Ray Key in his videos promotes the practice of using paste wax as a
lubricant during sanding to reduce scratches.
He then follows this with a lacquer sealer that he cuts back with 0000
wire wool dipped in wax followed by a coat of wax polish to get a
semi-gloss finish.
Putting lacquer over a waxed surface doesn't make sense to me but I
wonder if anyone here has tried it.
Graham
On Saturday, November 17, 2018 at 5:05:31 PM UTC-6, graham wrote:
Ray Key in his videos promotes the practice of using paste wax as a
lubricant during sanding to reduce scratches.
He then follows this with a lacquer sealer that he cuts back with 0000
wire wool dipped in wax followed by a coat of wax polish to get a
semi-gloss finish.
Putting lacquer over a waxed surface doesn't make sense to me but I
wonder if anyone here has tried it.
Graham
Not having access to the video, are you sure he does not wipe the surface before putting the lacquer on?
Sysop: | Keyop |
---|---|
Location: | Huddersfield, West Yorkshire, UK |
Users: | 293 |
Nodes: | 16 (2 / 14) |
Uptime: | 226:10:28 |
Calls: | 6,624 |
Calls today: | 6 |
Files: | 12,171 |
Messages: | 5,318,697 |