• [M1KTA] What to build with STM32F746G-Disco and SI5351 Board

    From M1KTA via rec.radio.amateur.moderat@21:1/5 to All on Wed Aug 4 03:56:47 2021
    XPost: rec.radio.amateur.moderated, uk.radio.amateur, free.uk.amateur-radio

    M1KTA's QRP ham radio blog

    ///////////////////////////////////////////
    What to build with STM32F746G-Disco and SI5351 Board

    Posted: 03 Aug 2021 07:57 AM PDT http://m1kta-qrp.blogspot.com/2021/08/what-to-build-with-stm32f746g-disco-and.html


    I had these in the workshop and as not operating right now, thought what
    could I make with these and a few other RFy things from the 'junk box'.




    Well I know have some SA612 and SMD op amps and lots of SMD discretes so thought might try the EU1KY analyser, after looking at JA versions (but
    seemed to miss out on the kitting as was sorting Mum's stuff out for Dad).
    The STM32F746G-DISCO board in a blister pack, with a H7 version too, has
    been in the junkbox for a bit.
    I bought a couple of the Front end RF PCB a while back for the EU1KY.

    I have a few SI5351 modules with 25MHz crystal so might see about just
    removing the chip from one and adding it to the PCB and reusing some of the
    SMA connectors and other components.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)