On 2020/12/02 6:28 p.m., TED HURLEY wrote:
i have a model ktn-1401 dead with ringing. replaced horz output transistor. was shorted. still rings
What are you using to test the rings on this Kortek monitor? Usually you
need 7 or 8 rings for the flyback to be good.
What is happening after you replaced the HOT - did it again short out?
Does the HOT have a built-in back EMF diode or is there one on the
circuit board - it may be open. Or if you substituted a different HOT
the substitute may not have a diode built in...
John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)