I have a couple of broken latch plates on my reset bank causing some pins to lift immediately on reset, I don't have a part # (manual on order) has anyone dealt with this and knows a part number or possibly has some spares?Can you post a picture of a good one? I have some latch plates from pinball machines, but I don't know if they would fit. I worked on a manniken bowler a few years ago and it was definitely different from pinball.
On Tuesday, June 15, 2021 at 8:33:50 AM UTC-4, pinballtom264 wrote:Thanks for the response turns out PBR had some under a different part # that work perfect.
I have a couple of broken latch plates on my reset bank causing some pins to lift immediately on reset, I don't have a part # (manual on order) has anyone dealt with this and knows a part number or possibly has some spares?Can you post a picture of a good one? I have some latch plates from pinball machines, but I don't know if they would fit. I worked on a manniken bowler a few years ago and it was definitely different from pinball.
Pinworks
On Thursday, June 17, 2021 at 8:16:38 PM UTC-4, pinw...@bellsouth.net wrote:Please send me the part number. I have a long standing issue with a broken reset plate on a mannikin ball bowler that these may apply to.
On Tuesday, June 15, 2021 at 8:33:50 AM UTC-4, pinballtom264 wrote:Thanks for the response turns out PBR had some under a different part # that work perfect.
I have a couple of broken latch plates on my reset bank causing some pins to lift immediately on reset, I don't have a part # (manual on order) has anyone dealt with this and knows a part number or possibly has some spares?Can you post a picture of a good one? I have some latch plates from pinball machines, but I don't know if they would fit. I worked on a manniken bowler a few years ago and it was definitely different from pinball.
Pinworks
On Tuesday, June 22, 2021 at 9:56:57 AM UTC-4, pinballtom264 wrote:A-261-5
On Thursday, June 17, 2021 at 8:16:38 PM UTC-4, pinw...@bellsouth.net wrote:Please send me the part number. I have a long standing issue with a broken reset plate on a mannikin ball bowler that these may apply to.
On Tuesday, June 15, 2021 at 8:33:50 AM UTC-4, pinballtom264 wrote:Thanks for the response turns out PBR had some under a different part # that work perfect.
I have a couple of broken latch plates on my reset bank causing some pins to lift immediately on reset, I don't have a part # (manual on order) has anyone dealt with this and knows a part number or possibly has some spares?Can you post a picture of a good one? I have some latch plates from pinball machines, but I don't know if they would fit. I worked on a manniken bowler a few years ago and it was definitely different from pinball.
Pinworks
Thank you
On Wednesday, June 30, 2021 at 11:08:49 AM UTC-4, pinw...@bellsouth.net wrote:
On Tuesday, June 22, 2021 at 9:56:57 AM UTC-4, pinballtom264 wrote:A-261-5
On Thursday, June 17, 2021 at 8:16:38 PM UTC-4, pinw...@bellsouth.net wrote:Please send me the part number. I have a long standing issue with a broken reset plate on a mannikin ball bowler that these may apply to.
On Tuesday, June 15, 2021 at 8:33:50 AM UTC-4, pinballtom264 wrote:Thanks for the response turns out PBR had some under a different part # that work perfect.
I have a couple of broken latch plates on my reset bank causing some pins to lift immediately on reset, I don't have a part # (manual on order) has anyone dealt with this and knows a part number or possibly has some spares?Can you post a picture of a good one? I have some latch plates from pinball machines, but I don't know if they would fit. I worked on a manniken bowler a few years ago and it was definitely different from pinball.
Pinworks
Thank you
Sysop: | Keyop |
---|---|
Location: | Huddersfield, West Yorkshire, UK |
Users: | 296 |
Nodes: | 16 (2 / 14) |
Uptime: | 48:38:55 |
Calls: | 6,648 |
Files: | 12,198 |
Messages: | 5,329,988 |