1. Forum
  2. Usenet
  3. REC.ARTS.MOVIES.TECH

  • 16mm projector comparison???

    From jsandrade93@gmail.com@21:1/5 to All on Thu Oct 13 17:30:26 2016
    segunda-feira, 5 de Julho de 2004 às 20:27:36 UTC-3, Robert Morein escreveu:
    I'd appreciate input on the relative reliability of the following 16mm projectors:

    Eiki SSL-0
    Bell & Howell Filmosound
    ITT (can't remember the model #, was ubiquitous in high schools)

    Boa noite, gostaria de saber por gentileza se no projetor bell & howell mod 302 pode-se utilizar o amplificador do mod 8302, grato!

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Scott Dorsey@21:1/5 to jsandrade93@gmail.com on Fri Oct 14 08:56:04 2016
    In article <64291f80-ec76-4fcd-a183-5e6cb80f7074@googlegroups.com>,
    <jsandrade93@gmail.com> wrote:
    segunda-feira, 5 de Julho de 2004 =C3=A0s 20:27:36 UTC-3, Robert Morein esc= >reveu:
    I'd appreciate input on the relative reliability of the following 16mm
    projectors:
    =20
    Eiki SSL-0
    Bell & Howell Filmosound
    ITT (can't remember the model #, was ubiquitous in high schools)

    Boa noite, gostaria de saber por gentileza se no projetor bell & howell mod=
    302 pode-se utilizar o amplificador do mod 8302, grato!

    Yes. The 8302 is the same design as the 302, just made on contract in Japan.

    However, EVERY one of these units will have noisy amplifiers, they all need
    new capacitors in them. I would replace the selenium rectifiers too.
    --scott
    --
    "C'est un Nagra. C'est suisse, et tres, tres precis."

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)