Test from IPv6 only test node.
Feel free to attempt to poll me binkp at f5556.vlist.eu
Test from IPv6 only test node.
Feel free to attempt to poll me binkp at f5556.vlist.eu
Routed PING should also work.
* Origin: ZC1 certified techno-dick (2:280/5555)
=== Cut ===
17:55 [841] BEGIN, binkd/1.1a-111/CYGWIN_NT-6.1-7601 -p -P 280/5556 binkd.cfg
17:55 [841] creating a poll for 2:280/5556@fidonet (`d' flavour)
17:55 [841] clientmgr started
17:55 [842] call to 2:280/5556@fidonet
17:55 [842] trying f5556.vlist.eu
[2001:1c02:1103:2a00:f1d0:2:280:5556]...
17:55 [842] connected
17:55 [842] outgoing session with f5556.vlist.eu:24554 [2001:1c02:1103:2a00:f1d0:2:280:5556]
17:55 [842] OPT CRAM-MD5-559386c9e7a12a8ea1c4bcbd6a098bee
17:55 [842] Remote requests MD mode
17:55 [842] SYS Nieuw Schnoord IPv6 test node
17:55 [842] ZYZ Michiel van der Vlist
17:55 [842] LOC Driebergen, NL
17:55 [842] NDL CM,MO,IBN:f5556.vlist.eu,PING,IPv6,INO4
17:55 [842] TIME Sun, 23 Aug 2020 16:55:21 +0200
17:55 [842] VER binkd/1.1a-111/Win32 binkp/1.1
17:55 [842] addr: 2:280/5556@fidonet
17:55 [842] OPT EXTCMD GZ BZ2
17:55 [842] Remote supports EXTCMD mode
17:55 [842] Remote supports GZ mode
17:55 [842] Remote supports BZ2 mode
17:55 [842] done (to 2:280/5556@fidonet, OK, S/R: 0/0 (0/0 bytes))
17:55 [842] session closed, quitting...
17:55 [841] rc(842)=0
=== Cut ===
And from OS/2:
=== Cut ===
18:00 [26563] BEGIN, binkd/1.1a-111/OS2 -p -P 280/5556
binkd_client.cfg
18:00 [26563] creating a poll for 2:280/5556@fidonet (`d' flavour)
18:00 [26563] clientmgr started
18:00 [26564] call to 2:280/5556@fidonet
18:00 [26564] trying f5556.vlist.eu via proxy 192.168.1.15:8118...
18:00 [26564] connected
18:00 [26564] connected to proxy pingviinit.localnet:8118
18:00 [26564] outgoing session with f5556.vlist.eu:24554
18:00 [26564] OPT CRAM-MD5-0c88a74180874d9b1a624b0c5ef132ee
18:00 [26564] Remote requests MD mode
18:00 [26564] SYS Nieuw Schnoord IPv6 test node
18:00 [26564] ZYZ Michiel van der Vlist
18:00 [26564] LOC Driebergen, NL
18:00 [26564] NDL CM,MO,IBN:f5556.vlist.eu,PING,IPv6,INO4
18:00 [26564] TIME Sun, 23 Aug 2020 17:00:29 +0200
18:00 [26564] VER binkd/1.1a-111/Win32 binkp/1.1
18:00 [26564] addr: 2:280/5556@fidonet
18:00 [26564] OPT EXTCMD CRYPT GZ BZ2
18:00 [26564] Remote supports EXTCMD mode
18:00 [26564] Remote requests CRYPT mode
18:00 [26564] Remote supports GZ mode
18:00 [26564] Remote supports BZ2 mode
18:00 [26564] pwd protected session (MD5)
18:00 [26564] session in CRYPT mode
18:00 [26564] done (to 2:280/5556@fidonet, OK, S/R: 0/0 (0/0 bytes))
18:00 [26564] session closed, quitting...
18:00 [26563] rc(26564)=0
18:00 [26563] the queue is empty, quitting...
=== Cut ===
18:00 [26563] BEGIN, binkd/1.1a-111/OS2 -p -P 280/5556
- 16:55 [1360] SYS WAT/64
- 16:55 [1360] ZYZ Tommi Koivula
- 16:55 [1360] LOC wat.rbb.bbs.fi
- 16:55 [1360] NDL IBN,MO
- 16:55 [1360] TIME Sun, 23 Aug 2020 17:55:18 +0300
- 16:55 [1360] VER binkd/1.1a-111/CYGWIN_NT-6.1-7601 binkp/1.1
+ 16:55 [1360] addr: 2:221/1.1@fidonet
Check!
Have you tried to PING 2:280/5556 ? Routed via 28/0 or 280/0 should
work...
Routed PING should also work.
I don't think so, there is no 2:280/5556 in the nodelist.
is known to the host, is shouldRouted PING should also work.
I don't think so, there is no 2:280/5556 in the nodelist.
If everyone has a properly setup default route to the host and the node
work.
So please try it and see what happens...
* Origin: IPv6 only test node (2:280/5556)
done (to 2:280/5556@fidonet, OK, S/R: 0/0 (0/0 bytes)) 23 Aug 17:56:27 [17459] session closed, quitting...
If the node is not listed, the message will be bounced at host 221/0.
* Origin: IPv6 only test node (2:280/5556)
What exactly are you testing now?
If the node is not listed, the message will be bounced at host
221/0.
Ah, you run an netmail tracker that bounce inlisted nodes...
* Origin: IPv6 only test node (2:280/5556)
What exactly are you testing now?
o Running two nodes on one and the same physical hardware.
o Running an IPv6 only node.
o Running a unlisted node. :)
And keeping then isolated from each other...What exactly are you testing now?
o Running two nodes on one and the same physical hardware.
o Running an IPv6 only node.
o Running a unlisted node. :)
Ok. Still no reply to any PING. Some of them were sent crash.
an unsecure session. Should beOk. Still no reply to any PING. Some of them were sent crash.
Got it. I forgot to add something that will deal with mail arriving via
fixed now...
On Sunday August 23 2020 19:38, you wrote to me:
TK>>> What exactly are you testing now?
>> o Running two nodes on one and the same physical hardware.
And keeping then isolated from each other...
>> o Running two nodes on one and the same physical hardware.
And keeping then isolated from each other...
I have been running two totally different fido systems in a same
computer for years. :D
Test from IPv6 only test node.
Sysop: | Keyop |
---|---|
Location: | Huddersfield, West Yorkshire, UK |
Users: | 418 |
Nodes: | 16 (0 / 16) |
Uptime: | 42:41:39 |
Calls: | 8,783 |
Calls today: | 10 |
Files: | 13,296 |
Messages: | 5,964,667 |