Hi All!inte
I bought some amateur radio measurement tools, and thought you might be
A NanoVNA v2the
A really, really cool Vector Network Analyzer from 50 kHz to 3 GHz. (attention there is a v1 that can reach only 900 MHz and is slightly worse) It has 2 SMA jacks. 1 for output and measurement of reflected power, and
So you connect an antenna to port 0 and measure SWR for example.I got one myself, cool bit of kit. But I got it from Aliexpress, even though the manufacturer says not to get one there. Didn't notice any problems with it yet.
Or you connect a filter between the 2 ports and measure its characteristic.
A NanoVNA v2I got one myself, cool bit of kit. But I got it from Aliexpress, even though the manufacturer says not to get one there. Didn't notice any problems with it yet.
I have noticed 2 details. Some come without battery or without RFshielding.
Mine has both, so I was lucky ;)Truly lucky. Mine comes in a metal case, which looks to be welded together. Part of the reason I chose to go the Aliexpress route.
I have noticed 2 details. Some come without battery or without RFTruly lucky. Mine comes in a metal case, which looks to be welded together. Part of the reason I chose to go the Aliexpress route.
shielding. Mine has both, so I was lucky ;)
Sounds better than mine :)Definitely more durable. But my 50ohm load started malfunctioning recently, so gotta buy a new one. Don't know if I should go for cheaper or more expensive calibration kits though.
Sysop: | Keyop |
---|---|
Location: | Huddersfield, West Yorkshire, UK |
Users: | 410 |
Nodes: | 16 (2 / 14) |
Uptime: | 81:05:45 |
Calls: | 8,579 |
Calls today: | 3 |
Files: | 13,225 |
Messages: | 5,932,299 |