My daily driver, some years back, seemed to develop random halts/reboots. Mainly running under W7.

After some inconclusive testing I put it to one side and moved to another
PC.

Now I am looking at juggling cases, mother boards and PSUs to fit in my
recent eBay purchase of a graphics card, I am running up my older systems
to see how they fare.

This system (in the Home Theatre case) has W7 installed in two locations (according to the Linux boot loader) and Linux.

I am running it under Linux for the moment.

I think I had a couple of unplanned reboots when I wasn't watching (but
can't be sure this wasn't Linux catching up on years of missed updates) so
I decided to try and recall my shell programming skills.

I now have one terminal window in a "while true" loop redirecting "uptime"
to a log file.

The other terminal window has a "tail -f" on the log file.

This has been running for over 6 days now without any apparent hiccup, but
with a load average of 0.

I am now wondering if I should simulate a load to get the CPU a bit warmer
and the SSD a bit more active.

Any suggestions for simple activities which could do this?

Cheers


Dave R


--
AMD FX-6300 in GA-990X-Gaming SLI-CF running Windows 7 Pro x64

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

Am 19.04.2023 um 13:17:56 Uhr schrieb David:

I am now wondering if I should simulate a load to get the CPU a bit
warmer and the SSD a bit more active.

Use the "stress" command and use lm-sensors or PSensors to monitor the
CPU temperature. Do the same for the GPU with glmark2.

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On Wed, 19 Apr 2023 19:32:53 +0200, Marco Moock wrote:

Am 19.04.2023 um 13:17:56 Uhr schrieb David:

I am now wondering if I should simulate a load to get the CPU a bit
warmer and the SSD a bit more active.

Use the "stress" command and use lm-sensors or PSensors to monitor the
CPU temperature. Do the same for the GPU with glmark2.

Thanks.
In the end I just left it running.
It has been fine until today.

So I decided to start up W7 and see how that went.

Fine for 30 minutes or so then powered off then restarted.
Booted up then powered off again.
Then it wouldn't get past grub when I tried to go back into Linux.

Letting it cool down for a while then will test under Linux as suggested.

I can see myself having to switch mother boards around to see if the fault moves.

Oh, just wondering if GPU temperature is a separate thing if the GPU is integrated with the CPU.
Been a long time since I tinkered.

Cheers



Dave R


--
Dell Latitude 7280 with Full HD and Thunderbolt (woo hoo)

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On Wed, 19 Apr 2023 13:17:56 +0000, David wrote:

My daily driver, some years back, seemed to develop random
halts/reboots. Mainly running under W7.

After some inconclusive testing I put it to one side and moved to
another PC.

Now I am looking at juggling cases, mother boards and PSUs to fit in my recent eBay purchase of a graphics card, I am running up my older
systems to see how they fare.

This system (in the Home Theatre case) has W7 installed in two locations (according to the Linux boot loader) and Linux.

I am running it under Linux for the moment.

I think I had a couple of unplanned reboots when I wasn't watching (but
can't be sure this wasn't Linux catching up on years of missed updates)
so I decided to try and recall my shell programming skills.

I now have one terminal window in a "while true" loop redirecting
"uptime"
to a log file.

The other terminal window has a "tail -f" on the log file.

This has been running for over 6 days now without any apparent hiccup,
but with a load average of 0.

I am now wondering if I should simulate a load to get the CPU a bit
warmer and the SSD a bit more active.

Any suggestions for simple activities which could do this?

Noting that there is a motherboard tuning utility which is running under Windows so that may also be a suspect.

Hole in my bucket time if I have to run a failing system to try and
diagnose in flight.

It might be worth putting in an alternative SSD and trying a clean install
of Windows 10.

Cheers



Dave R





--
On the Acer All-In-One

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On Wed, 19 Apr 2023 19:32:53 +0200, Marco Moock wrote:

Am 19.04.2023 um 13:17:56 Uhr schrieb David:

I am now wondering if I should simulate a load to get the CPU a bit
warmer and the SSD a bit more active.

Use the "stress" command and use lm-sensors or PSensors to monitor the
CPU temperature. Do the same for the GPU with glmark2.

glmark2 isn't in my version of Ubuntu.

Do you have an alternative?

[Can't recall the distribution name at the moment.]

Cheers


Dave R


--
On the Acer All-In-One

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On Fri, 12 May 2023 17:37:44 +0000, Dave R wrote:

On Wed, 19 Apr 2023 19:32:53 +0200, Marco Moock wrote:

Am 19.04.2023 um 13:17:56 Uhr schrieb David:

I am now wondering if I should simulate a load to get the CPU a bit
warmer and the SSD a bit more active.

Use the "stress" command and use lm-sensors or PSensors to monitor the
CPU temperature. Do the same for the GPU with glmark2.

glmark2 isn't in my version of Ubuntu.

Do you have an alternative?

[Can't recall the distribution name at the moment.]

Cheers

Dave R

Linux Mint 20 Cinnamon, apparently.



--
On the Acer All-In-One

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On 19 Apr 2023 at 14:17:56 BST, "David" <wibble@btinternet.com> wrote:

My daily driver, some years back, seemed to develop random halts/reboots. Mainly running under W7.

Usually your PSU going bad, if there's nothing obvious like stuck fans
or "reboots when I kick it" type issues.

Cheers - Jaimie

--
"In my opinion, we don't devote nearly enough
scientific research to finding a cure for jerks."
-- Calvin/Bill Watterson

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On Wed, 19 Apr 2023 13:17:56 +0000, David wrote:

My daily driver, some years back, seemed to develop random
halts/reboots. Mainly running under W7.

After some inconclusive testing I put it to one side and moved to
another PC.

Now I am looking at juggling cases, mother boards and PSUs to fit in my recent eBay purchase of a graphics card, I am running up my older
systems to see how they fare.

This system (in the Home Theatre case) has W7 installed in two locations (according to the Linux boot loader) and Linux.

I am running it under Linux for the moment.

I think I had a couple of unplanned reboots when I wasn't watching (but
can't be sure this wasn't Linux catching up on years of missed updates)
so I decided to try and recall my shell programming skills.

I now have one terminal window in a "while true" loop redirecting
"uptime"
to a log file.

The other terminal window has a "tail -f" on the log file.

This has been running for over 6 days now without any apparent hiccup,
but with a load average of 0.

I am now wondering if I should simulate a load to get the CPU a bit
warmer and the SSD a bit more active.

Any suggestions for simple activities which could do this?

Seems to have given up the ghost now.
Been running Linux for a week or so.
Now appears to have no power.

Further investigation when the alligators get below arse level.

Cheers



Dave R




--
Dell Latitude 7280 with Full HD and Thunderbolt (woo hoo)

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)