Yaesu FTM-300 - return to normal display after pressing DX key to show
From
Andrew Marshall@21:1/5 to
All on Thu Aug 4 15:42:35 2022
I've recently bought a Yaesu FTM-300 for in-shack use, and an FT5D
handheld, now that there's a nearby C4FM repeater (GB7HA) within good
range of my location.
On the FT5D handheld, after long-pressing the DX key to request a list
of the rooms currently connected to the repeater, a press of the BACK
key restores the normal screen display.
On the FTM-300, there is apparently no way to restore the standard
screen display except by turning the rig off, then on again. Despite a
diligent online search, and a careful reading of the printed and online manuals, I have found no key sequence which restores the normal display.
Can anyone help, please?
--
73,
Andrew, G8BUR, M0MAA.
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)