• [PATCH] dt-bindings: fsl-imx-drm: Remove incorrect "@di0" usage

    From Philipp Zabel@21:1/5 to Marco Franchi on Mon Oct 2 14:30:02 2017
    Hi Marco,

    On Fri, 2017-09-22 at 15:05 -0300, Marco Franchi wrote:
    Improve the binding example by removing the '@di0' notation, which
    fixes the following build warning:

    Warning (unit_address_vs_reg): Node /display@di0 has a unit name, but 
    no reg property

    Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
    ---
     Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt | 2 +-
     1 file changed, 1 insertion(+), 1 deletion(-)

    diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-
    drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-
    drm.txt
    index f798547..44814f0 100644
    --- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
    +++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
    @@ -129,7 +129,7 @@ Optional properties:
     
     example:
     
    -display@di0 {
    +display-di0 {
      compatible = "fsl,imx-parallel-display";
      edid = [edid-data];
      interface-pix-fmt = "rgb24";

    Thank you for the patch. We certainly should get rid of the @di0
    notation. Since these nodes mostly describe the DISP0 and DISP1 pin
    groups controlled by the IOMUXC, I'd prefer to rename this to

    -display@di0 {
    +disp0 {

    instead, if that is fine with you.

    I'd also like to move the disp0/disp1 nodes into the SoC dtsi files to
    avoid having to duplicate port@0 all over the place.

    regards
    Philipp

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)