On Sunday, December 9, 2018 at 2:44:03 PM UTC-6, SteveG wrote:
replying to Sierevello@aol.com , SteveG wrote:
Sierevello wrote:
I just picked up a Powermatic model 90 that was in good shape. It
needed to have the transformer, motor, and coil rewired for 220v 3
phase which I did today. It had a live center stuck in the tailstock
and I got that out today also. Also, the handwheel on the tailstock was gone but the stub was still there with the key way and woodruff key.
Off to the lathe and I had a new handwheel in about an hour.
Now comes the problem. My old chuck will not fit the 1 1/2-8 spindle thread. I have checked all of the chucks offered such as the Supernova
and the Oneway's and it looks like the only one that offers an adapter
is Oneway on their Stronghold Chuck.
Anybody have any suggestions on another chuck that will fit this lathe?
Thanks, Steve
https://teknatool.freshdesk.com/support/solutions/articles/19000041064-why-the-powermatic-90-and-conover-lathes-won-t-work-with-nova-chucks-adapters
I have not found an adapter or chuck that will fit my M-90 either....It is a very nice machine would like to keep it around...Please contact me if you found a solution
Kind Regards,
-Steve
--
Both Vicmarc 120 and Oneway Stronghold chucks have separate adaptors. Both offer adaptors in 1.5"x8tpi (1 1/2 x 8) threading that fits the Powermatic 90 lathe head. Just do a search for either of these chucks and you will see the adaptor offered.
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)