I have some x-y monitors, unknown condition. All are the ones Atari used, 1 or 2 worked before going into storage. Some black and white, some color. I also have a complete asteroids game that I think was working before storage. It's been damp and Ihaven't even seen it in years so it might be a little "wider" than it used to be. ;) Then again it may not be too bad. Also was a color x-y test fixture I made with the guts of a video game with a total crap cabinet, might be a space duel. Transformer,
I realize I'm leaving out a lot of specifics, but I'm first putting a feeler out there to see what people may want and what info about them you might need. These are located in Newport, TN. An hour or less east of Knoxville, TN just a couple milesoff of I-40.
I'm ready to deal, but not get ripped off. If someone were to take it all that would be great. You can give me a high and low price range then decide what they are worth to you after seeing them. I'd like to be able to plug them in, but with the oldcaps in them, I don't know if that would be a good idea. We'll work out something to see what works.
Also is 1 seeburg usc1 (bandshell). I last used it to test a control center about 5 years ago but if it's not working I'm sure I can fix that. In decent condition. (or I could say in great condition for its age) Don't you hate that?
In addition some pinball parts. Lot's of bally mpu's, over 100 gottlieb system 1 cpu's, some system 1 transformer boards and many many more circuit boards.
Oh, since I'm on a video game group, I also have some JAMMA game boards and a cabaret cabinet made to accept any jamma board. Titles to follow. That is if anyone reads this group anymore?
On 4/8/2021 11:00 AM, Tony Miklos wrote:haven't even seen it in years so it might be a little "wider" than it used to be. ;) Then again it may not be too bad. Also was a color x-y test fixture I made with the guts of a video game with a total crap cabinet, might be a space duel. Transformer, p/
I have some x-y monitors, unknown condition. All are the ones Atari used, 1 or 2 worked before going into storage. Some black and white, some color. I also have a complete asteroids game that I think was working before storage. It's been damp and I
off of I-40.I realize I'm leaving out a lot of specifics, but I'm first putting a feeler out there to see what people may want and what info about them you might need. These are located in Newport, TN. An hour or less east of Knoxville, TN just a couple miles
caps in them, I don't know if that would be a good idea. We'll work out something to see what works.I'm ready to deal, but not get ripped off. If someone were to take it all that would be great. You can give me a high and low price range then decide what they are worth to you after seeing them. I'd like to be able to plug them in, but with the old
Also is 1 seeburg usc1 (bandshell). I last used it to test a control center about 5 years ago but if it's not working I'm sure I can fix that. In decent condition. (or I could say in great condition for its age) Don't you hate that?
In addition some pinball parts. Lot's of bally mpu's, over 100 gottlieb system 1 cpu's, some system 1 transformer boards and many many more circuit boards.
Oh, since I'm on a video game group, I also have some JAMMA game boards and a cabaret cabinet made to accept any jamma board. Titles to follow. That is if anyone reads this group anymore?
I read it. Do I get a free x-y color monitor :D
Paul/kma
On Wednesday, April 14, 2021 at 10:12:14 PM UTC-4, Paul wrote:haven't even seen it in years so it might be a little "wider" than it used to be. ;) Then again it may not be too bad. Also was a color x-y test fixture I made with the guts of a video game with a total crap cabinet, might be a space duel. Transformer, p/
On 4/8/2021 11:00 AM, Tony Miklos wrote:
I have some x-y monitors, unknown condition. All are the ones Atari used, 1 or 2 worked before going into storage. Some black and white, some color. I also have a complete asteroids game that I think was working before storage. It's been damp and I
off of I-40.I realize I'm leaving out a lot of specifics, but I'm first putting a feeler out there to see what people may want and what info about them you might need. These are located in Newport, TN. An hour or less east of Knoxville, TN just a couple miles
old caps in them, I don't know if that would be a good idea. We'll work out something to see what works.I'm ready to deal, but not get ripped off. If someone were to take it all that would be great. You can give me a high and low price range then decide what they are worth to you after seeing them. I'd like to be able to plug them in, but with the
Hi,Also is 1 seeburg usc1 (bandshell). I last used it to test a control center about 5 years ago but if it's not working I'm sure I can fix that. In decent condition. (or I could say in great condition for its age) Don't you hate that?
In addition some pinball parts. Lot's of bally mpu's, over 100 gottlieb system 1 cpu's, some system 1 transformer boards and many many more circuit boards.
Oh, since I'm on a video game group, I also have some JAMMA game boards and a cabaret cabinet made to accept any jamma board. Titles to follow. That is if anyone reads this group anymore?
I read it. Do I get a free x-y color monitor :D
Paul/kmaNo, but I'll send out some of the system 1 cpu's for free plus shipping AND handling. Where is everyone posting these days?
On Wednesday, April 14, 2021 at 10:12:14 PM UTC-4, Paul wrote:haven't even seen it in years so it might be a little "wider" than it used to be. ;) Then again it may not be too bad. Also was a color x-y test fixture I made with the guts of a video game with a total crap cabinet, might be a space duel. Transformer, p/
On 4/8/2021 11:00 AM, Tony Miklos wrote:
I have some x-y monitors, unknown condition. All are the ones Atari used, 1 or 2 worked before going into storage. Some black and white, some color. I also have a complete asteroids game that I think was working before storage. It's been damp and I
off of I-40.
I realize I'm leaving out a lot of specifics, but I'm first putting a feeler out there to see what people may want and what info about them you might need. These are located in Newport, TN. An hour or less east of Knoxville, TN just a couple miles
caps in them, I don't know if that would be a good idea. We'll work out something to see what works.
I'm ready to deal, but not get ripped off. If someone were to take it all that would be great. You can give me a high and low price range then decide what they are worth to you after seeing them. I'd like to be able to plug them in, but with the old
I read it. Do I get a free x-y color monitor :D
Also is 1 seeburg usc1 (bandshell). I last used it to test a control center about 5 years ago but if it's not working I'm sure I can fix that. In decent condition. (or I could say in great condition for its age) Don't you hate that?
In addition some pinball parts. Lot's of bally mpu's, over 100 gottlieb system 1 cpu's, some system 1 transformer boards and many many more circuit boards.
Oh, since I'm on a video game group, I also have some JAMMA game boards and a cabaret cabinet made to accept any jamma board. Titles to follow. That is if anyone reads this group anymore?
Paul/kma
No, but I'll send out some of the system 1 cpu's for free plus shipping AND handling. Where is everyone posting these days?
On 4/15/2021 8:23 AM, Tony Miklos wrote:haven't even seen it in years so it might be a little "wider" than it used to be. ;) Then again it may not be too bad. Also was a color x-y test fixture I made with the guts of a video game with a total crap cabinet, might be a space duel. Transformer, p/
On Wednesday, April 14, 2021 at 10:12:14 PM UTC-4, Paul wrote:
On 4/8/2021 11:00 AM, Tony Miklos wrote:
I have some x-y monitors, unknown condition. All are the ones Atari used, 1 or 2 worked before going into storage. Some black and white, some color. I also have a complete asteroids game that I think was working before storage. It's been damp and I
off of I-40.
I realize I'm leaving out a lot of specifics, but I'm first putting a feeler out there to see what people may want and what info about them you might need. These are located in Newport, TN. An hour or less east of Knoxville, TN just a couple miles
old caps in them, I don't know if that would be a good idea. We'll work out something to see what works.
I'm ready to deal, but not get ripped off. If someone were to take it all that would be great. You can give me a high and low price range then decide what they are worth to you after seeing them. I'd like to be able to plug them in, but with the
I read it. Do I get a free x-y color monitor :D
Also is 1 seeburg usc1 (bandshell). I last used it to test a control center about 5 years ago but if it's not working I'm sure I can fix that. In decent condition. (or I could say in great condition for its age) Don't you hate that?
In addition some pinball parts. Lot's of bally mpu's, over 100 gottlieb system 1 cpu's, some system 1 transformer boards and many many more circuit boards.
Oh, since I'm on a video game group, I also have some JAMMA game boards and a cabaret cabinet made to accept any jamma board. Titles to follow. That is if anyone reads this group anymore?
Paul/kma
No, but I'll send out some of the system 1 cpu's for free plus shipping AND handling. Where is everyone posting these days?
Sure, shipping to 08343?
Paul
| Sysop: | Keyop |
|---|---|
| Location: | Huddersfield, West Yorkshire, UK |
| Users: | 293 |
| Nodes: | 16 (2 / 14) |
| Uptime: | 243:04:10 |
| Calls: | 6,625 |
| Calls today: | 1 |
| Files: | 12,175 |
| Messages: | 5,320,204 |