• What is an EMF meter really for?

    From Tim R@21:1/5 to All on Wed Jun 1 14:35:27 2022
    I came across an article about a cattle mutilation and the guy was using an EMF meter to look for aliens or something. His meter detected them, no surprise.

    I thought the EMF meter was invented by the movie industry, but apparently they are real. Google tells me they are widely purchased by ghost hunters. shudder! Not much hope for humanity. But I digress.

    So is there an actual use for one, maybe in electronics engineering or something? I haven't seen one discussed in this group, I did search.

    What do they do, and why?

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From KenW@21:1/5 to timothy42bach@gmail.com on Wed Jun 1 16:20:36 2022
    On Wed, 1 Jun 2022 14:35:27 -0700 (PDT), Tim R
    <timothy42bach@gmail.com> wrote:

    I came across an article about a cattle mutilation and the guy was using an EMF meter to look for aliens or something. His meter detected them, no surprise.

    I thought the EMF meter was invented by the movie industry, but apparently they are real. Google tells me they are widely purchased by ghost hunters. shudder! Not much hope for humanity. But I digress.

    So is there an actual use for one, maybe in electronics engineering or something? I haven't seen one discussed in this group, I did search.

    What do they do, and why?

    I did a search and found loads of information. Try it !


    KenW

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Mike Coon@21:1/5 to All on Thu Jun 2 07:55:55 2022
    In article <d9216cff-a4d7-42df-b5ae-a95902e8ad81n@googlegroups.com>, timothy42bach@gmail.com says...

    I came across an article about a cattle mutilation and the guy was using an EMF meter to look for aliens or something. His meter detected them, no surprise.

    I thought the EMF meter was invented by the movie industry, but apparently they are real. Google tells me they are widely purchased by ghost hunters. shudder! Not much hope for humanity. But I digress.

    So is there an actual use for one, maybe in electronics engineering or something? I haven't seen one discussed in this group, I did search.

    What do they do, and why?

    What is your definition of "real"? Would anything sold by Gwyneth
    Paltrow qualify? There are reasons for wanting to know what the electric
    field strength is...

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Jeff Liebermann@21:1/5 to timothy42bach@gmail.com on Thu Jun 2 09:00:43 2022
    On Wed, 1 Jun 2022 14:35:27 -0700 (PDT), Tim R
    <timothy42bach@gmail.com> wrote:

    I came across an article about a cattle mutilation and the guy was using an EMF meter to look for aliens or something. His meter detected them, no surprise.
    I thought the EMF meter was invented by the movie industry, but apparently they are real. Google tells me they are widely purchased by ghost hunters. shudder! Not much hope for humanity. But I digress.
    So is there an actual use for one, maybe in electronics engineering or something? I haven't seen one discussed in this group, I did search.
    What do they do, and why?

    EMF (electro-magnetic field) can be anything from 60 Hz power line
    radiation, to microwave emissions. The real EMF meters were designed
    to help measure specific EMF fields for measuring things like cell
    phone SAR (specific absorption rate), unwanted emissions for FCC type certification, radio/TV broadcast station antenna pattern, EMC
    (electromagnetic compatibility) testing, and personal RF safety such
    as might be encountered when working on a radio tower. Some typical applications: <https://www.narda-sts.com/en/applicationstechnology/occupational-safety/>

    Typical equipment:
    <https://www.narda-sts.com/en/all-products/> <http://www.extech.com/categories/electromagnetic-field-meters> <https://www.google.com/search?q=rf+field+strength+meter+3+axis&tbm=isch> Personal EMF meters: <https://en.wikipedia.org/wiki/Personal_RF_safety_monitor#Gallery>

    The low cost junk sold online is at best a crude imitation of a proper
    EMF meter mostly because they do not produce meaningful measurements
    that can be useful for design, installation, testing, and
    verification.

    If you purchased a junk EMF meter like this: <https://www.ebay.com/itm/363819859401>
    to find ghosts or determine if something might fry your brain, your
    brain is already fried. I have to confess that I bought one of these
    and found it useful for finding 60 Hz power line radiation but not
    much else. The sensitivity decreases rapidly with increasing RF
    frequency.

    Good luck
    --
    Jeff Liebermann jeffl@cruzio.com
    PO Box 272 http://www.LearnByDestroying.com
    Ben Lomond CA 95005-0272
    Skype: JeffLiebermann AE6KS 831-336-2558

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Tim R@21:1/5 to Jeff Liebermann on Thu Jun 2 09:36:52 2022
    On Thursday, June 2, 2022 at 12:00:52 PM UTC-4, Jeff Liebermann wrote:

    If you purchased a junk EMF meter like this: <https://www.ebay.com/itm/363819859401>
    to find ghosts or determine if something might fry your brain, your
    brain is already fried. I have to confess that I bought one of these
    and found it useful for finding 60 Hz power line radiation but not
    much else. The sensitivity decreases rapidly with increasing RF
    frequency.


    I won't claim a fresh brain but the advertising hype on these products did peg my BS meter.

    On the other hand, at about $20 for some of the cheapies, would they be useful to avoid hitting a power line drilling through a wall or digging in the garden? You mentioned 60 Hz power line radiation.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Jeff Liebermann@21:1/5 to timothy42bach@gmail.com on Thu Jun 2 11:09:05 2022
    On Thu, 2 Jun 2022 09:36:52 -0700 (PDT), Tim R
    <timothy42bach@gmail.com> wrote:

    On Thursday, June 2, 2022 at 12:00:52 PM UTC-4, Jeff Liebermann wrote:

    If you purchased a junk EMF meter like this:
    <https://www.ebay.com/itm/363819859401>
    to find ghosts or determine if something might fry your brain, your
    brain is already fried. I have to confess that I bought one of these
    and found it useful for finding 60 Hz power line radiation but not
    much else. The sensitivity decreases rapidly with increasing RF
    frequency.

    I won't claim a fresh brain but the advertising hype on these products did peg my BS meter.

    Well, maybe a baked brain.

    On the other hand, at about $20 for some of the cheapies, would they be useful to avoid hitting a power line drilling through a wall or digging in the garden? You mentioned 60 Hz power line radiation.

    No. The AC wiring in the wall is too narrow and probably too far away
    for the junk EMF meter to accurately locate it.

    I have one of these, which has an AC wiring locator feature: <https://www.zircon.com/instructions-documentation/multiscanner-pro-sl-instructions/>
    The current version is probably better: <https://www.zircon.com/tools/metalliscanner-m60c/> $55.
    This older one should work and is cheaper: <https://shop.zircon.com/multiscanner-440/> $30.
    I also borrow an AC circuit tracer and circuit breaker tracer from the neighborhood electrician as needed:
    <https://www.amprobe.com/product/at-6030/>
    You probably won't like the price. $1,800 list.

    One catch. These tend to use 9V batteries, which are becoming rather expensive. I've been switching to rechargeable LiIon 9V batteries: <https://www.ebay.com/itm/125325078582>
    About $5/ea, which is the same as alkaline but is rechargeable and I
    don't have to worry much about devices that draw current even when
    turned off.


    --
    Jeff Liebermann jeffl@cruzio.com
    PO Box 272 http://www.LearnByDestroying.com
    Ben Lomond CA 95005-0272
    Skype: JeffLiebermann AE6KS 831-336-2558

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From danny burstein@21:1/5 to Jeff Liebermann on Fri Jun 3 00:01:39 2022
    In <nslh9h1vu1a9q44vaabmtuj4gelidgva3l@4ax.com> Jeff Liebermann <jeffl@cruzio.com> writes:
    [snip]

    EMF (electro-magnetic field) can be anything from 60 Hz power line
    radiation, to microwave emissions.

    60 Hz? Newbie. 25 CPS is the way to go

    --
    _____________________________________________________
    Knowledge may be power, but communications is the key
    dannyb@panix.com
    [to foil spammers, my address has been double rot-13 encoded]

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Tim R@21:1/5 to danny burstein on Fri Jun 3 06:29:35 2022
    On Thursday, June 2, 2022 at 8:01:44 PM UTC-4, danny burstein wrote:

    60 Hz? Newbie. 25 CPS is the way to go

    --
    _____________________________________________________
    Knowledge may be power, but communications is the key
    dan...@panix.com
    [to foil spammers, my address has been double rot-13 encoded]

    I hope you're not one of the old fashioned types who still hang on to pi - surely you've converted to tau like all the cool people?

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Jeff Liebermann@21:1/5 to dannyb@panix.com on Fri Jun 3 08:33:27 2022
    On Fri, 3 Jun 2022 00:01:39 -0000 (UTC), danny burstein
    <dannyb@panix.com> wrote:

    In <nslh9h1vu1a9q44vaabmtuj4gelidgva3l@4ax.com> Jeff Liebermann <jeffl@cruzio.com> writes:
    [snip]

    EMF (electro-magnetic field) can be anything from 60 Hz power line >>radiation, to microwave emissions.

    60 Hz? Newbie. 25 CPS is the way to go

    Hardly. I prefer my power delivered as DC as Edison and the other
    patriarchs of power transmission intended it. For a time (early
    1970's), I had wall outlets that delivered 12V DC[1]. Before cheap DC
    to AC inverters were available, using 12V DC was quite common in
    recreational vehicles. Fortunately, some organizations are
    re-discovering the benefits of DC power: <https://en.wikipedia.org/wiki/High-voltage_direct_current> <https://oca.dc.gov/page/dcplug>
    such as no electromagnetic radiation.


    [1] The commodity wall outlets worked as long as I didn't plug/unplug
    the power cord while DC current was flowing. If I forgot, the current
    would arc weld the power plug to the receptacle. Running AC wall
    switches on DC had the same problem. DC connectors and switches were
    too expensive, so I gave up.

    --
    Jeff Liebermann jeffl@cruzio.com
    PO Box 272 http://www.LearnByDestroying.com
    Ben Lomond CA 95005-0272
    Skype: JeffLiebermann AE6KS 831-336-2558

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Wond@21:1/5 to Tim R on Fri Jun 3 15:25:46 2022
    On Thu, 02 Jun 2022 09:36:52 -0700, Tim R wrote:

    On Thursday, June 2, 2022 at 12:00:52 PM UTC-4, Jeff Liebermann wrote:

    If you purchased a junk EMF meter like this:
    <https://www.ebay.com/itm/363819859401>
    to find ghosts or determine if something might fry your brain, your
    brain is already fried. I have to confess that I bought one of these
    and found it useful for finding 60 Hz power line radiation but not much
    else. The sensitivity decreases rapidly with increasing RF frequency.


    I won't claim a fresh brain but the advertising hype on these products
    did peg my BS meter.

    On the other hand, at about $20 for some of the cheapies, would they be useful to avoid hitting a power line drilling through a wall or digging
    in the garden? You mentioned 60 Hz power line radiation.

    At the simple end, a Field Strength Meter- antenna, diode, meter; at 60Hz
    you'd need a big antenna, probably a coil.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From bilou@21:1/5 to Jeff Liebermann on Fri Jun 3 18:29:42 2022
    On 03/06/2022 17:33, Jeff Liebermann wrote:
    Fortunately, some organizations are
    re-discovering the benefits of DC power: <https://en.wikipedia.org/wiki/High-voltage_direct_current> <https://oca.dc.gov/page/dcplug>
    such as no electromagnetic radiation.

    On your second link it seems that DC stands for "district of Colombia" :-)

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Peter W.@21:1/5 to All on Fri Jun 3 10:04:36 2022
    Jeff:

    Either you have a rare sense of humor, or you are genuinely certifiable - or, hopefully, both.

    Peter Wieck
    Melrose Park, PA

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From danny burstein@21:1/5 to Jeff Liebermann on Fri Jun 3 22:50:53 2022
    In <gu9k9h5s2dar7i7h53496dfoj195ciu7l1@4ax.com> Jeff Liebermann <jeffl@cruzio.com> writes:

    [snip]

    Hardly. I prefer my power delivered as DC as Edison and the other
    patriarchs of power transmission intended it. For a time (early
    1970's), I had wall outlets that delivered 12V DC[1].

    Parts of NYC had DC utility power as late as the 1990's. While Con Ed
    stopped new hookups 1960ish, they kept the legacy wiring live
    a lot longer.

    My 6 story apartment building with 28 apartments had regular AC,
    but _ALSO_ had DC coming in for the elevator (a pretty common
    situation) and ... had an "unmetered" (flat rate) separate low current
    feed dedicated for the fire alarm.

    A friend of mine lived in a similar apartment building
    on 110th and Columbus Ave 1975ish, and believe it or not...
    the rooms there had standard outlets, some of which
    provided, sit down for this... 120V **DC**. Yes, identical.

    We figured it was cheaper for the landlord to pay off the
    building inspectors than to rewire...

    Note that since we're talking 1975 (and earlier),
    people had many appliances (basically incandescent
    lamps) which would, indeed, work ok. But don't
    plug in your record player.

    would arc weld the power plug to the receptacle. Running AC wall
    switches on DC had the same problem. DC connectors and switches were
    too expensive, so I gave up.

    Would the liquid mercury based wall swiches (remember them?) have
    worked ok?

    --
    _____________________________________________________
    Knowledge may be power, but communications is the key
    dannyb@panix.com
    [to foil spammers, my address has been double rot-13 encoded]

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Jeff Liebermann@21:1/5 to bilou on Fri Jun 3 22:04:50 2022
    On Fri, 3 Jun 2022 18:29:42 +0200, bilou <bilou@sfr.fr> wrote:

    On 03/06/2022 17:33, Jeff Liebermann wrote:
    Fortunately, some organizations are
    re-discovering the benefits of DC power:
    <https://en.wikipedia.org/wiki/High-voltage_direct_current>
    <https://oca.dc.gov/page/dcplug>
    such as no electromagnetic radiation.

    On your second link it seems that DC stands for "district of Colombia" :-)

    You're right. I screwed up. I thought they were installing an
    underground DC power line. Sorry.

    --
    Jeff Liebermann jeffl@cruzio.com
    PO Box 272 http://www.LearnByDestroying.com
    Ben Lomond CA 95005-0272
    Skype: JeffLiebermann AE6KS 831-336-2558

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Jeff Liebermann@21:1/5 to dannyb@panix.com on Fri Jun 3 22:29:56 2022
    On Fri, 3 Jun 2022 22:50:53 -0000 (UTC), danny burstein
    <dannyb@panix.com> wrote:

    In <gu9k9h5s2dar7i7h53496dfoj195ciu7l1@4ax.com> Jeff Liebermann <jeffl@cruzio.com> writes:

    [snip]

    Hardly. I prefer my power delivered as DC as Edison and the other >>patriarchs of power transmission intended it. For a time (early
    1970's), I had wall outlets that delivered 12V DC[1].

    Parts of NYC had DC utility power as late as the 1990's. While Con Ed >stopped new hookups 1960ish, they kept the legacy wiring live
    a lot longer.

    My 6 story apartment building with 28 apartments had regular AC,
    but _ALSO_ had DC coming in for the elevator (a pretty common
    situation) and ... had an "unmetered" (flat rate) separate low current
    feed dedicated for the fire alarm.

    A friend of mine lived in a similar apartment building
    on 110th and Columbus Ave 1975ish, and believe it or not...
    the rooms there had standard outlets, some of which
    provided, sit down for this... 120V **DC**. Yes, identical.

    We figured it was cheaper for the landlord to pay off the
    building inspectors than to rewire...

    Note that since we're talking 1975 (and earlier),
    people had many appliances (basically incandescent
    lamps) which would, indeed, work ok. But don't
    plug in your record player.

    Amazing. I would have thought that 120V DC would have disappeared
    long ago. I did try 120VDC on my house electrical system to see what
    would happen. It was similar to the 12VDC arcing and contact welding
    that I experiences with 12VDC. I also got a few shocks. 120VDC was
    quite different from a 120VAC shock. I think I may have pulled some
    ligaments or tendons from the rapid muscle contraction.

    would arc weld the power plug to the receptacle. Running AC wall
    switches on DC had the same problem. DC connectors and switches were
    too expensive, so I gave up.

    Would the liquid mercury based wall swiches (remember them?) have
    worked ok?

    I don't know. I didn't have any mercury switches and none of the
    stores had them for sale. I would guess(tm) that the major problem
    was the glass bulb exploding from something that produces hot gases
    from the arcing. No oxygen, therefore no combustion or burning. With
    just mercury and some kind of contacts, there's nothing that can burn,
    so I guess it might be safe. However, I would be worried if vaporized
    mercury could sustain an arc across the contacts, which would not be a
    good thing. Probably a bad idea.

    I thought that mercury had been banned in consumer products in the
    1960's, but now I find that it wasn't until 2001 that California
    finally banned mercury switches and thermostats:
    "DTSC SB 633: California’s Mercury Reduction Act of 2001" <https://dtsc.ca.gov/publications-index/mercury-publications/>

    --
    Jeff Liebermann jeffl@cruzio.com
    PO Box 272 http://www.LearnByDestroying.com
    Ben Lomond CA 95005-0272
    Skype: JeffLiebermann AE6KS 831-336-2558

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From KenW@21:1/5 to dannyb@panix.com on Tue Jun 7 11:36:41 2022
    On Fri, 3 Jun 2022 22:50:53 -0000 (UTC), danny burstein
    <dannyb@panix.com> wrote:

    In <gu9k9h5s2dar7i7h53496dfoj195ciu7l1@4ax.com> Jeff Liebermann <jeffl@cruzio.com> writes:

    [snip]

    Hardly. I prefer my power delivered as DC as Edison and the other >>patriarchs of power transmission intended it. For a time (early
    1970's), I had wall outlets that delivered 12V DC[1].

    Parts of NYC had DC utility power as late as the 1990's. While Con Ed >stopped new hookups 1960ish, they kept the legacy wiring live
    a lot longer.

    My 6 story apartment building with 28 apartments had regular AC,
    but _ALSO_ had DC coming in for the elevator (a pretty common
    situation) and ... had an "unmetered" (flat rate) separate low current
    feed dedicated for the fire alarm.

    A friend of mine lived in a similar apartment building
    on 110th and Columbus Ave 1975ish, and believe it or not...
    the rooms there had standard outlets, some of which
    provided, sit down for this... 120V **DC**. Yes, identical.

    We figured it was cheaper for the landlord to pay off the
    building inspectors than to rewire...

    Note that since we're talking 1975 (and earlier),
    people had many appliances (basically incandescent
    lamps) which would, indeed, work ok. But don't
    plug in your record player.

    would arc weld the power plug to the receptacle. Running AC wall
    switches on DC had the same problem. DC connectors and switches were
    too expensive, so I gave up.

    Would the liquid mercury based wall swiches (remember them?) have
    worked ok?

    The phone company in NYC had 105v 20cps for ring tone sent to feeds at
    least till 1973 when I quit. Probably for old switchboards and pbx's.
    I got zapped a few times in backyards testing phone troubles. IT WAS
    HOT !!


    KenW

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)