• Help identifying connector

    From Mike Mocha@21:1/5 to All on Tue Jul 26 05:47:32 2022
    XPost: sci.electronics.components

    Hey all,

    I need some help to identify the manufacturer of the "DIAG" connector
    shown in the imgur link. I've done a lot of searching on Digikey, Mouser,
    etc, and I'm not having any luck. The pin pitch looks to be about 2.5
    mm. The inside dimensions are about 7.75 mm by 6.1 mm. These pins wire
    to a serial port for use with a terminal emulator. If someone could just
    give a clue on the OEM I can do the rest. Thanks for any help!


    https://imgur.com/a/9yGEPXR

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From chrisnd@privacy.net@21:1/5 to Mike Mocha on Tue Jul 26 12:19:18 2022
    XPost: sci.electronics.components

    On 26/07/2022 06:47, Mike Mocha wrote:

    Hey all,

    I need some help to identify the manufacturer of the "DIAG" connector
    shown in the imgur link. I've done a lot of searching on Digikey, Mouser, etc, and I'm not having any luck. The pin pitch looks to be about 2.5
    mm. The inside dimensions are about 7.75 mm by 6.1 mm. These pins wire
    to a serial port for use with a terminal emulator. If someone could just give a clue on the OEM I can do the rest. Thanks for any help!


    https://imgur.com/a/9yGEPXR

    If you end up stuck, I would try three sections off a standard double
    2.5mm pin header...
    Chris

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Dan Purgert@21:1/5 to ChrisND@privacy.net on Tue Jul 26 11:39:03 2022
    XPost: sci.electronics.components

    -----BEGIN PGP SIGNED MESSAGE-----
    Hash: SHA512

    ["Followup-To:" header set to sci.electronics.components.]
    ChrisND@privacy.net wrote:
    On 26/07/2022 06:47, Mike Mocha wrote:

    Hey all,

    I need some help to identify the manufacturer of the "DIAG" connector
    shown in the imgur link. I've done a lot of searching on Digikey, Mouser, >> etc, and I'm not having any luck. The pin pitch looks to be about 2.5
    mm. The inside dimensions are about 7.75 mm by 6.1 mm. These pins wire
    to a serial port for use with a terminal emulator. If someone could just
    give a clue on the OEM I can do the rest. Thanks for any help!


    https://imgur.com/a/9yGEPXR

    If you end up stuck, I would try three sections off a standard double
    2.5mm pin header...
    Chris

    looks like a pretty "standard" shrouded 2x3-pin header. Might be
    intended to plug into a keyed IDC connector for a ribbon cable?


    -----BEGIN PGP SIGNATURE-----

    iQIzBAEBCgAdFiEE3asj+xn6fYUcweBnbWVw5UznKGAFAmLf0m4ACgkQbWVw5Uzn KGCvnxAAvIrd2N86gLLdNlbwgfhhmnLVi6jjcWXvrTVm1qxeq/VPM8T2re2C2rWy gTbsYpll7CALwo0Q0yJ8dO4HmJ16J6qyLrT/0hfOirAIG47x+8A34TSap+jhKQ8F 6YBe7iyhnrFKDFiPbVJvplFqdkGSt1BrXDqiDcWuTt1vH7N6wOTaSNPHGjTuDAyq 3x0Pb2vZC9HtYwgVZLrAZwOAlG5RJCxnx+wLamsf9fHf4g5Ji03KjxHyWG7bjkx8 8mCPX5fh9zGXydO+ZOM9aymaj2n1PNtolC9gkp1m7HiIjao6de0MsKh99DlcV9XK eIxtf91XxXAqU17x454z7GMPCmITspQtgh0012NYQpd5xkKtCFpnckFZIK1DC81a jL6vNatwiRD3qt4+yPu1S3GClBOKV8nTj9STnPLXWwJV7bxW+HOQvKeNPpcxU7Wk 4H+bHx6pzj5WrSg/nzwEf2B5vsISMjtIxT2rlZmbtRwMBb/vMQ5kM/PR8wGTVWCB 61io63L2IeZpNTUmaq6dbzArmMs2Qjx6xv0DK5ki7R3LYXx+LxdH9kW7K5D7qA8b c48PXVeDgKKvBCDLJKSQ6NPTGIYzEWJamu75y+qjdbwKW3M1gFKcNCkjvGa9SKIw yVdKJnOwKT0d4q7Q9EkjE623nLFUcEc9oU0IuVCr+agdA3PzDgU=
    =nKnE
    -----END PGP SIGNATURE-----

    --
    |_|O|_|
    |_|_|O| Github: https://github.com/dpurgert
    |O|O|O| PGP: DDAB 23FB 19FA 7D85 1CC1 E067 6D65 70E5 4CE7 2860

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Lasse Langwadt Christensen@21:1/5 to All on Tue Jul 26 04:50:11 2022
    https://www.molex.com/molex/products/part-detail/pcb_headers/0901301106

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Mike Mocha@21:1/5 to All on Tue Jul 26 18:10:58 2022
    XPost: sci.electronics.components

    https://www.molex.com/molex/products/part-detail/pcb_headers/0901301106

    Wow that's it! Thanks so much! Looks like Digikey has the mating parts!

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)