1. Forum
  2. Usenet
  3. UK.D-I-Y

  • What's this drill/jig?

    From RJH@21:1/5 to All on Wed Apr 17 09:04:34 2024
    I could use one of these (drilling a 15 or so degree channel) to assemble some frames, and this one looks pretty good - any idea what make it is, or any recommendations for something similar?

    https://youtube.com/watch?v=vIHF3VSKOnA

    --
    Cheers, Rob, Sheffield UK

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Andy Burns@21:1/5 to RJH on Wed Apr 17 10:17:41 2024
    RJH wrote:

    I could use one of these (drilling a 15 or so degree channel) to assemble some
    frames, and this one looks pretty good - any idea what make it is

    Most likely a Kreg pocket hole jig

    <https://www.kregtool.com/shop/pocket-hole-joinery/pocket-hole-jigs/>

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Andy Burns@21:1/5 to Andy Burns on Wed Apr 17 10:32:31 2024
    Andy Burns wrote:

    RJH wrote:

    any idea what make it is

    Most likely a Kreg pocket hole jig

    Specifically, a discontinued model

    <https://www.kregtool.com/support/faqs-product-info/discontinued-products/kreg-pocket-hole-jig-k5-master-system/K5MS.html>

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Pancho@21:1/5 to RJH on Wed Apr 17 11:19:37 2024
    On 17/04/2024 10:04, RJH wrote:
    I could use one of these (drilling a 15 or so degree channel) to assemble some
    frames, and this one looks pretty good - any idea what make it is, or any recommendations for something similar?

    https://youtube.com/watch?v=vIHF3VSKOnA


    Why would he bother? Given he painted the door, why not just drill holes
    from the front and use filler.

    I guess if you have spent the money on such a jig, you want to get some
    use out of it.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From RJH@21:1/5 to Pancho on Wed Apr 17 12:17:12 2024
    On 17 Apr 2024 at 11:19:37 BST, Pancho wrote:

    On 17/04/2024 10:04, RJH wrote:
    I could use one of these (drilling a 15 or so degree channel) to assemble some
    frames, and this one looks pretty good - any idea what make it is, or any
    recommendations for something similar?

    https://youtube.com/watch?v=vIHF3VSKOnA



    Forgot to add - 1 minute in.

    Why would he bother? Given he painted the door, why not just drill holes
    from the front and use filler.

    I guess if you have spent the money on such a jig, you want to get some
    use out of it.

    There is that . . .

    --
    Cheers, Rob, Sheffield UK

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From RJH@21:1/5 to Andy Burns on Wed Apr 17 12:16:17 2024
    On 17 Apr 2024 at 10:32:31 BST, Andy Burns wrote:

    Andy Burns wrote:

    RJH wrote:

    any idea what make it is

    Most likely a Kreg pocket hole jig

    Specifically, a discontinued model

    <https://www.kregtool.com/support/faqs-product-info/discontinued-products/kreg-pocket-hole-jig-k5-master-system/K5MS.html>

    Excellent, thanks - reassuringly priced too . . .
    --
    Cheers, Rob, Sheffield UK

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)