I have a strange problem with a Atari Superman pin that I am working on for someone. B2 MC14514B on the I/o was burned up and Q71 that feeds Q100. So I replaced B2 and Q71 the put the board back and they both burn up again. I tested Q100 and thatlooks good. The odd thing is on Superman Q100 doesnt feed anything. There is no wire on J19 pin 9. So I pulled q71 just to make sure and then a bunch of the other predrive transistors burned up along with B2. Anyone have any ideas
Sysop: | Keyop |
---|---|
Location: | Huddersfield, West Yorkshire, UK |
Users: | 286 |
Nodes: | 16 (2 / 14) |
Uptime: | 84:56:59 |
Calls: | 6,495 |
Calls today: | 6 |
Files: | 12,097 |
Messages: | 5,276,965 |