• horizontal loop on top of a High Rise

    From MVS Negi@21:1/5 to MVS Negi on Thu Jun 10 03:12:43 2021
    On Thursday, June 10, 2021 at 3:28:51 PM UTC+5:30, MVS Negi wrote:
    I have 400 feet run for a square Loop on top of 15 storeyed building. My shack is two floors below on 13 Floor. It is difficult to reduce the 400 feet to 270 odd feet for full wave for 80 mtrs due layout issues and I can't increase to 500 plus feet
    needed for 160 mtrs. So my question is:-
    1.Will a 400 mtr Horizontal loop allow me to operate on 40 mtr band and below.
    2. What should be the feed arrangement - Balanced ladder line to the shack to MFJ 939E tuner or 4:1 Balun and coax to the IC 7300? I would like to avoid Ladder Line all the way to the shack and if a short length would do than what length should it be?
    Would be grateful for some practical advice.
    VU2MNX, (Mahendra)

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From MVS Negi@21:1/5 to MVS Negi on Thu Jun 10 03:05:15 2021
    On Thursday, June 10, 2021 at 3:28:51 PM UTC+5:30, MVS Negi wrote:
    I have 400 feet run for a square Loop on top of 15 storeyed building. My shack is two floors below on 13 Floor. It is difficult to reduce the 400 feet to 270 odd feet for full wave for 80 mtrs and i cant increase to 500 plus feet needed for 160 mtrs.
    So my question is:-
    1.Will 400 ft Square Loop allow me to operate 40 mtr and below Ham bands?
    2.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From MVS Negi@21:1/5 to All on Thu Jun 10 02:58:50 2021
    I have 400 feet run for a square Loop on top of 15 storeyed building. My shack is two floors below on 13 Floor. It is difficult to reduce the 400 feet to 270 odd feet for full wave for 80 mtrs and i cant increase to 500 plus feet needed for 160 mtrs. So
    my question is:-
    1.t

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)