1. Forum
  2. FidoNet
  3. BINKLEY

  • Tap tap

    From Sean Dennis@1:18/200 to All on Mon Jan 28 17:40:01 2019
    Hello All.

    Is this thing on?

    I'm now using BT/2 to answer the telnet ports and via VMODEM on my BBS.

    Later,
    Sean

    --- GoldED/2 3.0.1
    * Origin: Outpost BBS - bbs.outpostbbs.net (1:18/200)
  • From mark lewis@1:3634/12.73 to Sean Dennis on Mon Jan 28 20:12:00 2019

    On 2019 Jan 28 17:40:00, you wrote to All:

    @MSGID: 1:18/200 5c4f3e8e
    @CHRS: IBMPC 2
    Hello All.

    Is this thing on?

    I'm now using BT/2 to answer the telnet ports and via VMODEM on my BBS.

    Later,
    Sean

    --- GoldED/2 3.0.1
    * Origin: Outpost BBS - bbs.outpostbbs.net (1:18/200)
    SEEN-BY: 15/0 18/200 19/36 20/4609 34/999 90/1 104/57 116/18 123/140 153/7715
    SEEN-BY: 218/700 220/60 222/2 230/150 152 240/1120 250/1 261/38 100
    266/404
    SEEN-BY: 266/512 267/155 275/100 282/1031 1056 291/1 111 320/119 219 340/400
    SEEN-BY: 342/13 396/45 712/848 801/161 189 2320/105 3634/12 5020/1042 116/116
    SEEN-BY: 123/25 150 755 135/300 3634/15 27 50 119 123/50 3634/0 18/0
    123/0
    SEEN-BY: 1/120
    @PATH: 18/200 261/38 3634/12



    )\/(ark

    Always Mount a Scratch Monkey
    Do you manage your own servers? If you are not running an IDS/IPS yer doin' it wrong...
    ... Yea verily, thou art Chaotic Evil and I must slay thee.
    ---
    * Origin: (1:3634/12.73)
  • From Paul Quinn@3:640/1384 to Sean Dennis on Tue Jan 29 11:57:56 2019
    Hi! Sean,

    On 28 Jan 19 20:12, mark lewis wrote to you:

    Is this thing on?

    I'm now using BT/2 to answer the telnet ports and via VMODEM on
    my BBS.

    @PATH: 18/200 261/38 3634/12

    If mark gets 'em, then so do I.

    I still have a BT/Win32 ready to rumble in an unused vBox 'appliance'. If I was motivated enough I could get it re-aligned to monitor and poke at my Linux binkD, but as I don't run any Fidonet Win32 stuff any more... that won't get done, probably. ;)

    Cheers,
    Paul.

    ... There is a 'half' even if it is only 49%, d#ckh##d. R\%/itt
    --- GoldED+/LNX 1.1.5-b20130515
    * Origin: Quinn's Rock - Live from Paul's Xubuntu desktop! (3:640/1384)
  • From Sean Dennis@1:18/200 to mark lewis on Tue Jan 29 11:33:20 2019
    Hello mark.

    28 Jan 19 20:12, you wrote to me:

    On 2019 Jan 28 17:40:00, you wrote to All:

    @MSGID: 1:18/200 5c4f3e8e

    Thank you sir. :)

    Later,
    Sean

    --- GoldED/2 3.0.1
    * Origin: Outpost BBS - bbs.outpostbbs.net (1:18/200)
  • From Sean Dennis@1:18/200 to Paul Quinn on Tue Jan 29 11:33:37 2019
    Hello Paul.

    29 Jan 19 11:57, you wrote to me:

    If mark gets 'em, then so do I.

    That's a good thing. I'm taking over the MUFFIN and TUB echoes for Mark since I'm using Max/2 and Squish/2 again.

    BT/2 is now answering all my BBS' telnet ports.

    If I was motivated enough I could get it re-aligned to monitor and
    poke at my Linux binkD, but as I don't run any Fidonet Win32 stuff any more... that won't get done, probably. ;)

    Sometimes just because you can do something doesn't mean you should. :D

    Later,
    Sean

    --- GoldED/2 3.0.1
    * Origin: Outpost BBS - bbs.outpostbbs.net (1:18/200)
  • From Dumas Walker@1:2320/105 to SEAN DENNIS on Tue Jan 29 19:45:00 2019
    Hello All.
    Is this thing on?
    I'm now using BT/2 to answer the telnet ports and via VMODEM on my BBS.

    Yes. :)

    ---
    * SLMR 2.1a * Wind in my hair - shifting and drifting...
    * Origin: capitolcityonline.net * Telnet/SSH:2022/HTTP (1:2320/105)
  • From Torsten Bamberg@2:240/5832 to Sean Dennis on Wed Jan 30 23:38:02 2019
    Hallo Sean!

    29.01.2019 11:33, Sean Dennis schrieb an Paul Quinn:

    That's a good thing. I'm taking over the MUFFIN and TUB echoes for
    Mark since I'm using Max/2 and Squish/2 again.
    BT/2 is now answering all my BBS' telnet ports.
    Do you use the SIO from ray gwinn or other software?

    Later,
    Sean
    Bye/2 Torsten

    ... MAILBOX01 on OS2: up 1d 23h 20m load: 34 proc, 128 threads (tbupv1.1)
    --- GoldED+ 1.1.5-18
    * Origin: DatenBahn BBS Hamburg (2:240/5832)
  • From Sean Dennis@1:18/200 to Torsten Bamberg on Thu Jan 31 20:05:10 2019
    Torsten Bamberg wrote to Sean Dennis <=-

    Do you use the SIO from ray gwinn or other software?

    I use SIO 1.60d under ArcaOS 5.0.

    Later,
    Sean
    ___ MultiMail/Win v0.51

    --- Maximus/2 3.01
    * Origin: Outpost BBS - bbs.outpostbbs.net (1:18/200)
  • From Tommi Koivula@2:221/360 to Sean Dennis on Fri Feb 1 11:27:27 2019

    Thursday January 31 2019 20:05, Sean Dennis wrote to Torsten Bamberg:

    Torsten Bamberg wrote to Sean Dennis <=-

    Do you use the SIO from ray gwinn or other software?

    I use SIO 1.60d

    So do I.. Are there any other than SIO and SIO2K?

    BTW, Wake Up! ;)

    === Begin XENIA4.LOG ===
    + 01 Feb 11:21:19 XEN Mailing Outpost BBS (1:18/200)
    + 01 Feb 11:21:19 XEN Assuming ID 2:221/360@fidonet
    + 01 Feb 11:21:19 XEN Dialling bbs.outpostbbs.net (cm,tel)
    + 01 Feb 11:21:21 XEN Connected at 57600 bps /ARQ/TEL TO 76.5.143.210
    - 01 Feb 11:21:51 XEN Still sleeping
    + 01 Feb 11:21:53 XEN Mail failed 0:33 min.
    + 01 Feb 11:21:55 XEN Mailing Outpost BBS (1:18/200)
    + 01 Feb 11:21:55 XEN Assuming ID 2:221/360@fidonet
    + 01 Feb 11:21:55 XEN Dialling bbs.outpostbbs.net (cm,t60177,tel)
    + 01 Feb 11:21:57 XEN Connected at 57600 bps /ARQ/TEL TO 76.5.143.210
    - 01 Feb 11:22:28 XEN Still sleeping
    + 01 Feb 11:22:30 XEN Mail failed 0:34 min.
    * 01 Feb 11:22:32 XEN No more calls to make (Exit Dynamic)
    * 01 Feb 11:22:32 XEN Xenia Mailer 1.98.06+ OS/2 : end (0)
    === End XENIA4.LOG ===

    'Tommi

    --- GoldED+/EMX 1.1.5-b20180707
    * Origin: ---------------------------------->> (2:221/360)
  • From Torsten Bamberg@2:240/5832 to Tommi Koivula on Fri Feb 1 18:01:41 2019
    Hallo Tommi!

    01.02.2019 11:27, Tommi Koivula schrieb an Sean Dennis:

    Do you use the SIO from ray gwinn or other software?
    I use SIO 1.60d
    So do I.. Are there any other than SIO and SIO2K?
    Well, there are only two othe ways to get telnet working:
    - use the telnetdaemon, witch comes with EcS/Arca
    - netcat (but the spawn to your bbs will fail)

    'Tommi
    Bye/2 Torsten

    ... MAILBOX01 on OS2: up 0d 16h 33m load: 34 proc, 126 threads (tbupv1.1)
    --- GoldED+ 1.1.5-18
    * Origin: DatenBahn BBS Hamburg (2:240/5832)
  • From Tommi Koivula@2:221/360 to Torsten Bamberg on Fri Feb 1 21:03:43 2019

     TB>>> Do you use the SIO from ray gwinn or other software?
     SD>> I use SIO 1.60d
     TK> So do I.. Are there any other than SIO and SIO2K?
    Well, there are only two othe ways to get telnet working:
    - use the telnetdaemon, witch comes with EcS/Arca

    This is what I use as a remote shell from LAN. Wseb has it too.

    - netcat (but the spawn to your bbs will fail)

    So it is useless. :)

    You have ITN flag in the nodelist, but no connect. :(

    'Tommi

    --- Mozilla/5.0 (Windows NT 6.1; Win64; x64; rv:60.0) Gecko/20100101 Thunderbir
    * Origin: rbb.fidonet.fi (2:221/360)
  • From Torsten Bamberg@2:240/5832 to Tommi Koivula on Fri Feb 1 22:55:44 2019
    Hallo Tommi!

    01.02.2019 21:03, Tommi Koivula schrieb an Torsten Bamberg:

    Well, there are only two othe ways to get telnet working:
    - use the telnetdaemon, witch comes with EcS/Arca
    This is what I use as a remote shell from LAN. Wseb has it too.
    I#ve played around with telnetd, but I never got it working properly. Telnetd should open a bbs-task automaticly after a connection, but it doesn't work.

    - netcat (but the spawn to your bbs will fail)
    So it is useless. :)
    Jep. emx-posix lib is not fully portet to work with os/2. I've asked netlabs and bit wise gmbh, if they plan to port gnu-posix to os/2, but they won't do any further things on emx-posix. :-(

    You have ITN flag in the nodelist, but no connect. :(
    Currently under construction. qico does not work properly with freebsd12 and ipv6

    'Tommi
    Bye/2 Torsten

    ... MAILBOX01 on OS2: up 0d 21h 27m load: 34 proc, 127 threads (tbupv1.1)
    --- GoldED+ 1.1.5-18
    * Origin: DatenBahn BBS Hamburg (2:240/5832)
  • From Sean Dennis@1:18/200 to Tommi Koivula on Sun Feb 3 18:05:23 2019
    Hello Tommi.

    01 Feb 19 11:27, you wrote to me:

    So do I.. Are there any other than SIO and SIO2K?

    Not that I know of.

    BTW, Wake Up! ;)

    + 01 Feb 11:21:21 XEN Connected at 57600 bps /ARQ/TEL TO 76.5.143.210
    - 01 Feb 11:21:51 XEN Still sleeping
    + 01 Feb 11:21:53 XEN Mail failed 0:33 min.

    The BBS had locked up due to a utility failing during my nightly maintenance event at 0200 Eastern.

    Later,
    Sean

    --- GoldED/2 3.0.1
    * Origin: Outpost BBS - bbs.outpostbbs.net (1:18/200)