1. Forum
  2. Usenet
  3. REC.GAMES.PINBALL

  • r Trek pinball

    From tony c@21:1/5 to All on Mon Sep 20 21:39:33 2021
    I am working on a star trek pinball. And when I apply power, it says F114 & F115 blow. Then it goes haywire and says row 1 thru row 8 grown shows. It won't let me into the test mode even won't let me turn down the volume. I need a little help here,
    besides replacing the fuse. where do I start?

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Joseph 'Tony' Dziedzic@21:1/5 to teampl...@gmail.com on Tue Sep 21 08:39:56 2021
    On Tuesday, September 21, 2021 at 12:39:39 AM UTC-4, teampl...@gmail.com wrote:
    I am working on a star trek pinball. And when I apply power, it says F114 & F115 blow. Then it goes haywire and says row 1 thru row 8 grown shows. It won't let me into the test mode even won't let me turn down the volume. I need a little help here,
    besides replacing the fuse. where do I start?
    Based on the reference to "F114 & F115" I'm ASSUMING this is a WPC-era Williams ST:TNG (helps to be specific).

    Your best bet is to read through the troubleshooting steps at www.pinwiki.com, and then pop back here with specific questions if you run into issues.

    Joseph "Tony" Dziedzic

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)