XPost: rec.radio.amateur.homebrew
amateur radio - Hackaday
///////////////////////////////////////////
Bringing Some Discipline to an SDR Transmitter
Posted: 13 Jul 2022 08:30 AM PDT
https://hackaday.com/2022/07/13/bringing-some-discipline-to-an-sdr-transmitter/
The proliferation of software-defined radio (SDR) technology has been a
godsend for RF hobbyists. SDR-based receivers and transmitters have gotten
so cheap that youve probably got a stick or two lying around your bench
right now we can see three from where we sit, in fact.
But cheap comes at a price, usually in the form of frequency stability,
which can be prohibitive in some applications especially amateur radio,
where spectrum hygiene is of the utmost concern. So we were pleased to see [Tech Minds] tackle the SDR frequency stability problem by using a GPS-disciplined oscillator. The setup uses an ADALM-PLUTO SDR transceiver
and a precision oscillator from Leo Bodnar Electronics. The oscillator can
be programmed to output a rock-solid, GPS-disciplined signal over a wide
range of frequencies. The Pluto has an external oscillator input that looks
for 40 MHz, which is well within the range of the GPSDO.
Setup is as easy as plugging the oscillators output into the SDRs external clock input using an SMA to UFL jumper, and tweaking the settings in the
SDR and oscillator. Not all SDRs will have an external clock input, of
course, so your mileage may vary. But if your gear is suitably equipped,
this looks like a great way to get bang-on frequency the video below shows just how much the undisciplined SDR can drift.
Like any good ham, [Tech Minds] is doing his bit to keep his signals clean
and on target. His chief use case for this setup will be to work QO-100, amateur radios first geosynchronous satellite repeater. Weve got to say
that we hams living on the two-thirds of the globe not covered by this satellite are just dying to get a geosynchronous bird (or two) of our own
to play with like this.
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)