Realistic portraits of squishy layer that's key to battery performance


Date:
January 6, 2022
Source:
DOE/SLAC National Accelerator Laboratory
Summary:
Scientists have made realistic close-ups of a plump, squishy
layer called the solid-electrolyte interphase (SEI) that forms on
lithium metal anodes as a result of chemical reactions with the
electrolyte. Knowing what it really looks will give them a new
way to improve next-gen battery design.



FULL STORY ========================================================================== Lithium metal batteries could store much more charge in a given space
than today's lithium-ion batteries, and the race is on to develop them
for next-gen electric vehicles, electronics and other uses.


==========================================================================
But one of the hurdles that stand in the way is a silent battle between
two of the battery's parts. The liquid between the battery electrodes,
known as the electrolyte, corrodes the surface of the lithium metal
anode, coating it in a thin layer of gunk called the solid-electrolyte interphase, or SEI.

Although formation of SEI is believed to be inevitable, researchers hope
to stabilize and control the growth of this layer in a way that maximizes
the battery's performance. But until now they have never had a clear
picture of what the SEI looks like when it's saturated with electrolyte,
as it would be in a working battery.

Now, researchers from the Department of Energy's SLAC National Accelerator Laboratory and Stanford University have made the first high-res images
of this layer in its natural plump, squishy state. This advance was made possible by cryogenic electron microscopy, or cryo-EM, a revolutionary technology that reveals details as small as atoms.

The results, they said, suggest that the right electrolyte can minimize
the swelling and improve the battery's performance -- giving scientists
a potential new way to tweak and improve battery design. They also give researchers a new tool for studying batteries in their everyday working environments.

The team described their work in a paper published in Science today.



========================================================================== "There are no other technologies that can look at this interface between
the electrode and the electrolyte with such high resolution," said
Zewen Zhang, a Stanford PhD student who led the experiments with SLAC
and Stanford professors Yi Cui and Wah Chiu. "We wanted to prove that we
could image the interface at these previously inaccessible scales and see
the pristine, native state of these materials as they are in batteries."
Cui added, "We find this swelling is almost universal. Its effects have
not been widely appreciated by the battery research community before,
but we found that it has a significant impact on battery performance."
A 'thrilling' tool for energy research This is the latest in a series of groundbreaking results over the past five years that show cryo-EM, which
was developed as a tool for biology, opens "thrilling opportunities"
in energy research, the team wrote in a separate review of the field
published in July in Accounts of Chemical Research.

Cryo-EM is a form of electron microscopy, which uses electrons rather
than light to observe the world of the very small. By flash-freezing
their samples into a clear, glassy state, scientists can look at the
cellular machines that carry out life's functions in their natural state
and at atomic resolution.

Recent improvements in cryo-EM have transformed it into a highly sought
method for revealing biological structure in unprecedented detail,
and three scientists were awarded the 2017 Nobel Prize in chemistry for
their pioneering contributions to its development.



========================================================================== Inspired by many success stories in biological cryo-EM, Cui teamed
up with Chiu to explore whether cryo-EM could be as useful a tool for
studying energy- related materials as it was for studying living systems.

One of the first things they looked at was one of those pesky SEI layers
on a battery electrode. They published the first atomic-scale images of
this layer in 2017, along with images of finger-like growths of lithium
wire that can puncture the barrier between the two halves of the battery
and cause short circuits or fires.

But to make those images they had to take the battery parts out of the electrolyte, so that the SEI dried into a shrunken state. What it looked
like in a wet state inside a working battery was anyone's guess.

Blotter paper to the rescue To capture the SEI in its soggy native
environment, the researchers came up with a way to make and freeze very
thin films of the electrolyte liquid that contained tiny lithium metal
wires, which offered a surface for corrosion and the formation of SEI.

First, they inserted a metal grid used for holding cryo-EM samples into
a coin cell battery. When they removed it, thin films of electrolyte
clung to tiny circular holes within the grid, held in place by surface
tension just long enough to perform the remaining steps.

However, those films were still too thick for the electron beam to
penetrate and produce sharp images. So Chiu suggested a fix: sopping up
the excess liquid with blotter paper. The blotted grid was immediately
plunged into liquid nitrogen to freeze the little films into a glassy
state that perfectly preserved the SEI. All this took place in a closed
system that protected the films from exposure to air.

The results were dramatic, Zhang said. In these wet environments, SEIs
absorbed electrolyte and swelled to about twice their previous thickness.

When the team repeated the process with half a dozen other electrolytes
of varying chemical compositions, they found that some produced much
thicker SEI layers than others -- and that the layers that swelled the
most were associated with the worst battery performance.

"Right now that connection between SEI swelling behavior and performance applies to lithium metal anodes," Zhang said, "but we think it should
apply as a general rule to other metallic anodes, as well." The team
also used the super-fine tip of an atomic force microscope (AFM) to
probe the surfaces of SEI layers and verify that they were more squishy
in their wet, swollen state than in their dry state.

In the years since the 2017 paper revealed what cryo-EM can do for energy materials, it's been used to zoom in on materials for solar cells and
cage-like molecules called metal-organic frameworks that can be used in
fuel cells, catalysis and gas storage.

As far as next steps, the researchers say they'd like to find a way to
image these materials in 3D -- and to image them while they're still
inside a working battery, for the most realistic picture yet.

Yi Cui is director of Stanford's Precourt Institute for Energy and an investigator with the Stanford Institute for Materials and Energy Sciences (SIMES) at SLAC. Wah Chiu is co-director of the Stanford-SLAC Cryo-EM Facilities, where the cryo-EM imaging work for this study took place. Part
of this work was performed at the Stanford Nano Shared Facilities (SNSF)
and Stanford Nanofabrication Facility (SNF). The research was funded by
the DOE Office of Science.

========================================================================== Story Source: Materials provided by
DOE/SLAC_National_Accelerator_Laboratory. Original written by Glennda
Chui. Note: Content may be edited for style and length.


========================================================================== Related Multimedia:
* Cryo-EM_snapshots_of_the_solid-electrolyte_interphase ========================================================================== Journal Reference:
1. Zewen Zhang, Yuzhang Li, Rong Xu, Weijiang Zhou, Yanbin Li,
Solomon T.

Oyakhire, Yecun Wu, Jinwei Xu, Hansen Wang, Zhiao Yu, David
T. Boyle, William Huang, Yusheng Ye, Hao Chen, Jiayu Wan, Zhenan
Bao, Wah Chiu, Yi Cui. Capturing the swelling of solid-electrolyte
interphase in lithium metal batteries. Science, 2022; 375 (6576):
66 DOI: 10.1126/ science.abi8703 ==========================================================================

Link to news story: https://www.sciencedaily.com/releases/2022/01/220106143726.htm

--- up 4 weeks, 5 days, 7 hours, 13 minutes
* Origin: -=> Castle Rock BBS <=- Now Husky HPT Powered! (1:317/3)