• Being an electrical engineer come new here and asking something.

    From Clark Change@21:1/5 to All on Wed Aug 31 04:26:32 2016
    Greetings to all, I am new here. I am an electrical engineer. I had been using siemens products(s7 s5 wincc ) for over ten years.

    Recently, I found this group and joined in. It seems that it is PID that we talk about, and I wanted to talk, as mostly in industry, PID theory is running by PLCs / special controllers.

    In other way, I am new to google groups, so is there any kind guy who could tell me other groups disused in PLC, SCADA or other industry control technology?

    Siemens forum ist good, but only about their pruduct, and sps-forum.de is down.

    Any topic is appreciated.

    Best regards,

    C.Change

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Tim Wescott@21:1/5 to Clark Change on Wed Aug 31 12:49:14 2016
    On Wed, 31 Aug 2016 04:26:32 -0700, Clark Change wrote:

    Greetings to all, I am new here. I am an electrical engineer. I had been using siemens products(s7 s5 wincc ) for over ten years.

    Recently, I found this group and joined in. It seems that it is PID that
    we talk about, and I wanted to talk, as mostly in industry, PID theory
    is running by PLCs / special controllers.

    In other way, I am new to google groups, so is there any kind guy who
    could tell me other groups disused in PLC, SCADA or other industry
    control technology?

    Siemens forum ist good, but only about their pruduct, and sps-forum.de
    is down.

    Any topic is appreciated.

    This is a USENET newsgroup, which Google Groups aliases. It's been dead
    for about 5-10 years.

    It used to be full of some really sharp industrial control guys, as well
    as some people who embed controllers into products (which is where you
    find a lot of control loops being implemented these days -- you don't see
    many quad copters with PLCs, but every one has several PID loops).

    I don't know if there are any good control systems groups out there --
    most of the embedded control postings I see are on comp.dsp,
    dsprelated.com, sci.electronics.design, and various Reddit groups. I
    don't look hard for industrial control groups, but you may want to dig
    through Reddit and see what you can find.

    Or, post here and see if you collect a following.

    --

    Tim Wescott
    Wescott Design Services
    http://www.wescottdesign.com

    I'm looking for work -- see my website!

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Clark Change@21:1/5 to Tim Wescott on Wed Aug 31 22:25:03 2016
    On Thursday, September 1, 2016 at 1:49:20 AM UTC+8, Tim Wescott wrote:
    On Wed, 31 Aug 2016 04:26:32 -0700, Clark Change wrote:

    Greetings to all, I am new here. I am an electrical engineer. I had been using siemens products(s7 s5 wincc ) for over ten years.

    Recently, I found this group and joined in. It seems that it is PID that
    we talk about, and I wanted to talk, as mostly in industry, PID theory
    is running by PLCs / special controllers.

    In other way, I am new to google groups, so is there any kind guy who
    could tell me other groups disused in PLC, SCADA or other industry
    control technology?

    Siemens forum ist good, but only about their pruduct, and sps-forum.de
    is down.

    Any topic is appreciated.

    This is a USENET newsgroup, which Google Groups aliases. It's been dead
    for about 5-10 years.

    It used to be full of some really sharp industrial control guys, as well
    as some people who embed controllers into products (which is where you
    find a lot of control loops being implemented these days -- you don't see many quad copters with PLCs, but every one has several PID loops).

    I don't know if there are any good control systems groups out there --
    most of the embedded control postings I see are on comp.dsp,
    dsprelated.com, sci.electronics.design, and various Reddit groups. I
    don't look hard for industrial control groups, but you may want to dig through Reddit and see what you can find.

    Or, post here and see if you collect a following.

    --

    Tim Wescott
    Wescott Design Services
    http://www.wescottdesign.com

    I'm looking for work -- see my website!

    Great Thanks, I will find them by your way and post back.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Phil Hobbs@21:1/5 to Tim Wescott on Thu Sep 1 12:31:01 2016
    On 08/31/2016 01:49 PM, Tim Wescott wrote:
    On Wed, 31 Aug 2016 04:26:32 -0700, Clark Change wrote:

    Greetings to all, I am new here. I am an electrical engineer. I had been
    using siemens products(s7 s5 wincc ) for over ten years.

    Recently, I found this group and joined in. It seems that it is PID that
    we talk about, and I wanted to talk, as mostly in industry, PID theory
    is running by PLCs / special controllers.

    In other way, I am new to google groups, so is there any kind guy who
    could tell me other groups disused in PLC, SCADA or other industry
    control technology?

    Siemens forum ist good, but only about their pruduct, and sps-forum.de
    is down.

    Any topic is appreciated.

    This is a USENET newsgroup, which Google Groups aliases. It's been dead
    for about 5-10 years.

    It used to be full of some really sharp industrial control guys, as well
    as some people who embed controllers into products (which is where you
    find a lot of control loops being implemented these days -- you don't see many quad copters with PLCs, but every one has several PID loops).

    I don't know if there are any good control systems groups out there --
    most of the embedded control postings I see are on comp.dsp,
    dsprelated.com, sci.electronics.design, and various Reddit groups. I
    don't look hard for industrial control groups, but you may want to dig through Reddit and see what you can find.

    Or, post here and see if you collect a following.


    Yeah, resurrecting SEC would be good.

    Cheers

    Phil Hobbs

    --
    Dr Philip C D Hobbs
    Principal Consultant
    ElectroOptical Innovations LLC
    Optics, Electro-optics, Photonics, Analog Electronics

    160 North State Road #203
    Briarcliff Manor NY 10510

    hobbs at electrooptical dot net
    http://electrooptical.net

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)