How to Install Official Samsung Galaxy J4 SM-J400M DS Stock Rom
If you are looking for a way to restore your Samsung Galaxy J4 SM-J400M DS to its original factory settings, then you are in the right place. In this article, we will show you how to download and install the official stock firmware for your device. This
will help you fix any issues such as bootloop, lag, or bugs that you may encounter on your phone.
Official Samsung Galaxy J4 SM-J400M DS Stock Rom
Download
https://1canfostaba.blogspot.com/?ls=2wGBy5
Before we begin, make sure you have the following prerequisites:
A Samsung Galaxy J4 SM-J400M DS device with at least 50% battery charge.
A Windows PC and a USB cable.
The latest Samsung USB drivers installed on your PC.
The official stock firmware file for your device model and region. You can download it from here or here.
The Odin flash tool. You can download it from here.
Once you have everything ready, follow these steps to install the stock firmware on your Samsung Galaxy J4 SM-J400M DS:
Extract the stock firmware file and the Odin tool on your PC.
Run the Odin tool as administrator.
Power off your phone and boot it into download mode by pressing and holding the Volume Down + Home + Power buttons together for a few seconds. Release the buttons when you see a warning screen and press Volume Up to confirm.
Connect your phone to your PC using the USB cable. The Odin tool should recognize your device and show a blue or green box in the ID:COM section.
Click on the AP button and browse to the extracted firmware file. It should have a .tar.md5 extension.
Make sure that only Auto Reboot and F. Reset Time options are checked in the Options tab.
Click on the Start button and wait for the flashing process to complete. It may take a few minutes.
Once done, your phone will reboot automatically and you will see a PASS message in Odin.
Disconnect your phone from your PC and enjoy the official stock firmware on your Samsung Galaxy J4 SM-J400M DS.
Congratulations! You have successfully installed the official stock firmware on your Samsung Galaxy J4 SM-J400M DS. If you have any questions or problems, feel free to leave a comment below.
If you want to learn more about the Samsung Galaxy J4 SM-J400M DS, here are some of its features and specifications:
The Samsung Galaxy J4 SM-J400M DS is a dual SIM smartphone that was launched in May 2018.
It has a 5.5-inch Super AMOLED display with a resolution of 720 x 1280 pixels and a 16:9 aspect ratio.
It is powered by a 1.4 GHz quad-core Exynos 7570 processor and 2 GB of RAM. It has 16 GB of internal storage that can be expanded up to 256 GB via a microSD card.
It has a 13 MP rear camera with f/1.9 aperture, autofocus, and LED flash. It also has a 5 MP front camera with f/2.2 aperture and LED flash.
It runs on Android 8.0 Oreo with Samsung Experience UI on top. It has a 3000 mAh removable battery that supports fast charging.
It supports Wi-Fi, Bluetooth, GPS, FM radio, microUSB 2.0, and 3.5 mm audio jack. It also has a fingerprint sensor, an accelerometer, a proximity sensor, and an ambient light sensor.
It is available in black, gold, lavender, and purple colors.
The Samsung Galaxy J4 SM-J400M DS is a budget-friendly smartphone that offers a decent performance and a good display. It is suitable for users who want a simple and reliable device for everyday use.
35727fac0c
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)