• Corrosion And Refractory Selection Of The Feeder Port

    From Ron Parker@21:1/5 to refractory on Thu Sep 3 14:12:18 2015
    On Wed, 02 Sep 2015 02:44:01 +0000, refractory wrote:
    Feeding is one of the most important parts of the melting process and can affect the melting rate, glass quality and fuel consumption. The feeder port is one of the important parts and weak points of the glass furnaces. It is subjected to severe conditions and easily to be damaged.

    So glad you posted this. All of us recreational glass crafters were probably looking for refractory materials for our mass-production furnaces. I know
    I was.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From refractory@21:1/5 to All on Wed Sep 2 02:44:01 2015
    Feeding is one of the most important parts of the melting process and can affect the melting rate, glass quality and fuel consumption. The feeder port
    is one of the important parts and weak points of the glass furnaces. It is subjected to severe conditions and easily to be damaged.

    The feeder port consists of feeder pool and the front wall. It is subjected to the corrosion by molten glass, erosion by the batch materials and dust, wear
    by the liquid and the impact of the flame.

    The front wall usually adopts L-shaped block. Fused mullite block or AZS block is used. Its outside is insulated with ceramic fiber blanket.

    The feeder pool is a rectangular pool that protrudes outside the furnace. It
    is made up of the crown, sidewall and corner block. The crown and corner
    blocks of the feeder port is easily damaged.

    Its sidewall block adopts fused cast AZS, the same refractory with the
    sidewall of the melting zone.

    Since the feeder port does not have breast wall, its crown is lower than that of the melting zone. The crown is subjected to the impact of the flame and erosion by the dust. Fused cast AZS block with good corrosion resistance is used here.

    The corner block is subjected to high temperature, molten glass, chemical attack, and the thrust of the feeding machine. Fused cast AZS block 41# WS is used here and should be processed into round or hexagonal shape to reduce the hindrance. It should be thicker than the sidewall block to increase its weight and prevent the movement of the blocks. It should be cooled by air since it is heated in two sides and the heat dissipation area is small here.

    Zhengzhou Sunrise(http://www.sunriserefr.com) is a refractory material
    supplier from China, offering high quality refractory materials for glass furnaces, including fused cast AZS block, fused cast alumina block, fused cast high zirconia block, mullite brick, zircon brick, alumina bubble brick, magnesia brick, sillimanite brick, corundum brick, low porosity fireclay
    brick, high alumina brick, all kinds of glass furnace ramming masses, etc..

    --

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)