1. Forum
  2. FidoNet
  3. BBS CARNIVAL

  • Terminate and Error 200

    From Flavio Bessa@4:801/189.1 to All on Sun Aug 23 18:39:57 2020
    Hello everybody.

    I was playing around with a FreeDOS VM, and downloaded Terminate 5.00 to use on it.

    When I try to run INSTALL.EXE, I get the classic Error 200 from Pascal.

    Tried to use the TPPatch.exe and nothing... Should I decompress the .EXE file, patch it and compress it again?

    Flavio

    ... "Nao, nao e' so moreia. Piranha tambem tem dente." - Cris
    --- MacFidoIP 1.0 (OSX)
    * Origin: Hyperion's Orbit - Resisting since 1995! (4:801/189.1)
  • From Matt Munson@1:218/109 to Flavio Bessa on Sun Aug 23 15:48:27 2020
    RE: Re: Terminate and Error 200
    BY: Flavio Bessa(4:801/189.1)


    Tried to use the TPPatch.exe and nothing... Should I decompress the .EXE file, patch it and compress it again?
    Decompressing would help usually.


    --- WWIV 5.5.0.3230
    * Origin: Inland Utopia BBS * iutopia.duckdns.org:23 (1:218/109)
  • From Dan Clough@1:123/115 to Flavio Bessa on Sun Aug 23 20:41:00 2020
    Flavio Bessa wrote to All <=-

    I was playing around with a FreeDOS VM, and downloaded Terminate
    5.00 to use on it.

    When I try to run INSTALL.EXE, I get the classic Error 200 from
    Pascal.

    Tried to use the TPPatch.exe and nothing... Should I decompress
    the .EXE file, patch it and compress it again?

    I've always used something called PATCHCRT.EXE ...

    It is available here:

    https://www.pcmicro.com/elebbs/faq/rte200.html


    ... Daddy, what does "now formatting drive C:" mean?
    === MultiMail/Linux v0.52
    --- SBBSecho 3.11-Linux
    * Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (1:123/115)
  • From Robert Wolfe@1:261/20 to Flavio Bessa on Sun Aug 23 21:03:00 2020
    I was playing around with a FreeDOS VM, and downloaded Terminate 5.00 to use >on it.

    When I try to run INSTALL.EXE, I get the classic Error 200 from Pascal.

    Tried to use the TPPatch.exe and nothing... Should I decompress the .EXE fil

    patch it and compress it again?


    Uncompress, get and use PATCHCRT and leave it as it is. No need to
    recompress.

    --- ViaMAIL!/SL v2.00
    * Origin: ViaMAIL! - Fully Integrated Front End Mailer (1:261/20)
  • From mark lewis@1:3634/12 to Flavio Bessa on Mon Aug 24 12:37:07 2020
    Re: Terminate and Error 200
    By: Flavio Bessa to All on Sun Aug 23 2020 18:39:57


    Tried to use the TPPatch.exe and nothing... Should I decompress the .EXE
    file, patch it and compress it again?

    if the binary is compressed, of course you have to uncompress it first ;)

    recompressing it is up to you for the most part... just be aware that some software has built-in tamper-detection code so no matter what you do, you may be screwed... only solution in many of those cases is to run a TSR like
    moslow or similar which makes the CPU slower in that instance so the timing calibration won't all take place within the same second leading to x-x=0 where 0 is used for the divide operation...


    )\/(ark
    --- SBBSecho 3.11-Linux
    * Origin: SouthEast Star Mail HUB - SESTAR (1:3634/12)