Hi,

I am also in need of the instructions if they are still available. Please send to Van Gray (van_gray@baylor.edu). Thanks very much! Respectfully, Van

--
For full context, visit https://www.homeownershub.com/woodworking/morse-design-accujoint-finger-joint-jig-371397-.htm

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

If you could email me a copy of the Instructions for the Morse Design Accu Joint, I would be most appreciative. My email address is: van_gray@baylor.edu

Thanks very much, Van

--
For full context, visit https://www.homeownershub.com/woodworking/morse-design-accujoint-finger-joint-jig-371397-.htm

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

Hi,
If you have the instructions for the Morse Design Accu Joint Jig, I sure would appreciate a copy of them. I have one of the jigs, but no instructions. Any assistance you could provide would be most appreciated. Best regards, Van Gray

--
For full context, visit https://www.homeownershub.com/woodworking/morse-design-accujoint-finger-joint-jig-371397-.htm

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

van snipped-for-privacy@baylor.edu

https://www.homeownershub.com/img/2ict
https://www.homeownershub.com/img/2icv
https://www.homeownershub.com/img/2icx
https://www.homeownershub.com/img/2icz

--
For full context, visit https://www.homeownershub.com/woodworking/morse-design-accujoint-finger-joint-jig-371397-.htm

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

Have had this for 20 years never had any instructions can you send them to me? Thanks so much .

--
For full context, visit https://www.homeownershub.com/woodworking/morse-design-accujoint-finger-joint-jig-371397-.htm

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)