• Problems with Viking Rose

    From bnaka808@gmail.com@21:1/5 to All on Sun May 19 15:53:50 2019
    Larry, I've taken your advice, learned the Husqvarna Designer 1 machine & done everything possible to fix it that was in the service manual & online. Sensor still does not recognize hoop size. I've successfully adjusted & calibrated every step, except
    one - I can't get belt in embroidery arm to return to calibrated position - it always returns to various positions, leaving it off mark, so sensor senses hoop as being wrong. How do I adjust the belt calibration accuracy? Could it be needing a software
    update?

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From jamesonullmanwi@gmail.com@21:1/5 to All on Fri May 29 14:28:05 2020
    This is most definitely the spring or the switch it engages, im sorry they replaced all that, they do not know what they are doing apparently. I am a mechanic for our local shop... and yeah the lifter bar would have nothing to do with it as it is a cam
    on the presser foot lift paddle that engages the flat spring and in turn the switch.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)