```
How to Flash Maximus P7 Plus with Care Firmware and Fix Fastboot Mode and FRP Lock
If you are looking for a way to flash your Maximus P7 Plus smartphone with the latest care firmware and fix the fastboot mode and FRP lock issues, then you have come to the right place. In this article, we will show you how to download the firmware file,
the flash tool, and the USB driver, and how to use them to flash your device. Follow the steps below carefully and make sure you have a backup of your data before proceeding.

Maximus P7 Plus Flash File Frp File Fastboot Mode Fix Care Firmware
Download File https://t.co/JJra97PPg6



What is Maximus P7 Plus Care Firmware?
Maximus P7 Plus Care Firmware is a stock ROM that is specially designed to fix some common problems that may occur on your device, such as fastboot mode, FRP lock, hang logo, dead recovery, etc. It is also a tested and verified firmware that can improve
the performance and stability of your device. You can download the care firmware file from the links below:


GP_MAXIMUS_BD_P7_Plus_ V07 _20190408
GP_MAXIMUS_BD_P7_Plus_ V10 _20190701

What is SP Flash Tool?
SP Flash Tool is a software application that allows you to flash firmware files on MediaTek-based devices. It is compatible with Windows and Linux operating systems and supports various formats of firmware files, such as scatter files, bin files, etc.
You can download the latest version of SP Flash Tool from the link below:


SP Flash Tool Download

What is MTK USB Driver?
MTK USB Driver is a driver that enables your computer to recognize and communicate with your MediaTek-based device. It is essential for flashing firmware files using SP Flash Tool. You can download the MTK USB Driver from the link below:


MTK USB Driver Download

How to Flash Maximus P7 Plus with Care Firmware?
Now that you have downloaded all the necessary files, you can follow these steps to flash your Maximus P7 Plus with care firmware:




Extract the firmware file and the SP Flash Tool on your computer.
Install the MTK USB Driver on your computer.
Run the SP Flash Tool as administrator.
Click on the Download tab and click on Choose in front of Scatter-loading File. Browse and select the scatter file from the extracted firmware folder.
Make sure all the partitions are checked and click on Download.
Turn off your device and remove the battery (if removable).
Connect your device to your computer via USB cable while holding the Volume Down or Volume Up button.
The flashing process will start automatically and you will see a green tick mark when it is completed.
Disconnect your device and insert the battery (if removable).
Turn on your device and enjoy the new firmware.

How to Fix Fastboot Mode and FRP Lock on Maximus P7 Plus?
If you face fastboot mode or FRP lock on your Maximus P7 Plus after flashing the firmware or doing a factory reset, don't worry. You can easily fix these issues by following these steps:


Open SP Flash Tool again and go to the Format tab.
Select Manual Format Flash option.
Open the scatter file from the extracted firmware folder with a text editor. Find FRP address and copy the linear start address and physical start address values.
Paste them in SP Flash Tool in Begin Address [HEX] and Format Length
35727fac0c

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)