From john larkin@21:1/5 to All on Fri Dec 1 11:18:21 2023
I want to stand a small PCB edgewise on a bigger board. It will reflow
solder but we need to stand it up before we reflow.
I tacked a board onto a board with Bondic, the UV-cure epoxy, and we
ran it through the reflow oven. Bondic specs 150c max but it looks
fine, didn't fall over or anything.
I want to stand a small PCB edgewise on a bigger board. It will reflow
solder but we need to stand it up before we reflow.
I tacked a board onto a board with Bondic, the UV-cure epoxy, and we
ran it through the reflow oven. Bondic specs 150c max but it looks
fine, didn't fall over or anything.