I have a 2002 Cobra trailer which has Al-KO components. The handle on the nose support screw jack (sometimes called a Jockey Wheel) is becoming more difficult to rotate.
I took the jack apart to clean and re-grease it and found that the thrust bearing is broken which is located inside the top of the exterior tube nearest to the handle. You can find an image of my bearing at;
http://aviation.derosaweb.net/dropbox/bearing.JPG
I am having a heck of a time finding a replacement bearing. I bought a likely candidate from McMaster-Carr but it just isn't quite right (the ID and OD are good but the bearings themselves are bigger).
Anyone know the standard bearing part number for this part?
Thanks.
John (OHM Ω)
http://aviation.derosaweb.net/dropbox/bearing.JPG
I have a 2002 Cobra trailer which has Al-KO components. The handle on the nose support screw jack (sometimes called a Jockey Wheel) is becoming more difficult to rotate.
I took the jack apart to clean and re-grease it and found that the thrust bearing is broken which is located inside the top of the exterior tube nearest to the handle. You can find an image of my bearing at;
http://aviation.derosaweb.net/dropbox/bearing.JPG
I am having a heck of a time finding a replacement bearing. I bought a likely candidate from McMaster-Carr but it just isn't quite right (the ID and OD are good but the bearings themselves are bigger).
Anyone know the standard bearing part number for this part?
Thanks.
John (OHM Ω)
http://aviation.derosaweb.net/dropbox/bearing.JPG
Williams Soaring is a Cobra dealer and has many parts on hand. WilliamsSoaring.com
Sysop: | Keyop |
---|---|
Location: | Huddersfield, West Yorkshire, UK |
Users: | 285 |
Nodes: | 16 (2 / 14) |
Uptime: | 61:24:34 |
Calls: | 6,488 |
Calls today: | 1 |
Files: | 12,094 |
Messages: | 5,274,431 |