Hello Kristoffer!

On 9/23/21 11:10, kristofferfin@tuta.io wrote:

After upgrading to 5.14.6, both my G5 and G4 machines won't boot with this kernel. They stop at this: .... ata1.00 failed to set xfermode (err_mask = 0x40)
There was not a problem with 5.10.3 and 5.10.8 or at least went thru with that part.
Both machines are equipped with the SSDs.

You are the first to report this issue but I haven't tested this kernel on my own
hardware yet. Let's wait for others on this list to chime in and see if they have
run into the problem as well.

If others can reproduce the problem, it's time for bisecting the kernel.

Adrian

--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On Thu, Sep 23, 2021 at 11:13:52AM +0200, John Paul Adrian Glaubitz wrote:

Hello Kristoffer!

On 9/23/21 11:10, kristofferfin@tuta.io wrote:

After upgrading to 5.14.6, both my G5 and G4 machines won't boot with this kernel. They stop at this: .... ata1.00 failed to set xfermode (err_mask = 0x40)
There was not a problem with 5.10.3 and 5.10.8 or at least went thru with that part.
Both machines are equipped with the SSDs.

You are the first to report this issue but I haven't tested this kernel on my own
hardware yet. Let's wait for others on this list to chime in and see if they have
run into the problem as well.

If others can reproduce the problem, it's time for bisecting the kernel.

I just rebooted my iBook G4 with the 5.14.6 kernel, running 5.10.46
previously. My machine still has the original 4200 RPM disk and I didn't
get stuck there.

--
Efraim Flashner <efraim@flashner.co.il> רנשלפ םירפא
GPG key = A28B F40C 3E55 1372 662D 14F7 41AA E7DC CA3D 8351
Confidentiality cannot be guaranteed on emails sent or received unencrypted

-----BEGIN PGP SIGNATURE-----

iQIzBAABCgAdFiEEoov0DD5VE3JmLRT3Qarn3Mo9g1EFAmFMYcIACgkQQarn3Mo9 g1HLdRAAmvRXdboGmO6eD/r+fGyzaBKuOwBVlbAQaeRxDrYJteAoiSfubKG5KVtl dO5kpWKEUcDN1FjnHefqF3XCyD0yXwOPBH1Ez/Bb2eBqcNqFGMUF3f8OJgZ9WBYl k2Y0k15JPe56CJoyMr2Q06bMpyS5+ZVY40k320Kb0TNStZLNkmfyzvWZy/rJ1Cy8 c2/9JcEDRImq8Jn58tpeeeQZMFuhfWLGPx5Ja4/eLYEsfnBZLsj7x68BehaFg4oE a6u7TTha3qebsdvNSqUBhLnIq+8XKd3xGem6QIo4VvnoyYRNMFYJqrngDcicnb8K g0K+y+4G+dA5f+PvRBIemQqlN7nTOI3FH+Vs427o9WD/OqgDUgFRTI4k+pJYhvqa Ulbo+ojJCCKK31gBLU2A4dQ9M1c8210s/8z7ywZ1RMmRIkImGwZzEuiJIWH9w0Cp rbuLoQu/kAdyNSHOuSvRqYMVyr1JgXuumD4Ppp53rwbVL7aZvm9qHTIbC5Iz/f6O l6D+MlJIPRLN+sE3VcWNyNMqrSIJMYbm0RyIo7rMofxLTH4vC+wkvcQDCuYH5dnI 1YmcIf1cm7tnl9OSETvTf8KxekiT+W4a2VaHhyia/cGyYWCq6pDKENwXK1OMiAED 7u/jJy8Pq9ZiEnvpPFwqKCxG3CUOT4hB+uzMBa26VlqeX6CYLSQ=

Hello,


On 2021-09-23 10:13:52 +0100 John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> wrote:

Hello Kristoffer!

On 9/23/21 11:10, kristofferfin@tuta.io wrote:

After upgrading to 5.14.6, both my G5 and G4 machines won't boot
with this
kernel. They stop at this: .... ata1.00 failed to set xfermode
(err_mask =
0x40)
There was not a problem with 5.10.3 and 5.10.8 or at least went thru
with
that part.
Both machines are equipped with the SSDs.

You are the first to report this issue but I haven't tested this
kernel on my
own
hardware yet. Let's wait for others on this list to chime in and see
if they
have
run into the problem as well.

If others can reproduce the problem, it's time for bisecting the
kernel.

On my iMac G5 with serial ata (buit still the original apple spinning
rust HDD inside) all seems fine:

[ 0.908371] libata version 3.00 loaded.
[ 1.363301] pata-pci-macio 0001:02:0d.0: enabling device (0000 ->
0002)
[ 1.382290] pata-pci-macio 0001:02:0d.0: Activating pata-macio
chipset Shasta ATA-6, Apple bus ID 3
[ 1.390594] scsi host0: pata_macio
[ 1.391343] ata1: PATA max UDMA/133 irq 38
[ 1.552920] ata1.00: ATAPI: MATSHITADVD-R UJ-846, FA0G, max
UDMA/66
[ 1.565777] ata1.00: K2/Shasta alignment limits applied
[ 3.280150] sata_svw 0001:02:0c.0: version 2.3
[ 3.326633] scsi host1: sata_svw
[ 3.446662] scsi host2: sata_svw
[ 3.538050] scsi host3: sata_svw
[ 3.636359] scsi host4: sata_svw
[ 3.721705] ata2: SATA max UDMA/133 mmio m8192@0x80102000 port
0x80102000 irq 18
[ 3.732549] ata3: SATA max UDMA/133 mmio m8192@0x80102000 port
0x80102100 irq 18
[ 3.743191] ata4: SATA max UDMA/133 mmio m8192@0x80102000 port
0x80102200 irq 18
[ 3.753840] ata5: SATA max UDMA/133 mmio m8192@0x80102000 port
0x80102300 irq 18
[ 4.110612] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.124825] ata2.00: ATA-7: Maxtor 6L250M0, BANC1G10, max UDMA/133
[ 4.135634] ata2.00: 490234752 sectors, multi 0: LBA48 NCQ (not
used)
[ 4.155100] ata2.00: configured for UDMA/133
[ 4.593209] ata3: SATA link down (SStatus 4 SControl 300)
[ 5.645820] ata4: failed to resume link (SControl 0)
[ 5.657679] ata4: SATA link down (SStatus 0 SControl 0)
[ 6.725830] ata5: failed to resume link (SControl 0)
[ 6.741523] ata5: SATA link down (SStatus 0 SControl 0)
[ 9.138995] EXT4-fs (sda4): mounted filesystem with ordered data
mode. Opts: (null). Quota mode: none.
[ 25.226642] cfg80211: Loading compiled-in X.509 certificates for
regulatory database
[ 29.050599] EXT4-fs (sda3): mounted filesystem with ordered data
mode. Opts: (null). Quota mode: none.


Riccardo


--
Sent with GNUMail from GNUstep on a Raspberry PI 4.

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

Hi!

On 9/26/21 15:17, Riccardo Mottola wrote:

On my iMac G5 with serial ata (buit still the original apple spinning rust HDD inside) all seems fine:

As Anatoly already found out, it's an issue limited to SSDs, see:

https://bugzilla.kernel.org/show_bug.cgi?id=195895

Adrian

--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)