I'm designing a project with a small LCD on the panel.
Where can I go to find a matching bezel? There's gotta be an
Amce Bezel Co. out there.
(Size yet TBD, may well be find bezel first, then
choose display...)
On Mon, 4 Jan 2021 04:47:22 +0000 (UTC), David Lesher
<wb8foz@panix.com> wrote:
I'm designing a project with a small LCD on the panel.
Where can I go to find a matching bezel? There's gotta be an
Amce Bezel Co. out there.
(Size yet TBD, may well be find bezel first, then
choose display...)
We usually buy a polycarb sticker that paves over our entire front
panel, and includes a clear window for the LCD and little frosty
circles to let discrete LEDs shine through. But the setup costs for
that make it impractical for small volumes.
https://www.dropbox.com/s/j3fycoyhpus0vpc/a4.jpg?raw=1
On Mon, 4 Jan 2021 04:47:22 +0000 (UTC), David Lesher
<wb8foz@panix.com> wrote:
I'm designing a project with a small LCD on the panel.
Where can I go to find a matching bezel? There's gotta be an
Amce Bezel Co. out there.
(Size yet TBD, may well be find bezel first, then
choose display...)
We usually buy a polycarb sticker that paves over our entire front
panel, and includes a clear window for the LCD and little frosty
circles to let discrete LEDs shine through. But the setup costs for
that make it impractical for small volumes.
https://www.dropbox.com/s/j3fycoyhpus0vpc/a4.jpg?raw=1
On 1/4/2021 10:01 AM, jlarkin@highlandsniptechnology.com wrote:
On Mon, 4 Jan 2021 04:47:22 +0000 (UTC), David Lesher
<wb8foz@panix.com> wrote:
I'm designing a project with a small LCD on the panel.
Where can I go to find a matching bezel? There's gotta be an
Amce Bezel Co. out there.
(Size yet TBD, may well be find bezel first, then
choose display...)
We usually buy a polycarb sticker that paves over our entire front
panel, and includes a clear window for the LCD and little frosty
circles to let discrete LEDs shine through. But the setup costs for
that make it impractical for small volumes.
https://www.dropbox.com/s/j3fycoyhpus0vpc/a4.jpg?raw=1
That, however, brings up another possibility.
A polymer (I want to say "vinyl" but there's more than just that out
there!) face plate, possibly laser or ink jet printed on the back side,
with the legends for the unit. Then glued into place with some glue.
Plexi would do it also. (For that maybe front print clear vinyl for the >label, and a plexi overlay?)
Just tossing ideas out there; only David Lesher can say what will work
or not for this item.
RwP
Sysop: | Keyop |
---|---|
Location: | Huddersfield, West Yorkshire, UK |
Users: | 294 |
Nodes: | 16 (2 / 14) |
Uptime: | 245:47:43 |
Calls: | 6,626 |
Calls today: | 2 |
Files: | 12,175 |
Messages: | 5,320,569 |