I need to update the Service Pack 3 for FTM 2008 not Windows 7. I could only find instructions for updating the FTM2008 SP3 using Windows Vista.

Shirlee


-----Original Message-----
From: Kate
Sent: Wednesday, August 09, 2017 6:16 PM Newsgroups:
soc.genealogy.australia+nz
To: genanz@rootsweb.com
Subject: Re: FTM 2008



"Shirley Cantwell" wrote in message news:mailman.1157.1502250110.1443.genanz@rootsweb.com...

My computer has finally had enough and the IT guy managed to get the data
off and onto a laptop and he loaded the original FTM 2008 software without updates. The laptop uses Windows 7 for the time being. I need to update
the Service Pack 3. Can anyone help?

Shirlee
Wellington, NZ


Hi Shirley

Have you looked at your Windows Updates to see if it is available. It might
be there waiting to be downloaded.

Regards

Kate
Sydney, Australia


-------------------------------
To unsubscribe from the list, please send an email to GENANZ-request@rootsweb.com with the word 'unsubscribe' without the quotes
in the subject and the body of the message

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

Hi Doug

FTM 2008 did have a SP3 but I need to know if it works with Windows 7. When
I had it on my computer I remember it uploading an update but I was only
using Windows Vista at the time.

I have read the article below and it is about a registry update which
enables Family Tree Maker to utilize the current version of Internet
Explorer. I don't know if my FTM 2008 is using the Internet Explorer and I would not know where to find out if I was.

Shirlee


-----Original Message-----
From: Doug Laidlaw
Sent: Monday, August 14, 2017 8:00 PM Newsgroups: soc.genealogy.australia+nz To: genanz@rootsweb.com
Subject: Re: FTM 2008

Did FTM 2008 _have_ a SP3, or do you need Windows SP3 before FTM will run?

See https://support.mackiev.com/888547-Registry-Update-for-Family-Tree-Maker-2008-2012

Doug.

On 09/08/17 18:01, Kate wrote:

Sorry, thought you meant Windows. Perhaps FTM Support could advise. https://support.mackiev.com/

Kate

"Shirlee Cantwell" wrote in message news:mailman.1159.1502264227.1443.genanz@rootsweb.com...

I need to update the Service Pack 3 for FTM 2008 not Windows 7. I could
only
find instructions for updating the FTM2008 SP3 using Windows Vista.

Shirlee

-------------------------------
To unsubscribe from the list, please send an email to GENANZ-request@rootsweb.com with the word 'unsubscribe' without the quotes
in the subject and the body of the message

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

That was before I even looked at FTM. Legacy does require a minimum
version of IE. I tried to run Legacy on Win7, and it said I needed to
upgrade IE. If you didn't see a message like that, you are O.K.

Mackiev seem to have some good help in this regard. This link may cover
your 2008 files:

https://support.mackiev.com/893458-Importing-an-Existing-File-in-Family-Tree-Maker

For data too old even for that, use the link at the bottom of the page.

I was looking for the minimum requirements for FTM 2008. The best I
could find was:

https://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/windows-7-and-family-tree-maker-2009-compatibility/5b9c2a04-2b28-483d-be83-ccc84923b6a5?auth=1

HTH,

Doug.

On 14/08/17 18:45, Shirlee Cantwell wrote:

Hi Doug

FTM 2008 did have a SP3 but I need to know if it works with Windows 7.
When I had it on my computer I remember it uploading an update but I was
only using Windows Vista at the time.

I have read the article below and it is about a registry update which enables Family Tree Maker to utilize the current version of Internet Explorer. I don't know if my FTM 2008 is using the Internet Explorer
and I would not know where to find out if I was.

Shirlee

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)