be the case - the index reader is there to confuse you! ;)

    The index reader doesn't actually use the current user's group, it reads the group data and calculates a list of bases based on that group listing. Its a totally different beast in how its programmed.

    The traditional readers work a little different they just "ignore" the group when scanning all groups as opposed to actually changing the users group. I don't think thats the ideal way to do it, and if I redid it in 2021 instead of 1995 I would have it switch groups. I am guessing Renegade used to "ignore" the group instead of switch and thats why I made Mystic work that way too?

    There are some ways you can probably get it to work how you want.

    If you divide your bases into groups by Network, then you can use the MN code which gives the Network description that is assigned to the message base and that will give you a result similar to what I think you want.

    You could also do it with a small MPL script I think too and maybe I can whip up something for you. Or I may just try to see if I can make it join groups whichever seems easier and less probable to break existing setups. Let me know if the MN mci code would work for you and if not maybe we can come up with something for you.

    --- Mystic BBS v1.12 A47 2021/04/08 (Windows/64)
    * Origin: Sector 7 | Mystic WHQ (1:129/215)
  • From Alexander Grotewohl@1:120/616 to g00r00 on Mon Apr 19 22:11:38 2021
    On 19 Apr 2021, g00r00 said the following...

    If you divide your bases into groups by Network, then you can use the MN code which gives the Network description that is assigned to the message base and that will give you a result similar to what I think you want.

    this works indeed! i had disregarded it because of the wiki description:

    MN - Network address of current message base

    which to me meant 1:2/3. doesn't seem to be publically editable or i'd fix it right quick.

    but, i have to introduce a different issue:

    QWK networked bases show as "Local Address" :)

    --- Mystic BBS v1.12 A47 2021/04/08 (Windows/32)
    * Origin: cold fusion - cfbbs.net - grand rapids, mi (1:120/616)
  • From g00r00@1:129/215 to Alexander Grotewohl on Tue Apr 20 10:40:09 2021
    this works indeed! i had disregarded it because of the wiki description:

    MN - Network address of current message base

    which to me meant 1:2/3. doesn't seem to be publically editable or i'd
    fix it ri ght quick.

    Thanks for pointing that out. I have updated it to read "network description".

    but, i have to introduce a different issue:

    QWK networked bases show as "Local Address" :)

    Putting me to work again!

    I have fixed this and I've just updated the "prealpha" A47 builds that includes this. Please let me know if you encounter any issues with it after you upgrade!

    --- Mystic BBS v1.12 A47 2021/04/08 (Windows/64)
    * Origin: Sector 7 | Mystic WHQ (1:129/215)
  • From Alexander Grotewohl@1:120/616 to g00r00 on Thu Apr 22 03:57:19 2021
    On 20 Apr 2021, g00r00 said the following...

    Putting me to work again!
    I have fixed this and I've just updated the "prealpha" A47 builds that includes
    this. Please let me know if you encounter any issues with it after you upgrade!

    you're too kind.. works a treat. thank you!

    --- Mystic BBS v1.12 A47 2021/04/20 (Windows/32)
    * Origin: cold fusion - cfbbs.net - grand rapids, mi (1:120/616)