GSK makes aspirin caffeine paracetemol tablets. And so what?????!!!!!
coat them with active placebo flavor
medicine that tastes bad might be thought to be stronger, but is there another taste, that tastes good, that makes people think medicine is strong? Perhaps spearmint, or a modified spearamint. Horehound? Sen-sen (ammoniated licorice)
if its 1% better and 1 billion pills are used then that’s something.
blue line on the pill divider indention?
or how about pan am building spread lines on the pill; very aerodynamic! looks effective.
call it “active impression” rather than “placebo”
I read placebos work even when you know they are placebos!
Excedrin:work 80 mg caffeine
Excedrin:home naproxen with time release caffeine after a burst to do the immediate headache relief. 12 hour all day caffeinated relief. slightly peps you up all day.
possibly that non caffeine multimethyxanthine (diet pill non trimethylxanthine caffeine like chemical) or synephrine or the active metabolite of caffeine paraxanthine (dimethylxanthine; potency bar equal that of caffeine) at weight loss supplements; test
it to see if it is more effective than aspirin with caffeine.
Excedrin XP (paraxanthine)
Green tea caffeine at excedrin
if liposomes work in the stomach then liposomal aspirin with liposomal caffeine to cause more rapid absorption.
liquid capsule excedrin with a difference. gelatin is made of protein; different molecular weights of the protein jello might have different dissolubility, making absorption more rapid.
gsk
sublingual sticker perhaps with surgical glue on it like contact lens you place under tongue
superhydrophobic surface thing mini pad
electric aspirin/skin jewel tcds
stimulating the vagus nerve
immune system thus skin irritation atopic dermatitis AND relief from flu symptoms other immune response symptoms; if you do it right does the flu or cold get cured faster?
modify urge to eat (43%) (google or pubmed)
slimming electric skin jewels
two versions two jewels with battery dc between them; an elegant wire like wire wrap wire and eentsy led ufo sized battery.
mandible or throat side placement
use light blue michael reaction henna dot so people know where to put it. phone app shows where first time.
TMS or rather TCVS possible with popped collar magnet
should I get a couch?
measure the value of receiving phone calls, then exceed it.
replace the socialization of work with other socialization
too few phone workers causes voicemail and delay music. It could drive people to online opportunities instead.
SSI funds are extracted from others. Only about half of those others like the idea.
Ive got inventors crevice.
so Im supposed to think of a water treatment technology and a new medical technology.
amazing fluid for waterpiks
floss or springy floss coated with gunk that gets caught between teeth. This gunk is anticavity though, and tastes good, leaving the spaces between your teeth pleasantly flavored; if it is antibacterial perhaps a person could floss half as often
like halogenating or deuterating all the drug molecules then screening them for effect how about just rotating them about l it hs been done…
multicolor bubble bubble gum This one is hard to pull off, but it is possible color crystals in the gum could do it.
a fridge deodorant that is not baking soda; look at the proliferation of cat litters, including the crystalline kind these are high material volume yet premium products ion optimized clay? (like making activated charcoal) ion optimized clay could also be
hypercatlitter
quora: what happens to MTBI ***J when messy people raise them and never tell them to clean their room? Has this happened to you?
Tooth whitening lasers could lasers etch diffraction based blue orwaveguide optics blue onto actual teeth or a plastic coating on teeth? compare PRK popularity.
research improving the fuel (energy) efficiency at oil refineries
the combined output of all small refineries was slightly greater than all of Texas.
hydrogen growth supporting desulfurization is growing
is it possible to exceed vacuum distillation efficiency with clingy gas that pulls no? because of pvnrt n and possibly r components microdropets with high vacuum resistance could pull (van der walls) but not gas
Side processes that are used to condition inputs and/or produce hydrogen or by-products include crude conditioning (e.g., desalting)
The principal energy consuming processes in refineries, in order of overall energy consumption in the United States, are the crude (or atmospheric) distillation and vacuum distillation units, hydrotreaters, reformer, alkylate production, catalytic
crackers and hydrocrackers
lpg, light vapors, and gas are the energy sources of refineries
coking is the source of refinery fuel oil, which likely is sort of near a third a source than refinery gas
desalting: The salt is washed from the crude with water (3-10% at temperatures of 200-300°F (90-150oC)). The salts are then dissolved in the water and an electric current is used to separate the water from the oil. This process also removes suspended
solids. Desalting can help to minimize fouling downstream, thereby reducing energy costs. The different desalting processes vary in the amount of water used and the electric field used for separation of the oil and water. The efficiency of desalting is
influenced by the pH, gravity, viscosity, and salt content of the crude oil, and by the volume of water used in the process. Electricity consumption from desalting varies between 0.01 and 0.02 kWh/barrel of crude oil (IPPC, 2002).
nano electrode or activated charcoal as activated carbon high surface area electrodes; oil water mix percentage could vary with this along with electrode surface area; resistance heating contributes to process energy temperatures possibly
Crude Distillation Unit (CDU) uses most refinery energy; Energy efficiency opportunities include improved heat recovery and heat exchange (process integration) and improved separation efficiencies.
anything that turns fuel oil into other products makes money: The heaviest fraction is fuel oil, which has the lowest economic value of the crude oil products.
Hydrogen is generated from natural gas and steam over a hot catalyst bed, similar to the processes used to make hydrogen for ammonia
could cheap concentration of deuterium affect hydrogen production very iffy
At the hydrogen cracker (hydrocracker) reactions are carried out at a temperature of 500-750°F (290-400oC) and increased pressures of 8.3 to 13.8 Bar could squeezing a tube be more efficient than heating it?
produce anticancer asphalt modifying this process (not an energy saver) Bitumen Blower Unit (BBU). Heavy fuel oil of some heavy crude oil is blown with hot air to produce bitumen or asphalt. would steam, rather than air, with nitrogen producer simpler
asphalt, that is less carcinogenic?
reread hydrotreaters (hydrocracking), at second highest energy use after cdu. there is a data oddity though, the VDU uses about half as much energy as the CDU.
1% of 5% of 2% * 20 yr equipment life, maybe, reduced coke deposition on the furnace tubes
better tube coatings diamond would do it, maybe.
The petroleum refining industry spent almost $9 billion on energy purchases in 2010
thus as a ten % improvement (1% of value added through refining, or a tiny part of the $555 billion annual value of the product, would be extreme to invent; getting people to give 1 billion to charity would be better; how to get the Chinese to give to
charity? like previous index fund savings account with 1% to charity check off box at arms or phones.
This figure also shows that the main fuels used in the refinery are refinery gas (i.e., still gas), natural gas and coke
halfbakery: many petroleum refining reactors and hydrogen producers use gravity fed reactors; could a lengthy reactor, spinning from the middle, have two concentration zones; above gravity effect, and one very large light zone in the middle with purer
material or enhanced sized product (fractionation) steps, does increasing the size of the gaseous area or the spacing of elements in a fluidized bed reactor improve things?; aside from the energy of spinning (artificial G) the main thing is the gasketing
on the center feed tube which must rotate. Is it possible? Would tighter fractionation of wider areas of uncontaminated catalyst be value effective? This would be a completely new approach compared with unidirectional flow or countercurrent mode. Could
this also be used for non petroleum reactors as a “centrifuge reactor” Is a shaken tube capable of concentration a little like a centrifuge tube? Fill->shake->fill cycles could be used possibly with less complex gasketing or (maybe) less energy use.
from: “In FBR the liquid and gas flow co-currently downward through the catalytic bed, which has unfavorable hydrogen and hydrogen sulfide concentration profiles over the reactor (i.e., a high H2S concentration at the reactor outlet)”
http://what-
when-how.com/petroleum-refining/the-hydrotreating-process-part-1/
Could a cheaper than catalyst H2S or fancy mercaptan absorbing non-catalyst layer be placed above the catalysts with sophisticated placement nozzles/machinery? a different way to do:“One more application of this approach considers the use of a stacked
bed of two catalysts, in which the final deep HDS and/or final deep hydrogenation step is performed at low H2S and high H2 partial pressures” supporting this is “For such cases, proper bed grading can be used “ which suggests the finesse to put
cheaper non catalysts that are better at glomming mercapatans from might exist.
lets say naphtha has 10% ROI, and oil (of some kind) has 7% ROI a process or product that causes the conversion of an oil reactor to a naphtha reactor twice as fast could cause ROI to increase some amount, maybe (or maybe not) to 8.5% averaged. So, what
are the cheapest things to change in an oil refinery?
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)