Can anybody check how you step in 1 Mc/s steps rather than ham bands on
your FT857D....not just what it says in the manual which I think must be wrong ....
On 30/09/2021 14:29, Jim GM4DHJ ... wrote:mine doesn't work...going to reset again....
Can anybody check how you step in 1 Mc/s steps rather than ham bands
on your FT857D....not just what it says in the manual which I think
must be wrong ....
If it is the same as the 897, which is basically the same radio in a different case, then you push the select knob and then use it to tune in
1 MHz steps.
Jeff
On 30/09/2021 17:00, Jeff wrote:
On 30/09/2021 14:29, Jim GM4DHJ ... wrote:mine doesn't work...going to reset again....
Can anybody check how you step in 1 Mc/s steps rather than ham bands
on your FT857D....not just what it says in the manual which I think
must be wrong ....
If it is the same as the 897, which is basically the same radio in a
different case, then you push the select knob and then use it to tune
in 1 MHz steps.
Jeff
On 30/09/2021 17:27, Jim GM4DHJ ... wrote:panic over the knob was jammed in and when pulled out all is working
On 30/09/2021 17:00, Jeff wrote:
On 30/09/2021 14:29, Jim GM4DHJ ... wrote:mine doesn't work...going to reset again....
Can anybody check how you step in 1 Mc/s steps rather than ham bands
on your FT857D....not just what it says in the manual which I think
must be wrong ....
If it is the same as the 897, which is basically the same radio in a
different case, then you push the select knob and then use it to tune
in 1 MHz steps.
Jeff
nah no good the push in function of the select knob doesn't
work....shows up in the menu though as setable for various
functions.....oh well
On 30/09/2021 18:18, Jim GM4DHJ ... wrote:
On 30/09/2021 17:27, Jim GM4DHJ ... wrote:panic over the knob was jammed in and when pulled out all is working
On 30/09/2021 17:00, Jeff wrote:
On 30/09/2021 14:29, Jim GM4DHJ ... wrote:mine doesn't work...going to reset again....
Can anybody check how you step in 1 Mc/s steps rather than ham
bands on your FT857D....not just what it says in the manual which I
think must be wrong ....
If it is the same as the 897, which is basically the same radio in a
different case, then you push the select knob and then use it to
tune in 1 MHz steps.
Jeff
nah no good the push in function of the select knob doesn't
work....shows up in the menu though as setable for various
functions.....oh well
fine....
On 30/09/2021 18:53, Jim GM4DHJ ... wrote:
On 30/09/2021 18:18, Jim GM4DHJ ... wrote:
On 30/09/2021 17:27, Jim GM4DHJ ... wrote:panic over the knob was jammed in and when pulled out all is working
On 30/09/2021 17:00, Jeff wrote:
On 30/09/2021 14:29, Jim GM4DHJ ... wrote:mine doesn't work...going to reset again....
Can anybody check how you step in 1 Mc/s steps rather than ham
bands on your FT857D....not just what it says in the manual which
I think must be wrong ....
If it is the same as the 897, which is basically the same radio in
a different case, then you push the select knob and then use it to
tune in 1 MHz steps.
Jeff
nah no good the push in function of the select knob doesn't
work....shows up in the menu though as setable for various
functions.....oh well
fine....
Is it a Yaesu or a Yeasu? The latter comes with 11 meters as standard.
On 06/10/2021 12:04, A. non Eyemouse wrote:and it is not a patch
On 30/09/2021 18:53, Jim GM4DHJ ... wrote:no it doesn't
On 30/09/2021 18:18, Jim GM4DHJ ... wrote:
On 30/09/2021 17:27, Jim GM4DHJ ... wrote:panic over the knob was jammed in and when pulled out all is working
On 30/09/2021 17:00, Jeff wrote:
On 30/09/2021 14:29, Jim GM4DHJ ... wrote:mine doesn't work...going to reset again....
Can anybody check how you step in 1 Mc/s steps rather than ham
bands on your FT857D....not just what it says in the manual which >>>>>>> I think must be wrong ....
If it is the same as the 897, which is basically the same radio in >>>>>> a different case, then you push the select knob and then use it to >>>>>> tune in 1 MHz steps.
Jeff
nah no good the push in function of the select knob doesn't
work....shows up in the menu though as setable for various
functions.....oh well
fine....
Is it a Yaesu or a Yeasu? The latter comes with 11 meters as standard.
On 06/10/2021 12:23, Jim GM4DHJ ... wrote:
On 06/10/2021 12:04, A. non Eyemouse wrote:and it is not a patch
On 30/09/2021 18:53, Jim GM4DHJ ... wrote:no it doesn't
On 30/09/2021 18:18, Jim GM4DHJ ... wrote:
On 30/09/2021 17:27, Jim GM4DHJ ... wrote:panic over the knob was jammed in and when pulled out all is working
On 30/09/2021 17:00, Jeff wrote:
On 30/09/2021 14:29, Jim GM4DHJ ... wrote:mine doesn't work...going to reset again....
Can anybody check how you step in 1 Mc/s steps rather than ham >>>>>>>> bands on your FT857D....not just what it says in the manual
which I think must be wrong ....
If it is the same as the 897, which is basically the same radio
in a different case, then you push the select knob and then use
it to tune in 1 MHz steps.
Jeff
nah no good the push in function of the select knob doesn't
work....shows up in the menu though as setable for various
functions.....oh well
fine....
Is it a Yaesu or a Yeasu? The latter comes with 11 meters as standard.
n my TS50 for mobile mobile...
On 06/10/2021 17:28, Jim GM4DHJ ... wrote:
On 06/10/2021 12:23, Jim GM4DHJ ... wrote:
On 06/10/2021 12:04, A. non Eyemouse wrote:and it is not a patch
On 30/09/2021 18:53, Jim GM4DHJ ... wrote:no it doesn't
On 30/09/2021 18:18, Jim GM4DHJ ... wrote:
On 30/09/2021 17:27, Jim GM4DHJ ... wrote:panic over the knob was jammed in and when pulled out all is
On 30/09/2021 17:00, Jeff wrote:
On 30/09/2021 14:29, Jim GM4DHJ ... wrote:mine doesn't work...going to reset again....
Can anybody check how you step in 1 Mc/s steps rather than ham >>>>>>>>> bands on your FT857D....not just what it says in the manual
which I think must be wrong ....
If it is the same as the 897, which is basically the same radio >>>>>>>> in a different case, then you push the select knob and then use >>>>>>>> it to tune in 1 MHz steps.
Jeff
nah no good the push in function of the select knob doesn't
work....shows up in the menu though as setable for various
functions.....oh well
working fine....
Is it a Yaesu or a Yeasu? The latter comes with 11 meters as standard. >>>>
n my TS50 for mobile mobile...
Doesn't surprise me. Shitty 455kHz ceramic filters versus 10.something
MHz crystal ones. Apart from the 817 I avoided those like the plague. I
did have a 480SAT for a while, that was nice but I ended up getting rid
of it because nobody had the CW or CWN filters at the time. I'd have
another one.
On 07/10/2021 08:59, Jim.GM4DHJ ... wrote:
On 06/10/2021 21:40, A. non Eyemouse wrote:
On 06/10/2021 17:28, Jim GM4DHJ ... wrote:I just sold both my TS2000 rigs...someting strange about them but nice
On 06/10/2021 12:23, Jim GM4DHJ ... wrote:
On 06/10/2021 12:04, A. non Eyemouse wrote:and it is not a patch
On 30/09/2021 18:53, Jim GM4DHJ ... wrote:no it doesn't
On 30/09/2021 18:18, Jim GM4DHJ ... wrote:
On 30/09/2021 17:27, Jim GM4DHJ ... wrote:panic over the knob was jammed in and when pulled out all is
On 30/09/2021 17:00, Jeff wrote:
On 30/09/2021 14:29, Jim GM4DHJ ... wrote:mine doesn't work...going to reset again....
Can anybody check how you step in 1 Mc/s steps rather than >>>>>>>>>>> ham bands on your FT857D....not just what it says in the >>>>>>>>>>> manual which I think must be wrong ....
If it is the same as the 897, which is basically the same
radio in a different case, then you push the select knob and >>>>>>>>>> then use it to tune in 1 MHz steps.
Jeff
nah no good the push in function of the select knob doesn't
work....shows up in the menu though as setable for various
functions.....oh well
working fine....
Is it a Yaesu or a Yeasu? The latter comes with 11 meters as
standard.
n my TS50 for mobile mobile...
Doesn't surprise me. Shitty 455kHz ceramic filters versus
10.something MHz crystal ones. Apart from the 817 I avoided those
like the plague. I did have a 480SAT for a while, that was nice but I
ended up getting rid of it because nobody had the CW or CWN filters
at the time. I'd have another one.
at the same time...miss them a bit
They're DIGITAL Jim. Black magic DSP stuff. But you can remote them
using a TM-D700 front panel apparently.
On 06/10/2021 21:40, A. non Eyemouse wrote:
On 06/10/2021 17:28, Jim GM4DHJ ... wrote:I just sold both my TS2000 rigs...someting strange about them but nice
On 06/10/2021 12:23, Jim GM4DHJ ... wrote:
On 06/10/2021 12:04, A. non Eyemouse wrote:and it is not a patch
On 30/09/2021 18:53, Jim GM4DHJ ... wrote:no it doesn't
On 30/09/2021 18:18, Jim GM4DHJ ... wrote:
On 30/09/2021 17:27, Jim GM4DHJ ... wrote:panic over the knob was jammed in and when pulled out all is
On 30/09/2021 17:00, Jeff wrote:
On 30/09/2021 14:29, Jim GM4DHJ ... wrote:mine doesn't work...going to reset again....
Can anybody check how you step in 1 Mc/s steps rather than ham >>>>>>>>>> bands on your FT857D....not just what it says in the manual >>>>>>>>>> which I think must be wrong ....
If it is the same as the 897, which is basically the same radio >>>>>>>>> in a different case, then you push the select knob and then use >>>>>>>>> it to tune in 1 MHz steps.
Jeff
nah no good the push in function of the select knob doesn't
work....shows up in the menu though as setable for various
functions.....oh well
working fine....
Is it a Yaesu or a Yeasu? The latter comes with 11 meters as standard. >>>>>
n my TS50 for mobile mobile...
Doesn't surprise me. Shitty 455kHz ceramic filters versus 10.something
MHz crystal ones. Apart from the 817 I avoided those like the plague.
I did have a 480SAT for a while, that was nice but I ended up getting
rid of it because nobody had the CW or CWN filters at the time. I'd
have another one.
at the same time...miss them a bit
On 07/10/2021 09:17, A. non Eyemouse wrote:
On 07/10/2021 08:59, Jim.GM4DHJ ... wrote:like the dx con mander.....all that equipment and still begs for £15000
On 06/10/2021 21:40, A. non Eyemouse wrote:
On 06/10/2021 17:28, Jim GM4DHJ ... wrote:I just sold both my TS2000 rigs...someting strange about them but
On 06/10/2021 12:23, Jim GM4DHJ ... wrote:
On 06/10/2021 12:04, A. non Eyemouse wrote:and it is not a patch
On 30/09/2021 18:53, Jim GM4DHJ ... wrote:no it doesn't
On 30/09/2021 18:18, Jim GM4DHJ ... wrote:
On 30/09/2021 17:27, Jim GM4DHJ ... wrote:panic over the knob was jammed in and when pulled out all is
On 30/09/2021 17:00, Jeff wrote:
On 30/09/2021 14:29, Jim GM4DHJ ... wrote:mine doesn't work...going to reset again....
Can anybody check how you step in 1 Mc/s steps rather than >>>>>>>>>>>> ham bands on your FT857D....not just what it says in the >>>>>>>>>>>> manual which I think must be wrong ....
If it is the same as the 897, which is basically the same >>>>>>>>>>> radio in a different case, then you push the select knob and >>>>>>>>>>> then use it to tune in 1 MHz steps.
Jeff
nah no good the push in function of the select knob doesn't
work....shows up in the menu though as setable for various
functions.....oh well
working fine....
Is it a Yaesu or a Yeasu? The latter comes with 11 meters as
standard.
n my TS50 for mobile mobile...
Doesn't surprise me. Shitty 455kHz ceramic filters versus
10.something MHz crystal ones. Apart from the 817 I avoided those
like the plague. I did have a 480SAT for a while, that was nice but
I ended up getting rid of it because nobody had the CW or CWN
filters at the time. I'd have another one.
nice at the same time...miss them a bit
They're DIGITAL Jim. Black magic DSP stuff. But you can remote them
using a TM-D700 front panel apparently.
On 07/10/2021 09:33, Jim.GM4DHJ ... wrote:
On 07/10/2021 09:17, A. non Eyemouse wrote:
On 07/10/2021 08:59, Jim.GM4DHJ ... wrote:like the dx con mander.....all that equipment and still begs for £15000
On 06/10/2021 21:40, A. non Eyemouse wrote:
On 06/10/2021 17:28, Jim GM4DHJ ... wrote:I just sold both my TS2000 rigs...someting strange about them but
On 06/10/2021 12:23, Jim GM4DHJ ... wrote:
On 06/10/2021 12:04, A. non Eyemouse wrote:and it is not a patch
On 30/09/2021 18:53, Jim GM4DHJ ... wrote:no it doesn't
On 30/09/2021 18:18, Jim GM4DHJ ... wrote:
On 30/09/2021 17:27, Jim GM4DHJ ... wrote:panic over the knob was jammed in and when pulled out all is >>>>>>>>> working fine....
On 30/09/2021 17:00, Jeff wrote:
On 30/09/2021 14:29, Jim GM4DHJ ... wrote:mine doesn't work...going to reset again....
Can anybody check how you step in 1 Mc/s steps rather than >>>>>>>>>>>>> ham bands on your FT857D....not just what it says in the >>>>>>>>>>>>> manual which I think must be wrong ....
If it is the same as the 897, which is basically the same >>>>>>>>>>>> radio in a different case, then you push the select knob and >>>>>>>>>>>> then use it to tune in 1 MHz steps.
Jeff
nah no good the push in function of the select knob doesn't >>>>>>>>>> work....shows up in the menu though as setable for various >>>>>>>>>> functions.....oh well
Is it a Yaesu or a Yeasu? The latter comes with 11 meters as
standard.
n my TS50 for mobile mobile...
Doesn't surprise me. Shitty 455kHz ceramic filters versus
10.something MHz crystal ones. Apart from the 817 I avoided those
like the plague. I did have a 480SAT for a while, that was nice but
I ended up getting rid of it because nobody had the CW or CWN
filters at the time. I'd have another one.
nice at the same time...miss them a bit
They're DIGITAL Jim. Black magic DSP stuff. But you can remote them
using a TM-D700 front panel apparently.
You weren't gullible enough to be sucked in were you? All the YouTube
fanboi stuff.
Sysop: | Keyop |
---|---|
Location: | Huddersfield, West Yorkshire, UK |
Users: | 296 |
Nodes: | 16 (2 / 14) |
Uptime: | 58:36:59 |
Calls: | 6,652 |
Calls today: | 4 |
Files: | 12,200 |
Messages: | 5,331,145 |