State of the Art - Novel InFlow Tech - Featured Project Development;
·2-IMPLOTURBOCOMPRESSOR; One Moving Part System Excellence Design - The
InFlow Interaction comes from Macro-Flow and goes to Micro-Flow by
Implossion - Only One Compression Step; Inflow, Compression and outflow at
one simple circular dynamic motion Concept.
*·“Excellence in Design" because is only one moving part. Only one
unique compression step. Inflow and out flow at the same one system, This invention by its nature a logic and simple conception in the dynamics flow mechanics area. The invention is a wing made of one piece in a rotating
motion, contained in a pair cavity system connected by implocavity, and interacting dynamically with a flow, that passes internally "Imploded"
through its simple mechanism. This flow can be gas (air) or liquid
(water). And have two different applications, in two different
form-function; this one can be received (using the dynamic flow passage,
as a receiver). Or it can be generated (with a power plant, generating a propulsion).
An example cut be, as a Bike needs a chain to work from motor to wheel.
And for the Imploturbocompressor application, cut be as; in a circumstance
at the engine, as an A-activate flow, and with a a tube flow conduit going
to the wheel as a B-receiving-flow the work use.
To see a Imploturbocompressor animation, is posible on a simple way, just
to check the Hurricane Satellite view, and is the same implo inflow way
nature.
And when the flow that is received and that is intended to be used at
best, must no necessarily by a exhausting or rejection gas, but must be a dynamic passing gas or liquid flow with the only intention to count it or
to measure it. This could be possible at the passing and interacting
period when it passes inside its simple mechanism. This can be in any
point of the work flow trajectory.
In case the flow that is received is a water falling by gravity, and a
dynamo is placed on the rotary bar, the Imploturbocompressor can profit an
be obtained by generating? electricity such as obtained by the pelton
well, like I say before. The "Imploturbocompressor", is a good option to
pump water, or a gas flow, and all kinds of pipes lines dynamic moves.
Or only receive the air-liquid flow, in order to measure its passage with
a counter placed on the bar, because when this flow passes through the
simple mechanism of a rotating wing made of only one piece it interacts
within the implocavities system. And this flow can be air wind, with the difference of can have an horizontal work position, and that particle
technical circumstances make an easy way for urban building work new use application, and have wind flow from all the sides 180 grades view. The aforementioned information about this invention refers to technical applications, such as a dynamic flow receiver. (whether being gas or
liquid).
With the appropriate power plant and the appropriate dimensioning and
number of RPM this invention is also feasible to generate an atmospheric
air propulsion and the auto-propulsion of an aircraft. Being an effective
and very simple system that implodes and compresses the atmospheric air
permits the creation of a new concept of propulsion for aircrafts, due to
its simple mechanism and innovative nature. At the place of the aircraft
were the system appears and the manner how the propulsion direction can be oriented with a vectorial flow (no lobster tail) with I call "yo-yo
system" (middle cut (at the shell) to move, one side loose), guided and balanced is feasible to create a new concept of TOVL-vertical take-off
landing, Because the exhaust propulsion can going out radial in all the
360 vectorial positions, going out direct all the time in all the vectors direction. With his rotor cover for an better furtive fly, like going down
of a bridge for example.
Likewise, with the due form and dimensioning, and considering the liquid density and the due revolutions for this element there could be generated
a propulsion (water) in order to move an aquatic ship, whether on surface
or under water. Also can be a good option to pump liquid combustion for a rocket propulsion.
Making a metaphoric comparison with the intention to expose it more
clearly for a better comprehension of this innovative technical detail, it would be similar to the trajectory and motion of a dynamic flow compared
with a rope (extended) that passes through the system would have now a
knot (without obstructing the flow), so the complete way of the flow at
the imploturbocompresor system have three direct ways and between make two different turns; direct way (entrance) - turn - direct way (implocavity) -
turn - direct way (exit), all this in a 1 simple circular move system
concept.
Its prudent to mention that the curves and the inclinations of the blades
of a rotating wing made of this invention, is conferred by its shape and function a structural rigidity allowing it to conduct and alter
appropriately the dynamic flow passing through its system.
--
State of the Art / Novel Rotary-Turbo-InFlow Tech / Featured Development - GEARTURBINE PROJECT Have the similar basic system of the Aeolipile Heron
Steam Turbine device from Alexandria 10-70 AD * With Retrodynamic =
DextroRPM VS LevoInFlow + Ying Yang Way Power Type - Non Waste Looses
*8X/Y Thermodynamic CYCLE Way Steps. Higher efficient percent. No blade
erosion by sand & very low heat target signature Pat:197187IMPI MX Dic1991 Atypical Motor Engine Type
__!__
-----o-----
" "
[IMG]
http://www.polytechforum.com/img/4v[/IMG]
--
posted from
http://www.polytechforum.com/mech/state-ofthe-artnovel-inflowtech-2imploturbocompressor-system-14224-.htm
using PolytechForum's Web, RSS and Social Media Interface to
sci.engr.mech and other engineering groups
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)