Ok, as per suggestion in sysops_amy I'm forwarding this to mail_amy... :-)
------------------ Beginning of the forwarded Message ------------------
Hi!
Does anyone have a working setup for Trapdoor using telser.device?
Basically I got it working to that point that I can open Telser GUI and
connect to qico running on Linux and sending EMSI information to Trapdoor,
but when trying to start Trapdoor in answer mode it complains about being unable to initialize the modem and then quitting.
This is when I click on "Connect" in Telser GUI:
~ 2-Apr-19 00:02:42 Initializing modem
+ 2-Apr-19 00:02:42 Waiting for call
+ 2-Apr-19 00:03:07 Calling AX
+ 2-Apr-19 00:03:07 Phone AX, cost 0.00
~ 2-Apr-19 00:03:07 Dialing modem
~ 2-Apr-19 00:03:12 **EMSI_REQA77E
~ 2-Apr-19 00:03:12 + Address 2:2452/413@fidonet using qico v0.59
[2013-02-23 10:16
~ 2-Apr-19 00:03:17 **EMSI_REQA77E
~ 2-Apr-19 00:03:18 + Address 2:2452/413@fidonet using qico v0.59
[2013-02-23 10:16
~ 2-Apr-19 00:03:22 **EMSI_REQA77E
~ 2-Apr-19 00:03:23 + Address 2:2452/413@fidonet using qico v0.59
[2013-02-23 10:16
~ 2-Apr-19 00:03:27 **EMSI_REQA77E
~ 2-Apr-19 00:03:27 + Address 2:2452/413@fidonet using qico v0.59
[2013-02-23 10:16
~ 2-Apr-19 00:03:32 **EMSI_REQA77E
~ 2-Apr-19 00:03:32 + Address 2:2452/413@fidonet using qico v0.59
[2013-02-23 10:16
~ 2-Apr-19 00:03:37 **EMSI_REQA77E
~ 2-Apr-19 00:03:38 + Address 2:2452/413@fidonet using qico v0.59
[2013-02-23 10:16
~ 2-Apr-19 00:03:42 **EMSI_REQA77E
~ 2-Apr-19 00:03:42 + Address 2:2452/413@fidonet using qico v0.59
[2013-02-23 10:16
~ 2-Apr-19 00:03:47 **EMSI_REQA77E
~ 2-Apr-19 00:03:47 + Address 2:2452/413@fidonet using qico v0.59
[2013-02-23 10:16
~ 2-Apr-19 00:03:52 **EMSI_REQA77E
~ 2-Apr-19 00:03:53 + Address 2:2452/413@fidonet using qico v0.59
[2013-02-23 10:16
~ 2-Apr-19 00:03:57 **EMSI_REQA77E
~ 2-Apr-19 00:03:58 + Address 2:2452/413@fidonet using qico v0.59
[2013-02-23 10:16
~ 2-Apr-19 00:04:02 **EMSI_REQA77E
~ 2-Apr-19 00:04:02 + Address 2:2452/413@fidonet using qico v0.59
[2013-02-23 10:16
~ 2-Apr-19 00:04:07 NO CARRIER
- 2-Apr-19 00:04:07 No connection
~ 2-Apr-19 00:04:08 Hanging up modem
~ 2-Apr-19 00:04:08 Already hung up
= 2-Apr-19 00:04:08 Call failed
...and this is when I call via traptell "call AX":
+ 2-Apr-19 00:04:08 Waiting for call
+ 2-Apr-19 00:05:01 Mathias' TrapDoor 1.85 closed
+ 2-Apr-19 00:05:11 Mathias' TrapDoor 1.85 opened
- 2-Apr-19 00:05:21 Carrier lost
+ 2-Apr-19 00:05:21 Mathias' TrapDoor 1.85 closed
+ 2-Apr-19 00:05:30 Mathias' TrapDoor 1.85 opened
- 2-Apr-19 00:05:40 Carrier lost
+ 2-Apr-19 00:05:40 Mathias' TrapDoor 1.85 closed
+ 2-Apr-19 00:06:46 Mathias' TrapDoor 1.85 opened
- 2-Apr-19 00:06:56 Carrier lost
+ 2-Apr-19 00:06:56 Mathias' TrapDoor 1.85 closed
+ 2-Apr-19 18:16:11 Mathias' TrapDoor 1.85 opened
- 2-Apr-19 18:16:23 Carrier lost
+ 2-Apr-19 18:16:23 Mathias' TrapDoor 1.85 closed
In AmiTCP:db/telserv.conf:
0 "ftn.amigaxess.de" "Nothing" HIDE NOLINGER NODEBUG "T:telser.log" NOREDIRECT DOSHANDLER
AmiTCP:db/telserv.hosts:
"AX" "ftn.amigaxess.de" 60177 "DUMB" 11101111100 N "" ""
The other telser config files are untouched.
Trapdoor.cfg has this:
MODEMINIT "ATZ|"
MODEMHANGUP "~~~+++~~~ATH|"
MODEMDIALPRE "ATD"
MODEMDIALPOST "|"
MODEMANSWER "ATA|"
ARQSTRING "ARQ"
SNIFFARQ
SERIALNAME "telser.device"
SERIALUNIT 0
SERIALFLAGS 0
NOSHARED ; for testing
NODSR ; for testing
So, if you spot an error in my config, please tell! ;-)
-------------------- End of the forwarded Message --------------------
--
Ciao... // email:
ij@spice.cologne.de
Ingo \X/ mobil: 0172 - 274 1 275
--- Mail Manager 1.22x/n #1233
* Origin: AmigaXess - home of net.persons of Amiga.ger (39:170/400.1)