1. Forum
  2. Usenet
  3. MICROSOFT.PUBLIC.WORD.DOC

  • Print onto non standard size paper

    From tanktata@21:1/5 to All on Sat Jul 11 21:23:44 2020
    Hi everyone, new to the forum.

    I've been working on something at work where I need to print on non
    standard size paper. The dimensions of the paper are 210mmx100mm.

    I've managed to print out to this size of paper, but I need to be able
    to print close to top and bottom edges of the paper, and thats where
    I've encountered difficulty.

    I've tried to adjust paper size and margins but nothing seems to work.

    I'm not overly familiar with Microosoft Word so was wondering if anyone
    could suggest where I may be going wrong?




    --
    tanktata

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Peter T. Daniels@21:1/5 to tanktata on Sun Jul 12 05:41:54 2020
    There should be no problem setting you margins in Word to within 1/4
    inch (3 mm) of the edge of the paper, and since you discovered how to
    change the paper size and the margin size, maybe the problem is that
    your printer can't handle such a small margin?

    On Saturday, July 11, 2020 at 9:31:07 PM UTC-4, tanktata wrote:
    Hi everyone, new to the forum.

    I've been working on something at work where I need to print on non
    standard size paper. The dimensions of the paper are 210mmx100mm.

    I've managed to print out to this size of paper, but I need to be able
    to print close to top and bottom edges of the paper, and thats where
    I've encountered difficulty.

    I've tried to adjust paper size and margins but nothing seems to work.

    I'm not overly familiar with Microosoft Word so was wondering if anyone
    could suggest where I may be going wrong?

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)