1. Forum
  2. Usenet
  3. REC.CRAFTS.WOODTURNING

  • oneway 1018

    From Electric Comet@21:1/5 to All on Fri Dec 8 12:32:16 2017
    seems like a good price

    https://newlondon.craigslist.org/tls/d/one-way-1018-wood-lathe/6394011130.html


    wonder if the headstock slides

    if not it is limited of course

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From russellseaton1@yahoo.com@21:1/5 to Electric Comet on Fri Dec 8 12:51:45 2017
    On Friday, December 8, 2017 at 2:32:18 PM UTC-6, Electric Comet wrote:
    seems like a good price

    https://newlondon.craigslist.org/tls/d/one-way-1018-wood-lathe/6394011130.html


    wonder if the headstock slides

    if not it is limited of course

    NO sliding. I think Oneway did offer an outboard tool rest, platform so you could turn on the other side of the headrest. But since it only has a 18" bed, you can stand at the end of the bed and reach the spindle easily. Its not like the bed is 36"
    long and you have to bend over it and reach. Would get a couple extra inches diameter on the outboard side. 10" over bed I think.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Electric Comet@21:1/5 to russellseaton1@yahoo.com on Sat Dec 9 11:21:30 2017
    On Fri, 8 Dec 2017 12:51:45 -0800 (PST)
    "russellseaton1@yahoo.com" <russellseaton1@yahoo.com> wrote:

    NO sliding. I think Oneway did offer an outboard tool rest, platform

    yeah it seems they offer outboard on their models

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From russellseaton1@yahoo.com@21:1/5 to Electric Comet on Sat Dec 9 15:47:52 2017
    On Saturday, December 9, 2017 at 1:21:32 PM UTC-6, Electric Comet wrote:
    On Fri, 8 Dec 2017 12:51:45 -0800 (PST)
    "russellseaton1@yahoo.com" <russellseaton1@yahoo.com> wrote:

    NO sliding. I think Oneway did offer an outboard tool rest, platform

    yeah it seems they offer outboard on their models

    Yes Oneway definitely offers outboard turning on their big lathes. Outboard bed, base, tool rest, etc. BUT, I think they ALSO offered the outboard equipment for this tiny, little, itty bitty 1018 mini lathe too. I guess the outboard bed would make
    sense for this mini lathe if it also added a couple inches to the diameter. Went from 10" diameter up to 16" maybe. But I can't really remember what Oneway had in the past. This 1018 model is no longer sold by Oneway.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)