How to Reset Samsung ML 1660 Printer Toner
If you have a Samsung ML 1660 printer and you need to reset the toner, you may have encountered a problem with the red light flashing and the printer not working. This is because the printer has a counter that tracks how many pages you have printed and
stops working when it reaches a certain limit. To fix this, you need to reset the counter using a software tool.

[Users Choice] Samsung Ml 1660 V1.01.00.34 Toner Resetl
Download https://t.co/fRnBEqZ8pZ



One of the tools that can help you reset the toner is Samsung ML 1660 V1.01.00.34 Toner Reset. This is a free program that you can download from this link. Before you use it, make sure you have the following requirements:


A Windows computer with a USB port
A USB cable to connect your printer to your computer
The printer driver installed on your computer
The printer turned on and connected to your computer
The toner cartridge installed in the printer

Once you have everything ready, follow these steps to reset your toner:


Download and extract the Samsung ML 1660 V1.01.00.34 Toner Reset file from the link above.
Open the folder and run the file named "fix1660.bat" as administrator.
A command prompt window will open and ask you to press any key to continue.
The program will detect your printer model and firmware version and ask you to confirm if they are correct.
If they are correct, press Y and then enter. If they are not correct, press N and then enter and try again.
The program will then ask you to turn off your printer and wait for 10 seconds. After 10 seconds, turn on your printer and wait for another 10 seconds.
The program will then ask you to press any key to continue.
The program will then flash your printer firmware with a modified version that resets the toner counter.
When the flashing is done, the program will ask you to turn off your printer and wait for 10 seconds.
After 10 seconds, turn on your printer and wait for another 10 seconds.
The program will then ask you to press any key to exit.
You can now close the command prompt window and enjoy your printer with a reset toner.

Note: This method may not work for all printers or firmware versions. Use it at your own risk. You may also lose your warranty by using this tool. If you encounter any problems or errors, please refer to this video tutorial [^1^] for more details and
troubleshooting tips.
Now that you have reset your toner, you may wonder how to check the toner level and how to replace the toner cartridge when it runs out. Here are some tips to help you with that:

How to Check the Toner Level
The Samsung ML 1660 printer does not have a display screen that shows the toner level. However, you can check the toner level using the printer driver on your computer. To do that, follow these steps:




Open the Start menu and click on Devices and Printers.
Right-click on your Samsung ML 1660 printer and select Printing Preferences. Click on the Maintenance tab and then click on Printer Status.
A window will pop up showing the toner level and other printer information.
You can also print a test page or a configuration report from this window.

How to Replace the Toner Cartridge
When the toner level is low or empty, you will need to replace the toner cartridge with a new one. To do that, follow these steps:


Open the front cover of the printer and pull out the toner cartridge.
Unpack a new toner cartridge and shake it gently to distribute the toner evenly.
Remove the protective tape from the new toner cartridge and insert it into the printer.
Close the front cover of the printer and wait for it to initialize.
You can now print with your new toner cartridge.

Note: You should use only genuine Samsung toner cartridges for your printer. Using non-genuine or refilled cartridges may damage your printer or reduce its print quality. You should also dispose of used toner cartridges properly according to local
regulations.
35727fac0c

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)