Later we'll talk about layers... Can you believe such a powerful tool had documentation that said "don't use layers and be happy?"
Puckdropper
On 1/17/2023 12:06 AM, Puckdropper wrote:
Follow Me seemed to be a bit of a weird tool, I never was quite sure what
I was going to get. I think I get it now, and it's awesome for adding
profiles around things. One of the places it excels is in figuring out
how to do corners, so you're not spending lots of time manually mitering
a corner.
So there's two ways to make friends with "Follow me", selecting line by
line and selecting all at once. Selecting all at once is my preferred
method, it almost always seems to work.
First, draw your profile on one of the lines you'll be extruding on. It
should be a single face and make contact with the line. It should be
perpendicular to the line.
For the "line by line" method, select the follow me tool and select the
face to extrude, then move it to select the line you want to extrude on.
Carefully navigate to the next line and keep going until your extrusion
is done.
For the "all at once" method, select the lines you want to extrude on,
then select the follow me tool, and finally click the face you want to
extrude. It will then extrude along that path.
Note: Your face and the lines you select must be on the same component.
If you draw a face outside a component and try to extrude along the lines
of a component it will not work.
Later we'll talk about layers... Can you believe such a powerful tool had
documentation that said "don't use layers and be happy?"
Puckdropper
I use follow me so seldom that I have to refresh myself with a quicky
YouTube video that Sketchup puts out. Between 1 and 3 minutes in, the basics are covered.
FWIW "Layers" have been renamed "Tags" on the past 1 or 2 updates, maybe more.
It is a good habit to not use "Layers/Tags" for design drawing. Use
the Layers/Tags for segregating work that you do not want to always
show. Basically, draw/design on the default layer and when complete assign it to another Layer/Tag, if you want.
I like the option to add a "Tag Folder".
I am designing kitchen cabinets and want all cabinets to be in the same drawing. Each individual cabinet, when complete, is on a different Layer/Tag. I can look at any number of cabinets or just one particular cabinet by turning their respective Layer/Tags on or off.
BE CAREFUL to not draw on two different Layers/Tags at the same time if
both are visible. Your editing will be added to only the currently selected Layer/Tag.
And additional Tag Folder lets you place specific extra layers under the hierarchy of a specific tag. For example I have 5 cabinets each on their specific Layer/Tag. Adding a Tag Folder allows you to put each cabinet layer in those individual folders along with separate Layer/Tags
for dimensions unique to the cabinet in that tag folder.
This allows me to have the ability to turn every thing in that Tag
"Folder" on or off with a single click.
Additionally Adding a scene for each cabinet with the appropriate Tag
Folder selected allows you to turn off every thing that is not assigned
to that Layer/Tag and zooms you to that particular cabinet for viewing
or editing.
Follow Me seemed to be a bit of a weird tool, I never was quite sure what
I was going to get. I think I get it now, and it's awesome for adding profiles around things. One of the places it excels is in figuring out
how to do corners, so you're not spending lots of time manually mitering
a corner.
So there's two ways to make friends with "Follow me", selecting line by
line and selecting all at once. Selecting all at once is my preferred method, it almost always seems to work.
First, draw your profile on one of the lines you'll be extruding on. It should be a single face and make contact with the line. It should be perpendicular to the line.
For the "line by line" method, select the follow me tool and select the
face to extrude, then move it to select the line you want to extrude on. Carefully navigate to the next line and keep going until your extrusion
is done.
For the "all at once" method, select the lines you want to extrude on,
then select the follow me tool, and finally click the face you want to extrude. It will then extrude along that path.
Note: Your face and the lines you select must be on the same component.
If you draw a face outside a component and try to extrude along the lines
of a component it will not work.
Later we'll talk about layers... Can you believe such a powerful tool had documentation that said "don't use layers and be happy?"
Puckdropper
On 1/17/2023 12:06 AM, Puckdropper wrote:
Follow Me seemed to be a bit of a weird tool, I never was quite sure
what I was going to get. I think I get it now, and it's awesome for
adding profiles around things. One of the places it excels is in
figuring out how to do corners, so you're not spending lots of time
manually mitering a corner.
So there's two ways to make friends with "Follow me", selecting line
by line and selecting all at once. Selecting all at once is my
preferred method, it almost always seems to work.
First, draw your profile on one of the lines you'll be extruding on.
It should be a single face and make contact with the line. It should
be perpendicular to the line.
For the "line by line" method, select the follow me tool and select
the face to extrude, then move it to select the line you want to
extrude on. Carefully navigate to the next line and keep going until
your extrusion is done.
For the "all at once" method, select the lines you want to extrude
on, then select the follow me tool, and finally click the face you
want to extrude. It will then extrude along that path.
Note: Your face and the lines you select must be on the same
component. If you draw a face outside a component and try to extrude
along the lines of a component it will not work.
Later we'll talk about layers... Can you believe such a powerful tool
had documentation that said "don't use layers and be happy?"
Puckdropper
I use follow me so seldom that I have to refresh myself with a quicky
YouTube video that Sketchup puts out. Between 1 and 3 minutes in, the
basics are covered.
FWIW "Layers" have been renamed "Tags" on the past 1 or 2 updates,
maybe more.
It is a good habit to not use "Layers/Tags" for design drawing. Use
the Layers/Tags for segregating work that you do not want to always
show. Basically, draw/design on the default layer and when complete
assign it to another Layer/Tag, if you want.
I like the option to add a "Tag Folder".
I am designing kitchen cabinets and want all cabinets to be in the
same drawing. Each individual cabinet, when complete, is on a
different Layer/Tag. I can look at any number of cabinets or just
one particular cabinet by turning their respective Layer/Tags on or
off.
BE CAREFUL to not draw on two different Layers/Tags at the same time
if both are visible. Your editing will be added to only the
currently selected Layer/Tag.
And additional Tag Folder lets you place specific extra layers under
the hierarchy of a specific tag. For example I have 5 cabinets each
on their specific Layer/Tag. Adding a Tag Folder allows you to put
each cabinet layer in those individual folders along with separate
Layer/Tags for dimensions unique to the cabinet in that tag folder.
This allows me to have the ability to turn every thing in that Tag
"Folder" on or off with a single click.
Additionally Adding a scene for each cabinet with the appropriate Tag
Folder selected allows you to turn off every thing that is not
assigned to that Layer/Tag and zooms you to that particular cabinet
for viewing or editing.
Leon <lcb11211@swbelldotnet> wrote in news:VRCdnQkJ3OsuV1v-nZ2dnZfqn_ednZ2d@giganews.com:
On 1/17/2023 12:06 AM, Puckdropper wrote:
Follow Me seemed to be a bit of a weird tool, I never was quite sure
what I was going to get. I think I get it now, and it's awesome for
adding profiles around things. One of the places it excels is in
figuring out how to do corners, so you're not spending lots of time
manually mitering a corner.
So there's two ways to make friends with "Follow me", selecting line
by line and selecting all at once. Selecting all at once is my
preferred method, it almost always seems to work.
First, draw your profile on one of the lines you'll be extruding on.
It should be a single face and make contact with the line. It should
be perpendicular to the line.
For the "line by line" method, select the follow me tool and select
the face to extrude, then move it to select the line you want to
extrude on. Carefully navigate to the next line and keep going until
your extrusion is done.
For the "all at once" method, select the lines you want to extrude
on, then select the follow me tool, and finally click the face you
want to extrude. It will then extrude along that path.
Note: Your face and the lines you select must be on the same
component. If you draw a face outside a component and try to extrude
along the lines of a component it will not work.
Later we'll talk about layers... Can you believe such a powerful tool
had documentation that said "don't use layers and be happy?"
Puckdropper
I use follow me so seldom that I have to refresh myself with a quicky
YouTube video that Sketchup puts out. Between 1 and 3 minutes in, the
basics are covered.
That's why it took me so long to make friends with it. It's not
something you need often but can be really handy when you do.
FWIW "Layers" have been renamed "Tags" on the past 1 or 2 updates,
maybe more.
It is a good habit to not use "Layers/Tags" for design drawing. Use
the Layers/Tags for segregating work that you do not want to always
show. Basically, draw/design on the default layer and when complete
assign it to another Layer/Tag, if you want.
All geometry goes on Layer 0. No geometry should ever be on a layer. Components and groups go on layers, geometry goes on layer 0.
I like the option to add a "Tag Folder".
I am designing kitchen cabinets and want all cabinets to be in the
same drawing. Each individual cabinet, when complete, is on a
different Layer/Tag. I can look at any number of cabinets or just
one particular cabinet by turning their respective Layer/Tags on or
off.
BE CAREFUL to not draw on two different Layers/Tags at the same time
if both are visible. Your editing will be added to only the
currently selected Layer/Tag.
And additional Tag Folder lets you place specific extra layers under
the hierarchy of a specific tag. For example I have 5 cabinets each
on their specific Layer/Tag. Adding a Tag Folder allows you to put
each cabinet layer in those individual folders along with separate
Layer/Tags for dimensions unique to the cabinet in that tag folder.
This allows me to have the ability to turn every thing in that Tag
"Folder" on or off with a single click.
Additionally Adding a scene for each cabinet with the appropriate Tag
Folder selected allows you to turn off every thing that is not
assigned to that Layer/Tag and zooms you to that particular cabinet
for viewing or editing.
I'm stuck on Sketchup Make 2017 because of poor business decisions.
Software as a service, renting software, programs running exclusively online... It's just not a world I can trust.
Puckdropper
On 1/18/2023 4:50 AM, Puckdropper wrote:
Leon <lcb11211@swbelldotnet> wrote in
news:VRCdnQkJ3OsuV1v-nZ2dnZfqn_ednZ2d@giganews.com:
On 1/17/2023 12:06 AM, Puckdropper wrote:
Follow Me seemed to be a bit of a weird tool, I never was quite sure
what I was going to get. I think I get it now, and it's awesome for
adding profiles around things. One of the places it excels is in
figuring out how to do corners, so you're not spending lots of time
manually mitering a corner.
So there's two ways to make friends with "Follow me", selecting line
by line and selecting all at once. Selecting all at once is my
preferred method, it almost always seems to work.
First, draw your profile on one of the lines you'll be extruding on.
It should be a single face and make contact with the line. It should
be perpendicular to the line.
For the "line by line" method, select the follow me tool and select
the face to extrude, then move it to select the line you want to
extrude on. Carefully navigate to the next line and keep going until
your extrusion is done.
For the "all at once" method, select the lines you want to extrude
on, then select the follow me tool, and finally click the face you
want to extrude. It will then extrude along that path.
Note: Your face and the lines you select must be on the same
component. If you draw a face outside a component and try to extrude
along the lines of a component it will not work.
Later we'll talk about layers... Can you believe such a powerful tool
had documentation that said "don't use layers and be happy?"
Puckdropper
I use follow me so seldom that I have to refresh myself with a quicky
YouTube video that Sketchup puts out. Between 1 and 3 minutes in, the
basics are covered.
That's why it took me so long to make friends with it. It's not
something you need often but can be really handy when you do.
FWIW "Layers" have been renamed "Tags" on the past 1 or 2 updates,
maybe more.
It is a good habit to not use "Layers/Tags" for design drawing. Use
the Layers/Tags for segregating work that you do not want to always
show. Basically, draw/design on the default layer and when complete
assign it to another Layer/Tag, if you want.
All geometry goes on Layer 0. No geometry should ever be on a layer.
Components and groups go on layers, geometry goes on layer 0.
I like the option to add a "Tag Folder".
I am designing kitchen cabinets and want all cabinets to be in the
same drawing. Each individual cabinet, when complete, is on a
different Layer/Tag. I can look at any number of cabinets or just
one particular cabinet by turning their respective Layer/Tags on or
off.
BE CAREFUL to not draw on two different Layers/Tags at the same time
if both are visible. Your editing will be added to only the
currently selected Layer/Tag.
And additional Tag Folder lets you place specific extra layers under
the hierarchy of a specific tag. For example I have 5 cabinets each
on their specific Layer/Tag. Adding a Tag Folder allows you to put
each cabinet layer in those individual folders along with separate
Layer/Tags for dimensions unique to the cabinet in that tag folder.
This allows me to have the ability to turn every thing in that Tag
"Folder" on or off with a single click.
Additionally Adding a scene for each cabinet with the appropriate Tag
Folder selected allows you to turn off every thing that is not
assigned to that Layer/Tag and zooms you to that particular cabinet
for viewing or editing.
I'm stuck on Sketchup Make 2017 because of poor business decisions.
Software as a service, renting software, programs running exclusively
online... It's just not a world I can trust.
Puckdropper
Puckdropper, I may have a copy of the free install program from when
SketchUp was owned by Google, before it was sold to Trimble. I believe
it is from around 2008. I last installed it on Windows 7, but SU still
runs on Windows 10 after my upgrade. Let me know if you are interested.
Leon <lcb11211@swbelldotnet> wrote in >news:VRCdnQkJ3OsuV1v-nZ2dnZfqn_ednZ2d@giganews.com:
On 1/17/2023 12:06 AM, Puckdropper wrote:
Follow Me seemed to be a bit of a weird tool, I never was quite sure
what I was going to get. I think I get it now, and it's awesome for
adding profiles around things. One of the places it excels is in
figuring out how to do corners, so you're not spending lots of time
manually mitering a corner.
So there's two ways to make friends with "Follow me", selecting line
by line and selecting all at once. Selecting all at once is my
preferred method, it almost always seems to work.
First, draw your profile on one of the lines you'll be extruding on.
It should be a single face and make contact with the line. It should
be perpendicular to the line.
For the "line by line" method, select the follow me tool and select
the face to extrude, then move it to select the line you want to
extrude on. Carefully navigate to the next line and keep going until
your extrusion is done.
For the "all at once" method, select the lines you want to extrude
on, then select the follow me tool, and finally click the face you
want to extrude. It will then extrude along that path.
Note: Your face and the lines you select must be on the same
component. If you draw a face outside a component and try to extrude
along the lines of a component it will not work.
Later we'll talk about layers... Can you believe such a powerful tool
had documentation that said "don't use layers and be happy?"
Puckdropper
I use follow me so seldom that I have to refresh myself with a quicky
YouTube video that Sketchup puts out. Between 1 and 3 minutes in, the
basics are covered.
That's why it took me so long to make friends with it. It's not
something you need often but can be really handy when you do.
FWIW "Layers" have been renamed "Tags" on the past 1 or 2 updates,
maybe more.
It is a good habit to not use "Layers/Tags" for design drawing. Use
the Layers/Tags for segregating work that you do not want to always
show. Basically, draw/design on the default layer and when complete
assign it to another Layer/Tag, if you want.
All geometry goes on Layer 0. No geometry should ever be on a layer. >Components and groups go on layers, geometry goes on layer 0.
I like the option to add a "Tag Folder".
I am designing kitchen cabinets and want all cabinets to be in the
same drawing. Each individual cabinet, when complete, is on a
different Layer/Tag. I can look at any number of cabinets or just
one particular cabinet by turning their respective Layer/Tags on or
off.
BE CAREFUL to not draw on two different Layers/Tags at the same time
if both are visible. Your editing will be added to only the
currently selected Layer/Tag.
And additional Tag Folder lets you place specific extra layers under
the hierarchy of a specific tag. For example I have 5 cabinets each
on their specific Layer/Tag. Adding a Tag Folder allows you to put
each cabinet layer in those individual folders along with separate
Layer/Tags for dimensions unique to the cabinet in that tag folder.
This allows me to have the ability to turn every thing in that Tag
"Folder" on or off with a single click.
Additionally Adding a scene for each cabinet with the appropriate Tag
Folder selected allows you to turn off every thing that is not
assigned to that Layer/Tag and zooms you to that particular cabinet
for viewing or editing.
I'm stuck on Sketchup Make 2017 because of poor business decisions.
Software as a service, renting software, programs running exclusively >online... It's just not a world I can trust.
On Wed, 18 Jan 2023 18:58:52 -0500, Bill <nonegiven@att.net> wrote:
On 1/18/2023 4:50 AM, Puckdropper wrote:The 2017 version still works. I've been using it since, well, 2017.
Leon <lcb11211@swbelldotnet> wrote in
news:VRCdnQkJ3OsuV1v-nZ2dnZfqn_ednZ2d@giganews.com:
On 1/17/2023 12:06 AM, Puckdropper wrote:
Follow Me seemed to be a bit of a weird tool, I never was quite sure >>>>> what I was going to get. I think I get it now, and it's awesome for >>>>> adding profiles around things. One of the places it excels is in
figuring out how to do corners, so you're not spending lots of time
manually mitering a corner.
So there's two ways to make friends with "Follow me", selecting line >>>>> by line and selecting all at once. Selecting all at once is my
preferred method, it almost always seems to work.
First, draw your profile on one of the lines you'll be extruding on. >>>>> It should be a single face and make contact with the line. It should >>>>> be perpendicular to the line.
For the "line by line" method, select the follow me tool and select
the face to extrude, then move it to select the line you want to
extrude on. Carefully navigate to the next line and keep going until >>>>> your extrusion is done.
For the "all at once" method, select the lines you want to extrude
on, then select the follow me tool, and finally click the face you
want to extrude. It will then extrude along that path.
Note: Your face and the lines you select must be on the same
component. If you draw a face outside a component and try to extrude >>>>> along the lines of a component it will not work.
Later we'll talk about layers... Can you believe such a powerful tool >>>>> had documentation that said "don't use layers and be happy?"
Puckdropper
I use follow me so seldom that I have to refresh myself with a quicky
YouTube video that Sketchup puts out. Between 1 and 3 minutes in, the >>>> basics are covered.
That's why it took me so long to make friends with it. It's not
something you need often but can be really handy when you do.
FWIW "Layers" have been renamed "Tags" on the past 1 or 2 updates,
maybe more.
It is a good habit to not use "Layers/Tags" for design drawing. Use
the Layers/Tags for segregating work that you do not want to always
show. Basically, draw/design on the default layer and when complete
assign it to another Layer/Tag, if you want.
All geometry goes on Layer 0. No geometry should ever be on a layer.
Components and groups go on layers, geometry goes on layer 0.
I like the option to add a "Tag Folder".
I am designing kitchen cabinets and want all cabinets to be in the
same drawing. Each individual cabinet, when complete, is on a
different Layer/Tag. I can look at any number of cabinets or just
one particular cabinet by turning their respective Layer/Tags on or
off.
BE CAREFUL to not draw on two different Layers/Tags at the same time
if both are visible. Your editing will be added to only the
currently selected Layer/Tag.
And additional Tag Folder lets you place specific extra layers under
the hierarchy of a specific tag. For example I have 5 cabinets each
on their specific Layer/Tag. Adding a Tag Folder allows you to put
each cabinet layer in those individual folders along with separate
Layer/Tags for dimensions unique to the cabinet in that tag folder.
This allows me to have the ability to turn every thing in that Tag
"Folder" on or off with a single click.
Additionally Adding a scene for each cabinet with the appropriate Tag
Folder selected allows you to turn off every thing that is not
assigned to that Layer/Tag and zooms you to that particular cabinet
for viewing or editing.
I'm stuck on Sketchup Make 2017 because of poor business decisions.
Software as a service, renting software, programs running exclusively
online... It's just not a world I can trust.
Puckdropper
Puckdropper, I may have a copy of the free install program from when
SketchUp was owned by Google, before it was sold to Trimble. I believe
it is from around 2008. I last installed it on Windows 7, but SU still
runs on Windows 10 after my upgrade. Let me know if you are interested.
On 1/18/2023 8:50 PM, krw@notreal.com wrote:
On Wed, 18 Jan 2023 18:58:52 -0500, Bill <nonegiven@att.net> wrote:
The 2017 version still works. I've been using it since, well, 2017.
Puckdropper, I may have a copy of the free install program from when
SketchUp was owned by Google, before it was sold to Trimble. I
believe it is from around 2008. I last installed it on Windows 7,
but SU still runs on Windows 10 after my upgrade. Let me know if you
are interested.
If its the Trimble version it works with more handicaps than the free
Google version. The last time I tried the free version it didn't
support "labels", for instance, which were essential to what I wanted
to do.
On Wed, 18 Jan 2023 09:50:39 GMT, Puckdropper <puckdropper@yahoo.com>
wrote:
I'm stuck on Sketchup Make 2017 because of poor business decisions. >>Software as a service, renting software, programs running exclusively >>online... It's just not a world I can trust.
I'm the same, though it's getting harder and harder to do. I just
"rented" Shaper Studio. I'm not all that happy about it but it wasn't
all that expensive.
Bill <nonegiven@att.net> wrote in news:XF3yL.61797$5S78.11823@fx48.iad:
On 1/18/2023 8:50 PM, krw@notreal.com wrote:
On Wed, 18 Jan 2023 18:58:52 -0500, Bill <nonegiven@att.net> wrote:
The 2017 version still works. I've been using it since, well, 2017.
Puckdropper, I may have a copy of the free install program from when
SketchUp was owned by Google, before it was sold to Trimble. I
believe it is from around 2008. I last installed it on Windows 7,
but SU still runs on Windows 10 after my upgrade. Let me know if you
are interested.
If its the Trimble version it works with more handicaps than the free
Google version. The last time I tried the free version it didn't
support "labels", for instance, which were essential to what I wanted
to do.
I appreciate the offer, I've got install files for Sketchup 8. I spent a long time on Sketchup 8 and finally moved to Sketchup 2017 for better
plugin support. The solid modeler (drawing) is pretty much the same, which sucks because it needs some fixes. (ROUND circles? What's that?)
Puckdropper
Leon <lcb11211@swbelldotnet> wrote in news:VRCdnQkJ3OsuV1v-nZ2dnZfqn_ednZ2d@giganews.com:
On 1/17/2023 12:06 AM, Puckdropper wrote:
Follow Me seemed to be a bit of a weird tool, I never was quite sure
what I was going to get. I think I get it now, and it's awesome for
adding profiles around things. One of the places it excels is in
figuring out how to do corners, so you're not spending lots of time
manually mitering a corner.
So there's two ways to make friends with "Follow me", selecting line
by line and selecting all at once. Selecting all at once is my
preferred method, it almost always seems to work.
First, draw your profile on one of the lines you'll be extruding on.
It should be a single face and make contact with the line. It should
be perpendicular to the line.
For the "line by line" method, select the follow me tool and select
the face to extrude, then move it to select the line you want to
extrude on. Carefully navigate to the next line and keep going until
your extrusion is done.
For the "all at once" method, select the lines you want to extrude
on, then select the follow me tool, and finally click the face you
want to extrude. It will then extrude along that path.
Note: Your face and the lines you select must be on the same
component. If you draw a face outside a component and try to extrude
along the lines of a component it will not work.
Later we'll talk about layers... Can you believe such a powerful tool
had documentation that said "don't use layers and be happy?"
Puckdropper
I use follow me so seldom that I have to refresh myself with a quicky
YouTube video that Sketchup puts out. Between 1 and 3 minutes in, the
basics are covered.
That's why it took me so long to make friends with it. It's not
something you need often but can be really handy when you do.
FWIW "Layers" have been renamed "Tags" on the past 1 or 2 updates,
maybe more.
It is a good habit to not use "Layers/Tags" for design drawing. Use
the Layers/Tags for segregating work that you do not want to always
show. Basically, draw/design on the default layer and when complete
assign it to another Layer/Tag, if you want.
All geometry goes on Layer 0. No geometry should ever be on a layer. Components and groups go on layers, geometry goes on layer 0.
I like the option to add a "Tag Folder".
I am designing kitchen cabinets and want all cabinets to be in the
same drawing. Each individual cabinet, when complete, is on a
different Layer/Tag. I can look at any number of cabinets or just
one particular cabinet by turning their respective Layer/Tags on or
off.
BE CAREFUL to not draw on two different Layers/Tags at the same time
if both are visible. Your editing will be added to only the
currently selected Layer/Tag.
And additional Tag Folder lets you place specific extra layers under
the hierarchy of a specific tag. For example I have 5 cabinets each
on their specific Layer/Tag. Adding a Tag Folder allows you to put
each cabinet layer in those individual folders along with separate
Layer/Tags for dimensions unique to the cabinet in that tag folder.
This allows me to have the ability to turn every thing in that Tag
"Folder" on or off with a single click.
Additionally Adding a scene for each cabinet with the appropriate Tag
Folder selected allows you to turn off every thing that is not
assigned to that Layer/Tag and zooms you to that particular cabinet
for viewing or editing.
I'm stuck on Sketchup Make 2017 because of poor business decisions.
Software as a service, renting software, programs running exclusively online... It's just not a world I can trust.
krw@notreal.com wrote in news:q18hsh5r4lf6b69mn8iqro37h3qrq722e2@4ax.com:
On Wed, 18 Jan 2023 09:50:39 GMT, Puckdropper <puckdropper@yahoo.com>
wrote:
I'm stuck on Sketchup Make 2017 because of poor business decisions.
Software as a service, renting software, programs running exclusively
online... It's just not a world I can trust.
I'm the same, though it's getting harder and harder to do. I just
"rented" Shaper Studio. I'm not all that happy about it but it wasn't
all that expensive.
On the front page, these guys say "Buy it once, own it forever." https://www.alibre.com/
I really need to see if it will do what I do, I'd like to reward those guys with some business for having sane licensing terms.
Puckdropper
On 1/18/2023 8:50 PM, krw@notreal.com wrote:
On Wed, 18 Jan 2023 18:58:52 -0500, Bill <nonegiven@att.net> wrote:
On 1/18/2023 4:50 AM, Puckdropper wrote:The 2017 version still works. I've been using it since, well, 2017.
Leon <lcb11211@swbelldotnet> wrote in
news:VRCdnQkJ3OsuV1v-nZ2dnZfqn_ednZ2d@giganews.com:
On 1/17/2023 12:06 AM, Puckdropper wrote:
Follow Me seemed to be a bit of a weird tool, I never was quite sure >>>>>> what I was going to get. I think I get it now, and it's awesome for >>>>>> adding profiles around things. One of the places it excels is in >>>>>> figuring out how to do corners, so you're not spending lots of time >>>>>> manually mitering a corner.
So there's two ways to make friends with "Follow me", selecting line >>>>>> by line and selecting all at once. Selecting all at once is my
preferred method, it almost always seems to work.
First, draw your profile on one of the lines you'll be extruding on. >>>>>> It should be a single face and make contact with the line. It should >>>>>> be perpendicular to the line.
For the "line by line" method, select the follow me tool and select >>>>>> the face to extrude, then move it to select the line you want to
extrude on. Carefully navigate to the next line and keep going until >>>>>> your extrusion is done.
For the "all at once" method, select the lines you want to extrude >>>>>> on, then select the follow me tool, and finally click the face you >>>>>> want to extrude. It will then extrude along that path.
Note: Your face and the lines you select must be on the same
component. If you draw a face outside a component and try to extrude >>>>>> along the lines of a component it will not work.
Later we'll talk about layers... Can you believe such a powerful tool >>>>>> had documentation that said "don't use layers and be happy?"
Puckdropper
I use follow me so seldom that I have to refresh myself with a quicky >>>>> YouTube video that Sketchup puts out. Between 1 and 3 minutes in, the >>>>> basics are covered.
That's why it took me so long to make friends with it. It's not
something you need often but can be really handy when you do.
FWIW "Layers" have been renamed "Tags" on the past 1 or 2 updates,
maybe more.
It is a good habit to not use "Layers/Tags" for design drawing. Use >>>>> the Layers/Tags for segregating work that you do not want to always
show. Basically, draw/design on the default layer and when complete >>>>> assign it to another Layer/Tag, if you want.
All geometry goes on Layer 0. No geometry should ever be on a layer. >>>> Components and groups go on layers, geometry goes on layer 0.
I like the option to add a "Tag Folder".
I am designing kitchen cabinets and want all cabinets to be in the
same drawing. Each individual cabinet, when complete, is on a
different Layer/Tag. I can look at any number of cabinets or just >>>>> one particular cabinet by turning their respective Layer/Tags on or
off.
BE CAREFUL to not draw on two different Layers/Tags at the same time >>>>> if both are visible. Your editing will be added to only the
currently selected Layer/Tag.
And additional Tag Folder lets you place specific extra layers under >>>>> the hierarchy of a specific tag. For example I have 5 cabinets each >>>>> on their specific Layer/Tag. Adding a Tag Folder allows you to put >>>>> each cabinet layer in those individual folders along with separate
Layer/Tags for dimensions unique to the cabinet in that tag folder.
This allows me to have the ability to turn every thing in that Tag
"Folder" on or off with a single click.
Additionally Adding a scene for each cabinet with the appropriate Tag >>>>> Folder selected allows you to turn off every thing that is not
assigned to that Layer/Tag and zooms you to that particular cabinet
for viewing or editing.
I'm stuck on Sketchup Make 2017 because of poor business decisions.
Software as a service, renting software, programs running exclusively
online... It's just not a world I can trust.
Puckdropper
Puckdropper, I may have a copy of the free install program from when
SketchUp was owned by Google, before it was sold to Trimble. I believe
it is from around 2008. I last installed it on Windows 7, but SU still
runs on Windows 10 after my upgrade. Let me know if you are interested.
If its the Trimble version it works with more handicaps than the free
Google version. The last time I tried the free version it didn't support "labels", for instance, which were essential to what I wanted to do.
On 1/19/2023 5:26 AM, Puckdropper wrote:
On the front page, these guys say "Buy it once, own it forever."
https://www.alibre.com/
I really need to see if it will do what I do, I'd like to reward
those guys with some business for having sane licensing terms.
Puckdropper
Just looking at it, I would rather pay the price of something that I
am proficient with than to have to learn a 7th drawing program. But
at least there is a 30 day trial. I wonder what you don't get with
the $150 version vs the $600~$1400 versions.
sucks because it needs some fixes. (ROUND circles? What's that?)
krw@notreal.com wrote in news:q18hsh5r4lf6b69mn8iqro37h3qrq722e2@4ax.com:
On Wed, 18 Jan 2023 09:50:39 GMT, Puckdropper <puckdropper@yahoo.com>
wrote:
I'm stuck on Sketchup Make 2017 because of poor business decisions. >>>Software as a service, renting software, programs running exclusively >>>online... It's just not a world I can trust.
I'm the same, though it's getting harder and harder to do. I just
"rented" Shaper Studio. I'm not all that happy about it but it wasn't
all that expensive.
On the front page, these guys say "Buy it once, own it forever." >https://www.alibre.com/
I really need to see if it will do what I do, I'd like to reward those guys >with some business for having sane licensing terms.
On 1/19/2023 6:15 AM, Puckdropper wrote:
The solid modeler (drawing) is pretty much the same, which
sucks because it needs some fixes. (ROUND circles? What's that?)
To be fair, due to "raster graphics", in many computer applications,
circles are merely polygons (an ordered list of vertices). And the
more vertices you want, the most space it takes and the longer it
takes to render the geometry. I believe that SU allows you to override
the default number of edges or vertices for a particular circle. In
"old" (or new?) "vector graphics" monitors, circles might possibly
render better--I honestly don't know the answer, but my mind is open
to this possibility. When I was in school, the vector graphics monitor
was "that old dusty thing in the corner".
Leon <lcb11211@swbelldotnet> wrote in news:ABydnVjg9upD71T-nZ2dnZfqn_idnZ2d@giganews.com:
On 1/19/2023 5:26 AM, Puckdropper wrote:
On the front page, these guys say "Buy it once, own it forever."
https://www.alibre.com/
I really need to see if it will do what I do, I'd like to reward
those guys with some business for having sane licensing terms.
Puckdropper
Just looking at it, I would rather pay the price of something that I
am proficient with than to have to learn a 7th drawing program. But
at least there is a 30 day trial. I wonder what you don't get with
the $150 version vs the $600~$1400 versions.
My little hobby business is 3D printing scale models. That means the
more time I spend in Sketchup the longer a new model takes. If a new
program can get me to the end faster then I'm all for it.
Trimble got rid of the option to buy Sketchup Pro outright. It's now all rental software.
Puckdropper
On Thu, 19 Jan 2023 11:26:38 GMT, Puckdropper <puckdropper@yahoo.com>
wrote:
krw@notreal.com wrote in news:q18hsh5r4lf6b69mn8iqro37h3qrq722e2@4ax.com:
On Wed, 18 Jan 2023 09:50:39 GMT, Puckdropper <puckdropper@yahoo.com>
wrote:
I'm stuck on Sketchup Make 2017 because of poor business decisions.
Software as a service, renting software, programs running exclusively
online... It's just not a world I can trust.
I'm the same, though it's getting harder and harder to do. I just
"rented" Shaper Studio. I'm not all that happy about it but it wasn't
all that expensive.
On the front page, these guys say "Buy it once, own it forever."
https://www.alibre.com/
The price for the personal/workshop version is at the right price
point. SVG and DXF support makes it a potential SketchUp killer for
me.
It does have a $50/yr maintenance cost.
I really need to see if it will do what I do, I'd like to reward those guys >> with some business for having sane licensing terms.
Me too. Thanks for linking it. I'll have to download the trial soon.
On 1/19/2023 2:08 PM, Puckdropper wrote:
Leon <lcb11211@swbelldotnet> wrote in
news:ABydnVjg9upD71T-nZ2dnZfqn_idnZ2d@giganews.com:
On 1/19/2023 5:26 AM, Puckdropper wrote:
On the front page, these guys say "Buy it once, own it forever."
https://www.alibre.com/
I really need to see if it will do what I do, I'd like to reward
those guys with some business for having sane licensing terms.
Puckdropper
Just looking at it, I would rather pay the price of something that I
am proficient with than to have to learn a 7th drawing program. But
at least there is a 30 day trial. I wonder what you don't get with
the $150 version vs the $600~$1400 versions.
My little hobby business is 3D printing scale models. That means the
more time I spend in Sketchup the longer a new model takes. If a new
program can get me to the end faster then I'm all for it.
Trimble got rid of the option to buy Sketchup Pro outright. It's now all
rental software.
Maybe. Have you spoken to the sales staff? I talked to them before >purchasing with the new pricing 2 years ago and they said that the Pro >version is still the desktop version and iPad version and web or chrome >version. You do have to upgrade yearly if you want the improvements
and upgrades but not doing so prevents updates and improvements.
As explained to me you do not have to resubscribe to continue to use it.
That said I can easily fit $300 per year into my budget. It pays for
itself many times over with the first job each year.
One thing that is important to me with Sketchup Pro is that I can
customize the lay out, icons, short cuts, etc. IIRC the web versions
do not allow that.
BUT if this other program will write directly to SVG that saves a step.
And if it draws better that may be better for you. Also, I have drawn >caster wheels on Sketchp, converted to SVG on Sketchup and Cut those
casters out of Baltic birch with my Shaper Origin. They were round.
On Fri, 20 Jan 2023 10:50:36 -0600, Leon <lcb11211@swbelldotnet>
wrote:
On 1/19/2023 2:08 PM, Puckdropper wrote:
Leon <lcb11211@swbelldotnet> wrote in
news:ABydnVjg9upD71T-nZ2dnZfqn_idnZ2d@giganews.com:
On 1/19/2023 5:26 AM, Puckdropper wrote:
On the front page, these guys say "Buy it once, own it forever."
https://www.alibre.com/
I really need to see if it will do what I do, I'd like to reward
those guys with some business for having sane licensing terms.
Puckdropper
Just looking at it, I would rather pay the price of something that I
am proficient with than to have to learn a 7th drawing program. But
at least there is a 30 day trial. I wonder what you don't get with
the $150 version vs the $600~$1400 versions.
My little hobby business is 3D printing scale models. That means the
more time I spend in Sketchup the longer a new model takes. If a new
program can get me to the end faster then I'm all for it.
Trimble got rid of the option to buy Sketchup Pro outright. It's now all >>> rental software.
Maybe. Have you spoken to the sales staff? I talked to them before
purchasing with the new pricing 2 years ago and they said that the Pro
version is still the desktop version and iPad version and web or chrome
version. You do have to upgrade yearly if you want the improvements
and upgrades but not doing so prevents updates and improvements.
As explained to me you do not have to resubscribe to continue to use it.
That said I can easily fit $300 per year into my budget. It pays for
itself many times over with the first job each year.
One thing that is important to me with Sketchup Pro is that I can
customize the lay out, icons, short cuts, etc. IIRC the web versions
do not allow that.
The web version is so slow that it's useless. I tried it and went
back to '17.
BUT if this other program will write directly to SVG that saves a step.I thought SU pro would write SVGs.
And if it draws better that may be better for you. Also, I have drawn
caster wheels on Sketchp, converted to SVG on Sketchup and Cut those
casters out of Baltic birch with my Shaper Origin. They were round.
Bill <nonegiven@att.net> wrote in news:0mlyL.324999$MVg8.43782@fx12.iad:
On 1/19/2023 6:15 AM, Puckdropper wrote:
The solid modeler (drawing) is pretty much the same, which
sucks because it needs some fixes. (ROUND circles? What's that?)
To be fair, due to "raster graphics", in many computer applications,
circles are merely polygons (an ordered list of vertices). And the
more vertices you want, the most space it takes and the longer it
takes to render the geometry. I believe that SU allows you to override
the default number of edges or vertices for a particular circle. In
"old" (or new?) "vector graphics" monitors, circles might possibly
render better--I honestly don't know the answer, but my mind is open
to this possibility. When I was in school, the vector graphics monitor
was "that old dusty thing in the corner".
When you draw a circle about 4 inches in diameter then send it to a 3D printer it prints out with noticable flats along the outside. With any
other program, it will be round.
I've tried increasing the number of sides, but usually hit the limits
before I get something really round. My current solution is just not to print anything that requires a really large circle.
Puckdropper
On 1/19/2023 9:04 PM, krw@notreal.com wrote:
On Thu, 19 Jan 2023 11:26:38 GMT, Puckdropper <puckdropper@yahoo.com>
wrote:
krw@notreal.com wrote in news:q18hsh5r4lf6b69mn8iqro37h3qrq722e2@4ax.com: >>>
On Wed, 18 Jan 2023 09:50:39 GMT, Puckdropper <puckdropper@yahoo.com>
wrote:
I'm stuck on Sketchup Make 2017 because of poor business decisions.
Software as a service, renting software, programs running exclusively >>>>> online... It's just not a world I can trust.
I'm the same, though it's getting harder and harder to do. I just
"rented" Shaper Studio. I'm not all that happy about it but it wasn't
all that expensive.
On the front page, these guys say "Buy it once, own it forever."
https://www.alibre.com/
The price for the personal/workshop version is at the right price
point. SVG and DXF support makes it a potential SketchUp killer for
me.
SVG and DXF Support. That will likely require a plug in which may be
free and may require extra cash. DXF is supported tith Sketchup Pro and
the SVG plug in, the one I use, is free. Food for thought. And yes it >could be a Sketchup killer but Sketchup is to well suited for woodworking.
It does have a $50/yr maintenance cost.
In that case, maybe not much better than the Pro version of Sketchup.
Sketch up requires annual maintenance for updates and quite a bit more
but Sketchup Pro updates are not necessary to continue using the program.
I really need to see if it will do what I do, I'd like to reward those guys >>> with some business for having sane licensing terms.
Yes! Let us know. While the licensing terms are more reasonable than >Sketchup, Sketchup is a load more reasonable than AutoCAD, a program I
used for years.
If I consider how many years I used Sketchup for free, the new Pro
pricing is easier to swallow.
Me too. Thanks for linking it. I'll have to download the trial soon.
On 1/20/2023 2:34 PM, krw@notreal.com wrote:
On Fri, 20 Jan 2023 10:50:36 -0600, Leon <lcb11211@swbelldotnet>
wrote:
On 1/19/2023 2:08 PM, Puckdropper wrote:
Leon <lcb11211@swbelldotnet> wrote in
news:ABydnVjg9upD71T-nZ2dnZfqn_idnZ2d@giganews.com:
On 1/19/2023 5:26 AM, Puckdropper wrote:
On the front page, these guys say "Buy it once, own it forever."
https://www.alibre.com/
I really need to see if it will do what I do, I'd like to reward
those guys with some business for having sane licensing terms.
Puckdropper
Just looking at it, I would rather pay the price of something that I >>>>> am proficient with than to have to learn a 7th drawing program. But >>>>> at least there is a 30 day trial. I wonder what you don't get with >>>>> the $150 version vs the $600~$1400 versions.
My little hobby business is 3D printing scale models. That means the
more time I spend in Sketchup the longer a new model takes. If a new
program can get me to the end faster then I'm all for it.
Trimble got rid of the option to buy Sketchup Pro outright. It's now all >>>> rental software.
Maybe. Have you spoken to the sales staff? I talked to them before
purchasing with the new pricing 2 years ago and they said that the Pro
version is still the desktop version and iPad version and web or chrome
version. You do have to upgrade yearly if you want the improvements
and upgrades but not doing so prevents updates and improvements.
As explained to me you do not have to resubscribe to continue to use it. >>>
That said I can easily fit $300 per year into my budget. It pays for
itself many times over with the first job each year.
One thing that is important to me with Sketchup Pro is that I can
customize the lay out, icons, short cuts, etc. IIRC the web versions
do not allow that.
The web version is so slow that it's useless. I tried it and went
back to '17.
That is another reason that I don't use the web version. Were you by
any chance using the free web version or the paid web version?
BUT if this other program will write directly to SVG that saves a step.I thought SU pro would write SVGs.
And if it draws better that may be better for you. Also, I have drawn
caster wheels on Sketchp, converted to SVG on Sketchup and Cut those
casters out of Baltic birch with my Shaper Origin. They were round.
With the free plugin. When you high lite a surface and right click you >select FaceSVG from the pop up window. it copies a black version of
the surface to the origin of the drawing. Right clicking the black
copy allows you to Write SVG Profile.
On Fri, 20 Jan 2023 10:30:45 -0600, Leon <lcb11211@swbelldotnet>
wrote:
On 1/19/2023 9:04 PM, krw@notreal.com wrote:
On Thu, 19 Jan 2023 11:26:38 GMT, Puckdropper <puckdropper@yahoo.com>
wrote:
krw@notreal.com wrote in news:q18hsh5r4lf6b69mn8iqro37h3qrq722e2@4ax.com: >>>>
On Wed, 18 Jan 2023 09:50:39 GMT, Puckdropper <puckdropper@yahoo.com> >>>>> wrote:
I'm stuck on Sketchup Make 2017 because of poor business decisions. >>>>>> Software as a service, renting software, programs running exclusively >>>>>> online... It's just not a world I can trust.
I'm the same, though it's getting harder and harder to do. I just
"rented" Shaper Studio. I'm not all that happy about it but it wasn't >>>>> all that expensive.
On the front page, these guys say "Buy it once, own it forever."
https://www.alibre.com/
The price for the personal/workshop version is at the right price
point. SVG and DXF support makes it a potential SketchUp killer for
me.
SVG and DXF Support. That will likely require a plug in which may be
free and may require extra cash. DXF is supported tith Sketchup Pro and
the SVG plug in, the one I use, is free. Food for thought. And yes it
could be a Sketchup killer but Sketchup is to well suited for woodworking.
Good point. I was thinking about Shaper use. Looking into it some
more, it would probably be better for a 3D printer than woodworking. I
have enough to learn without getting into 3D.
Isn't AutoCAD 2D only?
It does have a $50/yr maintenance cost.
In that case, maybe not much better than the Pro version of Sketchup.
Sketch up requires annual maintenance for updates and quite a bit more
but Sketchup Pro updates are not necessary to continue using the program.
I really need to see if it will do what I do, I'd like to reward those guys
with some business for having sane licensing terms.
Yes! Let us know. While the licensing terms are more reasonable than
Sketchup, Sketchup is a load more reasonable than AutoCAD, a program I
used for years.
If I consider how many years I used Sketchup for free, the new ProI find paying for it harder to swallow. ;-)
pricing is easier to swallow.
Me too. Thanks for linking it. I'll have to download the trial soon.
On Fri, 20 Jan 2023 17:43:40 -0600, Leon <lcb11211@swbelldotnet>
wrote:
On 1/20/2023 2:34 PM, krw@notreal.com wrote:
On Fri, 20 Jan 2023 10:50:36 -0600, Leon <lcb11211@swbelldotnet>
wrote:
On 1/19/2023 2:08 PM, Puckdropper wrote:
Leon <lcb11211@swbelldotnet> wrote in
news:ABydnVjg9upD71T-nZ2dnZfqn_idnZ2d@giganews.com:
On 1/19/2023 5:26 AM, Puckdropper wrote:
On the front page, these guys say "Buy it once, own it forever." >>>>>>> https://www.alibre.com/
I really need to see if it will do what I do, I'd like to reward >>>>>>> those guys with some business for having sane licensing terms.
Puckdropper
Just looking at it, I would rather pay the price of something that I >>>>>> am proficient with than to have to learn a 7th drawing program. But >>>>>> at least there is a 30 day trial. I wonder what you don't get with >>>>>> the $150 version vs the $600~$1400 versions.
My little hobby business is 3D printing scale models. That means the >>>>> more time I spend in Sketchup the longer a new model takes. If a new >>>>> program can get me to the end faster then I'm all for it.
Trimble got rid of the option to buy Sketchup Pro outright. It's now all >>>>> rental software.
Maybe. Have you spoken to the sales staff? I talked to them before >>>> purchasing with the new pricing 2 years ago and they said that the Pro >>>> version is still the desktop version and iPad version and web or chrome >>>> version. You do have to upgrade yearly if you want the improvements
and upgrades but not doing so prevents updates and improvements.
As explained to me you do not have to resubscribe to continue to use it. >>>>
That said I can easily fit $300 per year into my budget. It pays for
itself many times over with the first job each year.
One thing that is important to me with Sketchup Pro is that I can
customize the lay out, icons, short cuts, etc. IIRC the web versions >>>> do not allow that.
The web version is so slow that it's useless. I tried it and went
back to '17.
That is another reason that I don't use the web version. Were you by
any chance using the free web version or the paid web version?
Free. Pro is a little rich for me. If I were doing this
commercially, it would be a slam dunk.
BUT if this other program will write directly to SVG that saves a step. >>>> And if it draws better that may be better for you. Also, I have drawn >>>> caster wheels on Sketchp, converted to SVG on Sketchup and Cut thoseI thought SU pro would write SVGs.
casters out of Baltic birch with my Shaper Origin. They were round. >>>>
With the free plugin. When you high lite a surface and right click you
select FaceSVG from the pop up window. it copies a black version of
the surface to the origin of the drawing. Right clicking the black
copy allows you to Write SVG Profile.
On 1/21/2023 10:43 PM, krw@notreal.com wrote:
On Fri, 20 Jan 2023 17:43:40 -0600, Leon <lcb11211@swbelldotnet>
wrote:
On 1/20/2023 2:34 PM, krw@notreal.com wrote:
On Fri, 20 Jan 2023 10:50:36 -0600, Leon <lcb11211@swbelldotnet>
wrote:
On 1/19/2023 2:08 PM, Puckdropper wrote:
Leon <lcb11211@swbelldotnet> wrote in
news:ABydnVjg9upD71T-nZ2dnZfqn_idnZ2d@giganews.com:
On 1/19/2023 5:26 AM, Puckdropper wrote:
On the front page, these guys say "Buy it once, own it forever." >>>>>>>> https://www.alibre.com/
I really need to see if it will do what I do, I'd like to reward >>>>>>>> those guys with some business for having sane licensing terms. >>>>>>>>
Puckdropper
Just looking at it, I would rather pay the price of something that I >>>>>>> am proficient with than to have to learn a 7th drawing program. But >>>>>>> at least there is a 30 day trial. I wonder what you don't get with >>>>>>> the $150 version vs the $600~$1400 versions.
My little hobby business is 3D printing scale models. That means the >>>>>> more time I spend in Sketchup the longer a new model takes. If a new >>>>>> program can get me to the end faster then I'm all for it.
Trimble got rid of the option to buy Sketchup Pro outright. It's now all
rental software.
Maybe. Have you spoken to the sales staff? I talked to them before >>>>> purchasing with the new pricing 2 years ago and they said that the Pro >>>>> version is still the desktop version and iPad version and web or chrome >>>>> version. You do have to upgrade yearly if you want the improvements >>>>> and upgrades but not doing so prevents updates and improvements.
As explained to me you do not have to resubscribe to continue to use it. >>>>>
That said I can easily fit $300 per year into my budget. It pays for >>>>> itself many times over with the first job each year.
One thing that is important to me with Sketchup Pro is that I can
customize the lay out, icons, short cuts, etc. IIRC the web versions >>>>> do not allow that.
The web version is so slow that it's useless. I tried it and went
back to '17.
That is another reason that I don't use the web version. Were you by
any chance using the free web version or the paid web version?
Free. Pro is a little rich for me. If I were doing this
commercially, it would be a slam dunk.
I would suspect the free version may not be given the band width to
really work quickly.
Yes the paid Pro version is pricey but how much do you spend on tools.
;~) LOL.
For the time being I would still use Pro if I was not selling my work.
I'm in the middle of re-doing our kitchen and would not want to be
learning new software.
IIRC you can load a trial version.
On 1/21/2023 10:49 PM, krw@notreal.com wrote:
On Fri, 20 Jan 2023 10:30:45 -0600, Leon <lcb11211@swbelldotnet>
wrote:
On 1/19/2023 9:04 PM, krw@notreal.com wrote:Good point. I was thinking about Shaper use. Looking into it some
On Thu, 19 Jan 2023 11:26:38 GMT, Puckdropper <puckdropper@yahoo.com>
wrote:
krw@notreal.com wrote in news:q18hsh5r4lf6b69mn8iqro37h3qrq722e2@4ax.com: >>>>>
On Wed, 18 Jan 2023 09:50:39 GMT, Puckdropper <puckdropper@yahoo.com> >>>>>> wrote:
I'm stuck on Sketchup Make 2017 because of poor business decisions. >>>>>>> Software as a service, renting software, programs running exclusively >>>>>>> online... It's just not a world I can trust.
I'm the same, though it's getting harder and harder to do. I just >>>>>> "rented" Shaper Studio. I'm not all that happy about it but it wasn't >>>>>> all that expensive.
On the front page, these guys say "Buy it once, own it forever."
https://www.alibre.com/
The price for the personal/workshop version is at the right price
point. SVG and DXF support makes it a potential SketchUp killer for
me.
SVG and DXF Support. That will likely require a plug in which may be
free and may require extra cash. DXF is supported tith Sketchup Pro and >>> the SVG plug in, the one I use, is free. Food for thought. And yes it >>> could be a Sketchup killer but Sketchup is to well suited for woodworking. >>
more, it would probably be better for a 3D printer than woodworking. I
have enough to learn without getting into 3D.
Isn't AutoCAD 2D only?
It does have a $50/yr maintenance cost.
In that case, maybe not much better than the Pro version of Sketchup.
Sketch up requires annual maintenance for updates and quite a bit more
but Sketchup Pro updates are not necessary to continue using the program. >>>
I really need to see if it will do what I do, I'd like to reward those guys
with some business for having sane licensing terms.
Yes! Let us know. While the licensing terms are more reasonable than >>> Sketchup, Sketchup is a load more reasonable than AutoCAD, a program I
used for years.
AutoCAD is 3D, AutoCAD LT is 2D, I used the LT version and it was/is >expensive, $460 per year.
If I consider how many years I used Sketchup for free, the new ProI find paying for it harder to swallow. ;-)
pricing is easier to swallow.
So did I but it is the best program for, woodworking, that I have ever
used. So not a big deal. And I found that most software is going to
the subscription route. So even if they say you own it, that may be a >limited time. One the pisses me off is Quicken. They say you own and
keep your files on your computer and load the program on your computer.
BUT if you do not continue to subscribe you will not be able to use the >program or look at your files.
On Sun, 22 Jan 2023 11:30:47 -0600, Leon <lcb11211@swbelldotnet>
wrote:
On 1/21/2023 10:49 PM, krw@notreal.com wrote:
On Fri, 20 Jan 2023 10:30:45 -0600, Leon <lcb11211@swbelldotnet>
wrote:
On 1/19/2023 9:04 PM, krw@notreal.com wrote:Good point. I was thinking about Shaper use. Looking into it some
On Thu, 19 Jan 2023 11:26:38 GMT, Puckdropper <puckdropper@yahoo.com> >>>>> wrote:
krw@notreal.com wrote in news:q18hsh5r4lf6b69mn8iqro37h3qrq722e2@4ax.com:
On Wed, 18 Jan 2023 09:50:39 GMT, Puckdropper <puckdropper@yahoo.com> >>>>>>> wrote:
I'm stuck on Sketchup Make 2017 because of poor business decisions. >>>>>>>> Software as a service, renting software, programs running exclusively >>>>>>>> online... It's just not a world I can trust.
I'm the same, though it's getting harder and harder to do. I just >>>>>>> "rented" Shaper Studio. I'm not all that happy about it but it wasn't >>>>>>> all that expensive.
On the front page, these guys say "Buy it once, own it forever."
https://www.alibre.com/
The price for the personal/workshop version is at the right price
point. SVG and DXF support makes it a potential SketchUp killer for >>>>> me.
SVG and DXF Support. That will likely require a plug in which may be >>>> free and may require extra cash. DXF is supported tith Sketchup Pro and >>>> the SVG plug in, the one I use, is free. Food for thought. And yes it >>>> could be a Sketchup killer but Sketchup is to well suited for woodworking. >>>
more, it would probably be better for a 3D printer than woodworking. I
have enough to learn without getting into 3D.
Isn't AutoCAD 2D only?
It does have a $50/yr maintenance cost.
In that case, maybe not much better than the Pro version of Sketchup.
Sketch up requires annual maintenance for updates and quite a bit more >>>> but Sketchup Pro updates are not necessary to continue using the program. >>>>
I really need to see if it will do what I do, I'd like to reward those guys
with some business for having sane licensing terms.
Yes! Let us know. While the licensing terms are more reasonable than >>>> Sketchup, Sketchup is a load more reasonable than AutoCAD, a program I >>>> used for years.
AutoCAD is 3D, AutoCAD LT is 2D, I used the LT version and it was/is
expensive, $460 per year.
If I consider how many years I used Sketchup for free, the new ProI find paying for it harder to swallow. ;-)
pricing is easier to swallow.
So did I but it is the best program for, woodworking, that I have ever
used. So not a big deal. And I found that most software is going to
the subscription route. So even if they say you own it, that may be a
limited time. One the pisses me off is Quicken. They say you own and
keep your files on your computer and load the program on your computer.
BUT if you do not continue to subscribe you will not be able to use the
program or look at your files.
That might as well be ransomware.
On Sun, 22 Jan 2023 11:55:29 -0600, Leon <lcb11211@swbelldotnet>
wrote:
On 1/21/2023 10:43 PM, krw@notreal.com wrote:
On Fri, 20 Jan 2023 17:43:40 -0600, Leon <lcb11211@swbelldotnet>
wrote:
On 1/20/2023 2:34 PM, krw@notreal.com wrote:
On Fri, 20 Jan 2023 10:50:36 -0600, Leon <lcb11211@swbelldotnet>
wrote:
On 1/19/2023 2:08 PM, Puckdropper wrote:
Leon <lcb11211@swbelldotnet> wrote in
news:ABydnVjg9upD71T-nZ2dnZfqn_idnZ2d@giganews.com:
On 1/19/2023 5:26 AM, Puckdropper wrote:
On the front page, these guys say "Buy it once, own it forever." >>>>>>>>> https://www.alibre.com/
I really need to see if it will do what I do, I'd like to reward >>>>>>>>> those guys with some business for having sane licensing terms. >>>>>>>>>
Puckdropper
Just looking at it, I would rather pay the price of something that I >>>>>>>> am proficient with than to have to learn a 7th drawing program. But >>>>>>>> at least there is a 30 day trial. I wonder what you don't get with >>>>>>>> the $150 version vs the $600~$1400 versions.
My little hobby business is 3D printing scale models. That means the >>>>>>> more time I spend in Sketchup the longer a new model takes. If a new >>>>>>> program can get me to the end faster then I'm all for it.
Trimble got rid of the option to buy Sketchup Pro outright. It's now all
rental software.
Maybe. Have you spoken to the sales staff? I talked to them before >>>>>> purchasing with the new pricing 2 years ago and they said that the Pro >>>>>> version is still the desktop version and iPad version and web or chrome >>>>>> version. You do have to upgrade yearly if you want the improvements >>>>>> and upgrades but not doing so prevents updates and improvements.
As explained to me you do not have to resubscribe to continue to use it. >>>>>>
That said I can easily fit $300 per year into my budget. It pays for >>>>>> itself many times over with the first job each year.
One thing that is important to me with Sketchup Pro is that I can
customize the lay out, icons, short cuts, etc. IIRC the web versions >>>>>> do not allow that.
The web version is so slow that it's useless. I tried it and went
back to '17.
That is another reason that I don't use the web version. Were you by >>>> any chance using the free web version or the paid web version?
Free. Pro is a little rich for me. If I were doing this
commercially, it would be a slam dunk.
I would suspect the free version may not be given the band width to
really work quickly.
Yes the paid Pro version is pricey but how much do you spend on tools.
;~) LOL.
I don't rent tools. ;-)
For the time being I would still use Pro if I was not selling my work.
I'm in the middle of re-doing our kitchen and would not want to be
learning new software.
I probably would if I had a large job like that. The next year?
IIRC you can load a trial version.For a month. Just enough to get something done then throw it way or
pay. Kinda like a streaming service. Get it for a month free, then
get hooked on a series.
BTW, I did buy/rent Studio for the $100, so there is that. Outside
the large library of shapes and projects, it's pretty cheesy.
| Sysop: | Keyop |
|---|---|
| Location: | Huddersfield, West Yorkshire, UK |
| Users: | 325 |
| Nodes: | 16 (2 / 14) |
| Uptime: | 84:39:05 |
| Calls: | 7,164 |
| Files: | 12,543 |
| Messages: | 5,534,336 |