• [VE7SL] Hunting For NDBs In CLE281

    From VE7SL via rec.radio.amateur.moderat@21:1/5 to All on Thu Jun 23 21:11:53 2022
    XPost: rec.radio.amateur.moderated

    VE7SL - Steve - Amateur Radio Blog

    Hunting For NDBs In CLE281

    Posted: 22 Jun 2022 06:54 PM PDT http://ve7sl.blogspot.com/2022/06/hunting-for-ndbs-in-cle281.html

    YIV-300 Island Lake, MB (ve3gop.com)

    It's CLE time once again. This is a challenge for all newcomers to NDB listening and the ultimate test of your medium frequency receiving capabilities. Can you meet the challenge?'CLE's are 'Co-ordinated
    Listening Events, and NDB DXers around the world focus their listening time
    on one small slice of the NDB spectrum. It's a little different this time, with beacon hunters asked to report NDBs heard on any and all of the 10kHz markers only ... ie. 350, 360 ..
    A central target for listeners in North America is YIV - 300 kHz in Island Lake, Manitoba. Listen for YIV's upper sideband on 300.401 kHz. YIV's 500
    watts is widely heard throughout North America and has been logged in
    Europe. Can you find it?
    When tuning for NDBs, put your receiver in the CW mode and listen for the
    NDB's CW identifier, repeated every few seconds. Listen for U.S. NDB identifiers approximately 1 kHz higher or lower than the published
    transmitted frequency since these beacons are modulated with a 1020 Hz tone approximately.

    For example, 'AA' near Fargo, ND, transmitted on 365 kHz and its upper
    sideband CW identifier was tuned at 366.025 kHz while its lower sideband CW ident could be tuned at 363.946 kHz. Its USB tone was actually 1025 Hz
    while its LSB tone was 1054 Hz.

    Often, one sideband will be much stronger than the other so if you don't
    hear the first one, try listening on the other sideband.

    Canadian NDBs normally have an USB tone only, usually very close to 400 Hz. They also have a long dash (keydown) following the CW identifier.

    All NDBs heard in North America will be listed in the RNA database (updated daily) while those heard in Europe may be found in the REU database.
    Beacons heard outside of these regions will be found in the RWW database.

    From CLE organizers comes the following CLE info:Hello all,Here are all the details for this weekend's co-ordinated listening event.This one will be a
    bit different - we shall be trying out a new kind of ‘Special’. Days: Friday 24 June - Monday 27 June Times: Start and End at midday, your
    LOCAL time Target: NDBs with nominal (published) frequencies
    of: 200, 210, 220, 230, ………. . . , 1630
    kHz i.e. the NDBs on any/all of the 10 kHz
    markers but none on other frequencies (including nnn.5)We
    hope this will provide a few more (mid-summer) NDBs than usual for Northern Hemisphere listeners - and for sure a (mid-winter) bonus for Southern Hemisphere listeners who always have relatively few NDBs within range. The usual ‘rules’ for log-making will apply. First-time CLE logs, short or long, will also be very welcome, wherever you are listening from.Please log
    the NDBs you can positively identify that are listed on the ‘ ---0.0 kHz’ frequencies, plus any UNIDs heard there too.Send your CLE log to ndblist@groups.io with CLE281 and FINAL at the start of its
    title.Please show on EVERY LINE of your log: # The date and UTC (the day changes at 00:00 UTC). # kHz - the beacon's nominal published frequency,
    if you know it. # The Call Ident. Show those main items FIRST on each
    line, before any optional details such as the NDB's Location, Distance, Offsets, Cycle time, etc.As always, make your log meaningful to everyone by including your listening location and details of the receiver, aerial(s), etc.It would be OK to use one remote receiver, with the owner's permission
    if necessary, provided that ALL your loggings for the CLE are made using it.Joachim or I will send the usual 'Any More Logs?' email at about 19:00
    UTC on Tuesday so that you can check that your log has been found OK.Do
    make sure that your log has arrived on the List at the very latest by 08:00
    UTC on Wed. 29th June.We hope to complete making the combined results
    within a day or two.You can find all CLE-related information from our CLE
    page ( http://www.ndblist.info/cle.htm ).Good listening Brian &
    JoachimThese listening events serve several purposes. They• determine, worldwide, which beacons are actually in service and on-the-air so the newly-re-vamped Rxx online database can be kept up-to-date

    • determine, worldwide, which beacons are out-of-service or have gone
    silent since the last CLE covering this range

    • will indicate the state of propagation conditions at the various participant locations

    • will give you an indication of how well your LF/MF receiving system is working

    • give participants a fun yet challenging activity to keep their listening skills honed

    Final details can be found at the NDB List website, and worldwide results,
    for every participant, will be posted there a few days after the event.

    The NDB List Group is a great place to learn more about the 'Art of NDB
    DXing' or to meet other DXers in your region. There is a lot of good information available there and new members are always very welcome. As
    well, you can follow the results of other CLE participants from night to
    night as propagation is always an active topic of discussion.

    You need not be an NDB List member to participate in the CLEs and all
    reports, no matter how small, are of much value to the organizers.

    Remember - 'First-time' logs are always VERY welcome!

    Reports may be sent to the NDB List Group or e-mailed to CLE co-ordinator, Brian Keyte (G3SIA), whose address appears above. If you are a member of
    the group, all final results will also be e-mailed and posted there.

    Please ... give the CLE a try ... then let us know what NDB's can be heard
    from your location! Your report can then be added to the worldwide database
    to help keep it up-to-date.

    Have fun and good hunting!

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)