How to Install and Use Vauxhall Op Com V1.39 Software
If you own a Vauxhall car and want to diagnose and repair any faults in your vehicle, you need a reliable and easy-to-use diagnostic tool. One of the best options available is the Vauxhall Op Com V1.39 software, which can be downloaded from the internet
as a .rar file. In this article, we will show you how to install and use this software on your Windows PC.

What is Vauxhall Op Com V1.39 Software?
Vauxhall Op Com V1.39 software is a professional diagnostic tool that can communicate with various electronic control units (ECUs) in your Vauxhall car. It can read and clear fault codes, display live data, perform output tests, program keys, reset
service indicators, and more. It supports most Vauxhall models from 1992 to 2014, including Astra, Corsa, Zafira, Vectra, Insignia, Meriva, etc.

vauxhall op com v1.39 software.rar
DOWNLOAD https://t.co/vNKgJXiybW



How to Install Vauxhall Op Com V1.39 Software?
To install Vauxhall Op Com V1.39 software on your PC, you need to follow these steps:


Download the Vauxhall Op Com V1.39 software.rar file from a trusted source. You can find it on various online forums or websites that offer car diagnostic tools.
Extract the .rar file using a software like WinRAR or 7-Zip. You will get a folder named "OP-COM_131223c_EN" that contains the installation files.
Run the "OP-COM.exe" file as administrator and follow the instructions on the screen. You will need to select the language, accept the license agreement, choose the installation directory, and create a desktop shortcut.
When the installation is complete, connect the Op Com interface device to your PC using a USB cable. The device is a small box with a 16-pin OBD connector on one end and a USB connector on the other end.
Wait for the device driver to be installed automatically by Windows. You can check the device status in the Device Manager under "Ports (COM & LPT)". It should be named "USB Serial Port (COMx)" where x is a number.
Launch the Op Com software from the desktop shortcut or the Start menu. You will see the main interface of the software with various options and menus.

How to Use Vauxhall Op Com V1.39 Software?
To use Vauxhall Op Com V1.39 software to diagnose and repair your car, you need to follow these steps:


Connect the Op Com interface device to your car's OBD port using the 16-pin OBD connector. The OBD port is usually located under the dashboard near the steering wheel.
Turn on the ignition of your car but do not start the engine.
On the Op Com software interface, click on "Diagnostics" and select your car model and year from the drop-down menus.
Click on "Test Interface" to check if the communication between the PC and the car is successful. You should see a green message saying "Interface test OK". If not, check your connections and settings.
Click on "Select ECU" to choose which electronic control unit you want to access. You can select from various categories such as Engine, Transmission, ABS, Airbag, etc.
Click on "Fault Codes" to read and clear any error codes stored in the ECU. You can also click on "Measuring Blocks" to view live data from various sensors and actuators.
Click on "Actuator Test" to perform output tests on various components such as fuel injectors, relays, fans, etc.
Click on "Programming" to program new keys, immobilizer codes, VIN numbers, etc.
Click on "Service Interval Reset" to reset the service indicator light on your dashboard.

Note: Some functions may require additional hardware or software such as an EEPROM programmer or a security code calculator. Please refer to the user manual or online guides for more details.
35727fac0c

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)